Support to show diagnostics on the tab switcher in the same way they are
displayed on the tab bar. This follows the setting
`tabs.show_diagnostics`.
This will improve user experience when disabling the tab bar and still
being able to see the diagnostics when switching tabs
Preview:
<img width="768" height="523" alt="Screenshot From 2025-07-16 11-02-42"
src="https://github.com/user-attachments/assets/308873ba-0458-485d-ae05-0de7c1cdfb28"
/>
Release Notes:
- Added diagnostics indicators to the tab switcher
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Similar to nvim's telescope this makes it easier to find the right tab
in the list.
The preview takes place in the pane where the tab resides.
- on dismiss: We restore all panes.
- on confirm: We restore all panes except the one where the selected tab
resides. For this reason we collect the active item for each pane before
the tabswither starts.
Release Notes:
- Improved tab switcher, it now shows a preview of the selected tab
Co-authored-by: Julia Ryan <juliaryan3.14@gmail.com>
Closes #ISSUE
Adds a new `documentation` method to actions, that is extracted from doc
comments when using the `actions!` or derive macros.
Additionally, this PR adds doc comments to as many action definitions in
Zed as possible.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Instead of a menagerie of macros for implementing `Action`, now there
are just two:
* `actions!(editor, [MoveLeft, MoveRight])`
* `#[derive(..., Action)]` with `#[action(namespace = editor)]`
In both contexts, `///` doc comments can be provided and will be used in
`JsonSchema`.
In both contexts, parameters can provided in `#[action(...)]`:
- `namespace = some_namespace` sets the namespace. In Zed this is
required.
- `name = "ActionName"` overrides the action's name. This must not
contain "::".
- `no_json` causes the `build` method to always error and
`action_json_schema` to return `None`
and allows actions not implement `serde::Serialize` and
`schemars::JsonSchema`.
- `no_register` skips registering the action. This is useful for
implementing the `Action` trait
while not supporting invocation by name or JSON deserialization.
- `deprecated_aliases = ["editor::SomeAction"]` specifies deprecated old
names for the action.
These action names should *not* correspond to any actions that are
registered. These old names
can then still be used to refer to invoke this action. In Zed, the
keymap JSON schema will
accept these old names and provide warnings.
- `deprecated = "Message about why this action is deprecation"`
specifies a deprecation message.
In Zed, the keymap JSON schema will cause this to be displayed as a
warning. This is a new feature.
Also makes the following changes since this seems like a good time to
make breaking changes:
* In `zed.rs` tests adds a test with an explicit list of namespaces. The
rationale for this is that there is otherwise no checking of `namespace
= ...` attributes.
* `Action::debug_name` renamed to `name_for_type`, since its only
difference with `name` was that it
* `Action::name` now returns `&'static str` instead of `&str` to match
the return of `name_for_type`. This makes the action trait more limited,
but the code was already assuming that `name_for_type` is the same as
`name`, and it requires `&'static`. So really this just makes the trait
harder to misuse.
* Various action reflection methods now use `&'static str` instead of
`SharedString`.
Release Notes:
- N/A
This PR replaces some `update()` calls with either `read()` or
`read_with()` when the `update()` call performed read-only operations on
the entity.
Many more likely exist, will follow-up with more PRs.
Release Notes:
- N/A
resolves#24655resolves#23945
I haven't yet added a default binding for the new command. #27797 added `:ls` and
`:buffers` which in my opinion should use the global searchable version
given that that matches the vim semantics of those commands better than
just showing the tabs in the local pane.
There's also a question of what to do when you select a tab from another
pane, should the focus jump to that pane or should that tab move to the
currently focused pane? For now I've implemented the former.
Release Notes:
- Added `tab_switcher::ToggleAll` to search open tabs from all panes and focus the selected one.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This adds a "workspace-hack" crate, see
[mozilla's](https://hg.mozilla.org/mozilla-central/file/3a265fdc9f33e5946f0ca0a04af73acd7e6d1a39/build/workspace-hack/Cargo.toml#l7)
for a concise explanation of why this is useful. For us in practice this
means that if I were to run all the tests (`cargo nextest r
--workspace`) and then `cargo r`, all the deps from the previous cargo
command will be reused. Before this PR it would rebuild many deps due to
resolving different sets of features for them. For me this frequently
caused long rebuilds when things "should" already be cached.
To avoid manually maintaining our workspace-hack crate, we will use
[cargo hakari](https://docs.rs/cargo-hakari) to update the build files
when there's a necessary change. I've added a step to CI that checks
whether the workspace-hack crate is up to date, and instructs you to
re-run `script/update-workspace-hack` when it fails.
Finally, to make sure that people can still depend on crates in our
workspace without pulling in all the workspace deps, we use a `[patch]`
section following [hakari's
instructions](https://docs.rs/cargo-hakari/0.9.36/cargo_hakari/patch_directive/index.html)
One possible followup task would be making guppy use our
`rust-toolchain.toml` instead of having to duplicate that list in its
config, I opened an issue for that upstream: guppy-rs/guppy#481.
TODO:
- [x] Fix the extension test failure
- [x] Ensure the dev dependencies aren't being unified by Hakari into
the main dependencies
- [x] Ensure that the remote-server binary continues to not depend on
LibSSL
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
- Truncate branch names based on the width of the picker
- Use a footer for "Create branch" instead of a picker entry
Still to do:
- [x] Select the footer button when no matches and run the create logic
on `enter`
- [x] Make it possible to quickly select the footer button from the
keyboard when there are matches
Release Notes:
- Git Beta: Removed limitation that made it impossible to create a
branch from the branch picker when it too closely resembled an existing
branch name
The close button on each tab previously only worked when you right
clicked it, presumably because on macos people were using `ctrl+tab` to
open the picker, and clicking with `ctrl` held registers as a right
click. Now it should work with either mouse button.
Release Notes:
- N/A
Co-authored-by: Conrad <conrad@zed.dev>
Closes#10167
This is take 2 on https://github.com/zed-industries/zed/pull/2341 which
was closed due to lack of migrator.
This PR contains rename of following keymap actions:
```sh
1. ["editor::GoToPrevHunk", { "center_cursor": true }] -> ["editor::GoToPreviousHunk", { "center_cursor": true }]
2. "editor::GoToPrevDiagnostic" -> "editor::GoToPreviousDiagnostic"
3. "editor::ContextMenuPrev" -> "editor::ContextMenuPrevious"
4. "search::SelectPrevMatch" -> "search::SelectPreviousMatch"
5. "file_finder::SelectPrev" -> "file_finder::SelectPrevious"
6. "menu::SelectPrev" -> "menu::SelectPrevious"
7. "editor::TabPrev" -> "editor::Backtab"
```
Release Notes:
- Renamed several keymap actions for consistency (e.g., `GoToPrevHunk` →
`GoToPreviousHunk`, `TabPrev` → `Backtab`). Your existing configured
keybindings will still work. You can click **"Backup and Update"** at
the top of your keymap file to easily update to the new actions.
Co-authored-by: Joseph T. Lyons <JosephTLyons@gmail.com>
- [x] snake case keymap properties
- [x] flatten actions
- [x] keymap migration + notfication
- [x] settings migration + notification
- [x] inline completions -> edit predictions
### future:
- keymap notification doesn't show up on start up, only on keymap save.
this is existing bug in zed, will be addressed in seperate PR.
Release Notes:
- Added a notification for deprecated settings and keymaps, allowing you
to migrate them with a single click. A backup of your existing keymap
and settings will be created in your home directory.
- Modified some keymap actions and settings for consistency.
---------
Co-authored-by: Piotr Osiewicz <piotr@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
There's still a bit more work to do on this, but this PR is compiling
(with warnings) after eliminating the key types. When the tasks below
are complete, this will be the new narrative for GPUI:
- `Entity<T>` - This replaces `View<T>`/`Model<T>`. It represents a unit
of state, and if `T` implements `Render`, then `Entity<T>` implements
`Element`.
- `&mut App` This replaces `AppContext` and represents the app.
- `&mut Context<T>` This replaces `ModelContext` and derefs to `App`. It
is provided by the framework when updating an entity.
- `&mut Window` Broken out of `&mut WindowContext` which no longer
exists. Every method that once took `&mut WindowContext` now takes `&mut
Window, &mut App` and every method that took `&mut ViewContext<T>` now
takes `&mut Window, &mut Context<T>`
Not pictured here are the two other failed attempts. It's been quite a
month!
Tasks:
- [x] Remove `View`, `ViewContext`, `WindowContext` and thread through
`Window`
- [x] [@cole-miller @mikayla-maki] Redraw window when entities change
- [x] [@cole-miller @mikayla-maki] Get examples and Zed running
- [x] [@cole-miller @mikayla-maki] Fix Zed rendering
- [x] [@mikayla-maki] Fix todo! macros and comments
- [x] Fix a bug where the editor would not be redrawn because of view
caching
- [x] remove publicness window.notify() and replace with
`AppContext::notify`
- [x] remove `observe_new_window_models`, replace with
`observe_new_models` with an optional window
- [x] Fix a bug where the project panel would not be redrawn because of
the wrong refresh() call being used
- [x] Fix the tests
- [x] Fix warnings by eliminating `Window` params or using `_`
- [x] Fix conflicts
- [x] Simplify generic code where possible
- [x] Rename types
- [ ] Update docs
### issues post merge
- [x] Issues switching between normal and insert mode
- [x] Assistant re-rendering failure
- [x] Vim test failures
- [x] Mac build issue
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Joseph <joseph@zed.dev>
Co-authored-by: max <max@zed.dev>
Co-authored-by: Michael Sloan <michael@zed.dev>
Co-authored-by: Mikayla Maki <mikaylamaki@Mikaylas-MacBook-Pro.local>
Co-authored-by: Mikayla <mikayla.c.maki@gmail.com>
Co-authored-by: joão <joao@zed.dev>
When the user closes a tab, the tab switcher will now select the tab at
the same position. This feature is especially relevant for keyboard
users when you want to close multiple consecutive tabs with
`<Ctrl-Backspace>`.
Please see the discussion at
https://github.com/zed-industries/zed/discussions/22791 for full
motivation and the quick demo.
Release Notes:
- tab_switcher: Preserve selected position when tab is closed
First, parse the output of `git status --porcelain=v1` into a
representation that can handle the full "grammar" and doesn't lose
information.
Second, as part of pushing this throughout the codebase, expand the use
of the existing `GitSummary` type to all the places where status
propagation is in play (i.e., anywhere we're dealing with a mix of files
and directories), and get rid of the previous `GitSummary ->
GitFileStatus` conversion.
- [x] Synchronize new representation over collab
- [x] Update zed.proto
- [x] Update DB models
- [x] Update `GitSummary` and summarization for the new `FileStatus`
- [x] Fix all tests
- [x] worktree
- [x] collab
- [x] Clean up `FILE_*` constants
- [x] New collab tests to exercise syncing of complex statuses
- [x] Run it locally and make sure it looks good
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
Also:
* Adds `impl_internal_actions!` for deriving the `Action` trait without
registering.
* Removes some deserializers that immediately fail in favor of
`#[serde(skip)]` on fields where they were used. This also omits them
from the schema.
Release Notes:
- Keymap settings file now has more JSON schema information to inform
`json-language-server` completions and info, particularly for actions
that take input.
- [x] Rewrite worktree git handling
- [x] Fix tests
- [x] Fix `test_propagate_statuses_for_repos_under_project`
- [x] Replace `WorkDirectoryEntry` with `WorkDirectory` in
`RepositoryEntry`
- [x] Add a worktree event for capturing git status changes
- [x] Confirm that the local repositories are correctly updating the new
WorkDirectory field
- [x] Implement the git statuses query as a join when pulling entries
out of worktree
- [x] Use this new join to implement the project panel and outline
panel.
- [x] Synchronize git statuses over the wire for collab and remote dev
(use the existing `worktree_repository_statuses` table, adjust as
needed)
- [x] Only send changed statuses to collab
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.com>
Co-authored-by: Nathan <nathan@zed.dev>
* Remove unnecessary WindowContext and ViewContext '_ lifetimes
* Removed some cases where WindowContext has a different name than `cx`.
Release Notes:
- N/A
- Adds the Switch component
- Updates `Selected`, `Selectable` -> `ToggleState`, `Toggleable`
- Adds `checkbox` and `switch` functions to align better with other
elements in our layout system.
We decided not to merge Switch and Checkbox. However, in a followup I'll
introduce a Toggle or AnyToggle enum so we can update
`CheckboxWithLabel` -> `ToggleWithLabel` as this component will work
exactly the same with either a Checkbox or a Switch.
Release Notes:
- N/A
Release Notes:
- Fixed tab switcher icons not respecting the `tabs.git_status` setting.
Fixes an issue mentioned in
https://github.com/zed-industries/zed/pull/17115#issuecomment-2378966170
- file icons in the tab switcher weren't colored according to git
status, even if `tabs.git_status` was set to true.
I used a similar approach I saw in other places of the project to get
the project entry and its git status, but maybe we could move the
coloring logic entirely to `tab_icon()`? Wouldn't this break anything?
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
I found tab switcher file icons to be missing. They were mentioned in
the [initial tab switcher
issue](https://github.com/zed-industries/zed/issues/7653), but left to
be added later (mentioned in
https://github.com/zed-industries/zed/pull/7987).
I also noticed that the project search icon went missing, but I'm not
sure if that's intentional. These changes re-introduce it, as it's
provided by the generic `tab_icon()` function.
There's a small difference between the terminal item and everything
else, because terminal's `tab_content` returns a slightly different
layout, which adds a little more space between the icon and text. I'll
look into resolving this withouth changing too much stuff around in the
terminal crate. If you have any ideas on how to do this well, please
comment.
The new `tab_switcher` config section only has a single boolean option -
`show_icons`. It toggles between icons and not icons, but doesn't
disable the terminal icon. Implementing this would probably also require
some refactoring in terminal's `tab_content` function.
Release Notes:
- Added file icons to the tab switcher
Screenshot:
This PR renames and added a new pane event to indicate the difference
between `removing` and `removed` event. This change is needed for the
debugger implementation, if you close a pane we have to send a
`terminateThread` request to the adapter because it's not supported to
reopen a pane. So when the pane is removing we have to know what thread
it is what is stored on the panel itself, so we have to be able to get
this information before the pane is actually removed.
So my idea how to fix this was by adding a new event called
`RemovedItem` which is a rename of `RemoveItem` which also makes a bit
more sense because the item is removed at that point. And seeing the
name `RemoveItem` does not really say that it's removed, more like we
are removing the item.
/cc @mikayla-maki
Release Notes:
- N/A
Additionally, I've generalized the implementation of tab switcher so
that - instead of explicitly listing panels it supports (at the time of
writing it was just the terminal panel and nothing else), it now relies
on Panel::pane trait method. As long as that's implemented, you get a
tab switcher support for free.
Release Notes:
- Added support for tab switcher in Assistant panel.
This PR adds the missing workspace lint configuration for the following
crates that were missing it:
- `google_ai`
- `open_ai`
- `tab_switcher`
Release Notes:
- N/A
<img width="1637" alt="image"
src="https://github.com/zed-industries/zed/assets/482957/5aaec657-3499-42c9-9528-c83728f2a7a1">
Release Notes:
- Added a new ambient context feature that allows showing the model up
to three buffers (along with their diagnostics) that the user interacted
with recently.
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
This PR implements the preview tabs feature from VSCode.
More details and thanks for the head start of the implementation here
#6782.
Here is what I have observed from using the vscode implementation ([x]
-> already implemented):
- [x] Single click on project file opens tab as preview
- [x] Double click on item in project panel opens tab as permanent
- [x] Double click on the tab makes it permanent
- [x] Navigating away from the tab makes the tab permanent and the new
tab is shown as preview (e.g. GoToReference)
- [x] Existing preview tab is reused when opening a new tab
- [x] Dragging tab to the same/another panel makes the tab permanent
- [x] Opening a tab from the file finder makes the tab permanent
- [x] Editing a preview tab will make the tab permanent
- [x] Using the space key in the project panel opens the tab as preview
- [x] Handle navigation history correctly (restore a preview tab as
preview as well)
- [x] Restore preview tabs after restarting
- [x] Support opening files from file finder in preview mode (vscode:
"Enable Preview From Quick Open")
I need to do some more testing of the vscode implementation, there might
be other behaviors/workflows which im not aware of that open an item as
preview/make them permanent.
Showcase:
https://github.com/zed-industries/zed/assets/53836821/9be16515-c740-4905-bea1-88871112ef86
TODOs
- [x] Provide `enable_preview_tabs` setting
- [x] Write some tests
- [x] How should we handle this in collaboration mode (have not tested
the behavior so far)
- [x] Keyboard driven usage (probably need workspace commands)
- [x] Register `TogglePreviewTab` only when setting enabled?
- [x] Render preview tabs in tab switcher as italic
- [x] Render preview tabs in image viewer as italic
- [x] Should this be enabled by default (it is the default behavior in
VSCode)?
- [x] Docs
Future improvements (out of scope for now):
- Support preview mode for find all references and possibly other
multibuffers (VSCode: "Enable Preview From Code Navigation")
Release Notes:
- Added preview tabs
([#4922](https://github.com/zed-industries/zed/issues/4922)).
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
tab switcher retrieves active pane from workspace, but that function is
not aware of Terminal Panel's pane. Thus in this PR we retrieve it
manually and use it as the active pane if terminal panel has focus.
Release Notes:
- Fixed tab switcher not working in terminal panel.
The Tab Switcher implementation (#7653):
- `ctrl-tab` opens the Tab Switcher and moves selection to the
previously selcted tab. It also cycles selection forward.
- `ctrl-shift-tab` opens the Tab Switcher and moves selection to the
last tab in the list. It also cycles selection backward.
- Tab is selected and the Tab Switcher is closed on the shortcut
modifier key (`ctrl` by default) release.
- List items are in reverse activation history order.
- The list reacts to the item changes in background (new tab, tab
closed, tab title changed etc.)
Intentionally not in scope of this PR:
- File icons
- Close buttons
I will come back to these features. I think they need to be implemented
in separate PRs, and be synchronized with changes in how tabs are
rendered, to reuse the code as it's done in the current implementation.
The Tab Switcher looks usable even without them.
Known Issues:
Tab Switcher doesn't react to mouse click on a list item. It's not a tab
switcher specific problem, it looks like ctrl-clicks are not handled the
same way in Zed as cmd-clicks. For instance, menu items can be activated
with cmd-click, but don't react to ctrl-click. Since the Tab Switcher's
default keybinding is `ctrl-tab`, the user can only click an item with
`ctrl` pushed down, thus preventing `on_click()` from firing.
fixes#7653, #7321
Release Notes:
- Added Tab Switcher which is accessible via `ctrl-tab` and
`ctrl-shift-tab` (#7653) (#7321)
Related issues:
- Unblocks #7356, I hope 😄
How it looks and works (it's only `ctrl-tab`'s and `ctrl-shift-tab`'s,
no `enter`'s or mouse clicks):
https://github.com/zed-industries/zed/assets/2101250/4ad4ec6a-5314-481b-8b35-7ac85e43eb92
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
