This addresses #17746 by marking entries when they're opened in the
project panel.
I think that was the original intention behind the code too, because it
explicitly marks entries before opening them. An event that is emitted
by the workspace reset the mark though.
So what I did was try to emulate the logic I saw in VS Code: when
opening the file, mark it, when the active entry changes, unmark it,
except if you explicitly marked a group of files.
Closes#17746
Release Notes:
- Changed project panel to mark files when opening them, which should
make it more intuitive to mark multiple files after opening a single
one.
Makes repl actions that are specific to running kernels only come up
after a session has been started at least once for the editor.
Release Notes:
- Only show session oriented `repl::` actions for editors after a
session has been created
PR #20154 introduced a regression and essentially disabled preview tabs
in code.
This fixes it and restores the old preview tabs behavior.
Release Notes:
- Fixed preview tabs being disabled in code, even if they were enabled
in the settings.
Co-authored-by: Piotr <piotr@zed.dev>
Closes https://github.com/zed-industries/zed/issues/16568
This PR introduces some changes to how we display models in the model
selector within the assistant panel. Basically, it comes down to this:
- If you don't have any provider configured, you should see _all_
available models in the picker
- But, once you've configured some, you should _only_ see models from
them in the picker
Visually, nothing's changed much aside from the added "Configured
Models" label at the top to ensure the understanding that that's a list
of, well, configured models only. 😬
<img width="700" alt="Screenshot 2024-11-07 at 23 42 41"
src="https://github.com/user-attachments/assets/219ed386-2318-43a6-abea-1de0cda8dc53">
Release Notes:
- Change model selector in the assistant panel to only show configured
models
Closes https://github.com/zed-industries/zed/issues/13414
Just polishing up how some of these look. Ever since the issue was
opened, we added the "Error" label to the button, as well as
automatically popping open the toast error whenever that happens.
Lastly, there's a tooltip in there as well indicating that you can click
on it to see the details of the error.
<img width="700" alt="Screenshot 2024-11-08 at 00 26 27"
src="https://github.com/user-attachments/assets/ad0962e6-4621-4e8b-be0d-103d71fcf2e6">
Release Notes:
- N/A
There are two issues with too/list and prompt/list at the moment. We
serialize params to `null`, which is not correct according to
context_server spec. While it IS allowed by JSON RPC spec to omit
params, it turns out some servers currently missbehave and don't respect
this. So we do two things
- We omit params if it would be a null value in json.
- We explicitly set params to {} for tool/list and prompt/list to avoid
it being omitted.
Release Notes:
- N/A
Closes#18341
* [x] Remove "Change Kernel" Doc link from REPL menu
* [x] Remove chevron
* [x] Set a higher min width
* [x] Include the language along with the kernel name
Future PRs will address
* Add support for Python envs (#18291, #16757, #15563)
* Add support for Remote kernels
* Project settings support (#16898)
Release Notes:
- Added kernel picker for repl
---------
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
This PR prevents `[]` from being sanitized into an empty string and thus
becoming a "valid", clickable file link in the integrated terminal.
Whenever you type `[]` into the terminal and hover over it while
pressing `cmd`, an empty popup appears and the cursor indicates that
this is a clickable element. Once you click on the brackets, the
worktree root is selected and focused within the file picker.
<img width="87" alt="grafik"
src="https://github.com/user-attachments/assets/01790323-88be-4373-a1ec-a345bcf2521e">
This is because in #2906 support was added for sanititzing file links
like `[/some/path/[slug].tsx]` to `/some/path/[slug].tsx`. In the case
`[]` where an empty string is returned from the sanitation, the string
is considered a valid file path and thus `[]` becomes a valid and
clickable navigation target.
Given that this an edge-case just for this specific one set of brackets
and otherwise no empty strings are matched from the regexes `URL_REGEX`
and `WORD_REGEX`, it seemed that this was the best place to fix this
bug.
Release Notes:
- `[]` is no longer considered a clickable link in the terminal
This PR reworks how the Assistant Panel references slash commands,
context servers, and tools.
Previously we were always reading them from the global registries, but
now we store individual collections on each Assistant Panel instance so
that there can be different ones registered for each project.
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Joseph <joseph@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Closes https://github.com/zed-industries/zed/issues/20187
Make outline panel more eager to open its entries:
* scroll editor to selected outline entries (before it required an extra
`"outline_panel::Open", { "change_selection": false }` action call)
* make any `Open` action call to behave like `"outline_panel::Open", {
"change_selection": true }` and remove the redundant parameter.
Now opening an entry is equal to double clicking the same entry: the
editor gets scrolled and its selection changes
* add a way to open entries the same way as excerpts are open in multi
buffers (will open the entire file, scroll and place the caret)
* additionally, fix another race issue that caused wrong entry to be
revealed after the selection change
Release Notes:
- Improved outline panel keyboard navigation
This fixes#15995 by adding a `project panel: remove from project`
action that can be used in a keybinding.
Release Notes:
- Added a `project panel: remove from project` action so that users can
now add a keybinding to trigger it: `project_panel::RemoveFromProject`.
This avoids inline completions being shown (and overriding `<tab>`
behavior) when a snippet is active and the user wants to go through
snippet placeholders with `<tab>`.
Easy to reproduce:
Open a Rust file and use the `tfn` snippet to produce a test function.
Delete the placeholder. Without the change here, the inline provider
would suggest a function name. If you `<tab>`, you accept it, but then
you can't `<tab>` into the function body.
With this change the inline completions are deactivated as long as a
snippet is active.
Closes#19484
Release Notes:
- Fixed inline completions (Copilot, Supermaven, ...) taking over when a
snippet completion was active. That resulted in `tab` not working to
jump to the next placeholder in the snippet.
Follow up to https://github.com/zed-industries/zed/pull/20242
This PR ensures all the actions to the right of the project search
inputs have the same minimum width, ensuring that the inputs themselves
are always aligned. In the previous PR, I didn't considered the scenario
where the project search numbers where beyond 4 or 5 digits, which then
increased their width. This should be treated now!
<img width="700" alt="Screenshot 2024-11-07 at 09 55 11"
src="https://github.com/user-attachments/assets/7a9d8ebd-b575-4141-9242-3044f00150c5">
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/18255
Zed does not scroll always, but only if the item is out of sight, this
is preserved for now.
Otherwise, if the item is out of sight, project and outline panels + the
syntax tree view now attempt to scroll it into the middle, if there's
enough elements above and below.
Release Notes:
- Improved revealing items for outline and project panels (now center of the list is preferred)
This improves the experience in a few ways:
- It avoids merging slash command output sections that are adjacent.
- When hitting cmd-z, all the output from a command is undone at once.
- When deleting a pending command, it stops the command and prevents new
output from flowing in.
Release Notes:
- N/A
This PR adds support for streaming output from slash commands
In this PR we are focused primarily on the interface of the
`SlashCommand` trait to support streaming the output. We will follow up
later with support for extensions and context servers to take advantage
of the streaming nature.
Release Notes:
- N/A
---------
Co-authored-by: David Soria Parra <davidsp@anthropic.com>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: David <david@anthropic.com>
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Will <will@zed.dev>
when searching for the appropriate zed window, i scan a list of window
titles. putting the workspace before the filename makes this list a lot
easier to scan.
screenshot of [alt tab](https://alt-tab-macos.netlify.app/) in mac os
demonstrating how putting the workspace first makes it easier to locate
a project.
Release Notes:
- Improved window title by showing workspace name before filename
Closes#17388
Release Notes:
- N/A
We are using gpui to build a project, and we want to render SVGs with
the `<text>` tag. We use `resvg` and `usvg` with the same version as
gpui, like `0.41.0`. However, when we enable the feature `text`, we get
an error from `usvg`.
```shell
error[E0061]: this function takes 3 arguments but 2 arguments were supplied
--> /Users/madcodelife/.cargo/git/checkouts/zed-23e65a6dff445450/e681a4b/crates/gpui/src/svg_renderer.rs:49:20
|
49 | let tree = usvg::Tree::from_data(bytes, &usvg::Options::default())?;
| ^^^^^^^^^^^^^^^^^^^^^---------------------------------- argument #3 of type `&Database` is missing
|
```
This error occurs because when the `text` feature is enabled, the
`form_data` function needs an extra argument, `fontdb`.
[The code is
here](fb7e28513f/crates/usvg/src/parser/mod.rs (L98)).
They changed the API in version
[`0.42.0`](b1d06e9463/crates/usvg/src/parser/mod.rs (L98)).
So, I updated the versions to the latest (0.44.0).
This is our demo:
## Before:
<img width="620" alt="image"
src="https://github.com/user-attachments/assets/7c71f8b1-e5fe-4e60-8f21-bb3bd9924e03">
## After:
<img width="620" alt="image"
src="https://github.com/user-attachments/assets/4b0a0602-928f-4017-b5df-859eeb5f6b4a">
This contains the main changes to the extensions crate from #20049. The
primary goal here is removing dependencies that we can't include on the
remote.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Marshall <marshall@zed.dev>
This PR returns the `/tab` and `/file` commands to their original
behavior of _not_ automatically including diagnostics. This is an
assistant-only change, though, given that we can already pass the
`/diagnostic` command by itself. The inline assistant will still have
the diagnostics baked in to allow prompts such as "Fix this error."
Release Notes:
- Remove automatic diagnostic attachment to tab and file commands in the
assistant panel
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Closes https://github.com/zed-industries/zed/issues/18062
This pull request prevents the `scores` matrix for the streaming diff
from growing quadratically.
Previously, we would store rows and columns respectively for all
characters in the old and new text. However, every time we receive a
chunk, we will always advance the position in the matrix to the very
latest character in the new text. This means we can avoid storing scores
for the new characters that were already reported.
Randomized tests still pass and I also made sure that the diffs we
produce are identical.
Release Notes:
- Improved memory footprint for inline transformations
([#18062](https://github.com/zed-industries/zed/issues/18062))
In #17108, we updated `go test ./...` to run against the package
directory, to fix cases in which the top-level project is not the go
module root. However, this leads to the confusing behavior of `go test
./...` only running tests in subdirectories of the current package.
Here, we change the behavior to instead walk up the dirtree to find the
closest `go.mod`, and run the `./...` tasks relative to that directory.
This might lead to more predictable behavior for these tasks.
Also see:
https://github.com/zed-industries/zed/pull/19987#issuecomment-2450159099
Release Notes:
- Improved go test and generate `./...` commands to run against the
current go module directory rather than the current package directory
Those seem to require a corresponding NSTextView/NSTextField with
explicitly enabled `allowsUndo` property. But Zed does not use any of
these *Text* elements, so there's nothing to allow undo on. Hence, use
the Zed handler, making both actions always enabled instead of being
always disabled.
Closes https://github.com/zed-industries/zed/issues/12335
Release Notes:
- Fixed undo and redo macOS menu items being always disabled
([#12335](https://github.com/zed-industries/zed/issues/12335))
This is a follow-up to #19913 and adds another "index" to the `Chunk`,
this time indexing the location of tabs.
Release Notes:
- N/A
---------
Co-authored-by: Antonio <antonio@zed.dev>
This PR is only updating UI strings and pieces of the documentation—it
doesn't touch the actual code, where it's still using things such as
`NewContext` and similar terminology for variables, actions, etc.
Release Notes:
- N/A
This adds support for [git
worktrees](https://matklad.github.io/2024/07/25/git-worktrees.html). It
fixes the errors that show up (git blame not working) and actually adds
support for detecting git changes in a `.git` folder that's outside of
our path (and not even in the ancestor chain of our root path).
(While working on this we discovered that our `.gitignore` handling is
not 100% correct. For example: we do stop processing `.gitignore` files
once we found a `.git` repository and don't go further up the ancestors,
which is correct, but then we also don't take into account the
`excludesFile` that a user might have configured, see:
https://git-scm.com/docs/gitignore)
Closes https://github.com/zed-industries/zed/issues/19842
Closes https://github.com/zed-industries/zed/issues/4670
Release Notes:
- Added support for git worktrees. Zed can now open git worktrees and
the git status in them is correctly handled.
---------
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Bennet <bennet@zed.dev>
