TL;DR:
- shaves off about 0.5 seconds from most of our debug builds.
- It would've slightly regressed release build due to preventing build pipelining, but as a tradeoff I've bumped up codegen-units for zed.
\# What did you come up with this time Piotr
In our zed repository I've noticed that merely *loading dependencies* in each crate takes non-trivial amount of time (~800ms in case of editor).
That is to say, the moment you \`use editor\`, your build time increases by 800ms - this happens just once in crate though, as it looks like compiler has to load .rlibs of all of the referenced dependencies.
This is visible under rustc's self-profile. Repro steps on twitter: https://twitter.com/PiotrOsiewicz/status/1762845413072101567
\# How does this commit alleviate this?
zed lib + zed bin are on critical path of every build and cumulatively take about 3s to build. This commit bundles all of this up into ~2.2s of bin build time instead.
\# Wait, splitting binary targets is good, no?
Splitting up a binary target into lib + bin is generally considered to be a good practice, as you can then reuse the lib part elsewhere if needed.
It also allows the build to kick off the moment metadata for all of the dependencies is available (thus, you don't need to wait for codegen).
However, we do not really use zed as a lib, so the first benefit is not really a thing for us.
The latter *is* indeed something we lose out on in release mode (in dev codegen phase of leaf-ish crates is insignificant, as we use shared generics - thus we don't spend much time codegening).
That's why I've bumped codegen units for zed crate to 16 in release mode to keep build times in tact.
This PR simplifies the Zed file system abstraction and implements
`Fs::watch` for linux and windows.
TODO:
- [x] Figure out why this fails to initialize the file watchers when we
have to initialize the config directory paths, but succeeds on
subsequent runs.
- [x] Fix macOS dependencies on old fsevents::Event crate
Release Notes:
- N/A
Changes Zed CI to build and upload Linux nightly bundles.
* `todo!(linux)` are replaced with `TODO linux` to make `todo!`-based
workflows more convenient
* renames `run-build-dmg` label into `run-bundling`, also renames a few
GH Actions entries to be more generic
* make another upload path for Linux, which keeps a separate file with SHA to version the nightly artifact.
* adds a `*.deb` package building with a couple of caveats, marked with
new `TODO linux` entries:
1. `cargo-bundle` is not very flexible, so it generates artifacts with
the structure and names that we're unable to alter before/during the
generation.
For that, a set of extra steps is made by repacking the *.deb package —
this is not very portable between different Linux distros, so later one
needs to find a way to combine multiple package types in this script.
2. `cargo-bundle` is not able to properly generate the *.msi bundle
despite declaring it in the features:
https://github.com/burtonageo/cargo-bundle/issues/116
Windows needs to invent its own way of bundling or fix the tool.
3. Both `cli` and `zed` binaries are added into the archive under
`/usr/local/bin/` path with their `-$channel` suffix
(-nightly/-preview/-dev/-stable) and a `/usr/local/bin/zed ->
/usr/local/bin/cli-nightly` symlink is made to make CLI work as Zed
launcher:
```
~/work/zed kb/linux-nightly:origin/kb/linux-nightly* ❯ dpkg -c target/zed_amd64.deb
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/local/
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/local/bin/
-rwxr-xr-x allaptop/allaptop 8746832 2024-03-06 00:53 ./usr/local/bin/cli-nightly
-rwxr-xr-x allaptop/allaptop 689078560 2024-03-06 00:53 ./usr/local/bin/zed-nightly
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/share/
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/share/applications/
-rw-r--r-- allaptop/allaptop 153 2024-03-06 00:53 ./usr/share/applications/zed.desktop
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/share/icons/
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/share/icons/hicolor/
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/share/icons/hicolor/1024x1024@2x/
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/share/icons/hicolor/1024x1024@2x/apps/
-rw-r--r-- allaptop/allaptop 716288 2024-03-06 00:53 ./usr/share/icons/hicolor/1024x1024@2x/apps/zed.png
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/share/icons/hicolor/512x512/
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/share/icons/hicolor/512x512/apps/
-rw-r--r-- allaptop/allaptop 239870 2024-03-06 00:53 ./usr/share/icons/hicolor/512x512/apps/zed.png
lrwxrwxrwx allaptop/allaptop 0 2024-03-06 00:53 ./usr/local/bin/zed -> /usr/local/bin/cli-nightly
```
But the CLI does not work under Linux yet and there's no way to install
that CLI from Zed now; Zed binary itself is not able to open
`file/location:12:34`-like things and set up the env properly, but is
able to start or open a directory.
So, this structure can be considered temporary and changed, if needed.
4. Zed Nightly on Linux does not know how to update itself, so all
nightly publishing is not picked up automatically.
5. Rust cache from `main` builds does not get shared between CI jobs,
due to being run in a different CI job that forms a different CI key, so
```
- name: Cache dependencies
uses: swatinem/rust-cache@v2
with:
save-if: ${{ false }}
```
would not work.
This makes Linux bundling jobs long.
Release Notes:
- N/A
This PR moves the Clippy configuration up to the workspace level.
We're using the [`lints`
table](https://doc.rust-lang.org/cargo/reference/workspaces.html#the-lints-table)
to configure the Clippy ruleset in the workspace's `Cargo.toml`.
Each crate in the workspace now has the following in their own
`Cargo.toml` to inherit the lints from the workspace:
```toml
[lints]
workspace = true
```
This allows for configuring rust-analyzer to show Clippy lints in the
editor by using the following configuration in your Zed `settings.json`:
```json
{
"lsp": {
"rust-analyzer": {
"initialization_options": {
"check": {
"command": "clippy"
}
}
}
}
```
Release Notes:
- N/A
Also adds a new command `cli: Register Zed Scheme` that will cause URLs
to be opened in the current zed version, and we call this implicitly if
you install the CLI
Also add some status reporting to install cli
Fixes: #8857
Release Notes:
- Added success/error reporting to `cli: Install Cli`
([#8857](https://github.com/zed-industries/zed/issues/8857)).
- Removed `zed-{preview,nightly,dev}:` url schemes (used by channel
links)
- Added `cli: Register Zed Scheme` to control which zed handles the
`zed://` scheme (defaults to the most recently installed, or
the version that you last used `cli: Install Cli` with)
- Moves languages module from `zed` into a separate crate. That way we
have less of a long pole at the end of compilation.
- Removes moot dependencies on editor/picker. This is totally harmless
and might help in the future if we decide to decouple picker from
editor.
Before:
```
Number of crates that depend on 'picker' but not on 'editor': 1
Total number of crates that depend on 'picker': 13
Total number of crates that depend on 'editor': 30
```
After:
```
Number of crates that depend on 'picker' but not on 'editor': 5
Total number of crates that depend on 'picker': 12
Total number of crates that depend on 'editor': 26
```
The more crates depend on just picker but not editor, the better in that
case.
Release Notes:
- N/A
This PR adds a `SystemClock` trait for abstracting away the system
clock.
This allows us to swap out the real system clock with a
`FakeSystemClock` in the tests, thus allowing the fake passage of time.
We're using this in `Telemetry` to better mock the clock for testing
purposes.
Release Notes:
- N/A
[Profiling](https://crates.io/crates/profiling) crate allows easy
integration with various profiler tools. The best thing is - annotations
compile to nothing unless you request a specific feature.
For example, I used this command to enable Tracy support:
```bash
cargo run --features profiling/profile-with-tracy
```
At the same time I had Tracy tool open and waiting for connection. It
gathered nice stats from the run:
Release Notes:
- N/A
This is a compilation of fixes for errors that appeared in dependent
crates in Windows.
- wezterm (zed-industries/wezterm#1)
- tree-sitter-svelte (Himujjal/tree-sitter-svelte#54)
- tree-sitter-uiua (shnarazk/tree-sitter-uiua#25)
- tree-sitter-haskell (I sent a PR, but upstream source is regenerated
and no longer errors.)
Release Notes:
- N/A
Part of #7108
This PR includes just the static runnables part. We went with **not**
having a dedicated panel for runnables.
This is just a 1st PR out of N, as we want to start exploring the
dynamic runnables front. Still, all that work is going to happen once
this gets merged.
Release Notes:
- Added initial, static Runnables support to Zed. Such runnables are defined in
`runnables.json` file (accessible via `zed: open runnables` action) and
they can be spawned with `runnables: spawn` action.
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Pitor <pitor@zed.dev>
Co-authored-by: Beniamin <beniamin@zagan.be>
This PR adds a view for installing extensions within Zed.
My subtasks:
- [X] Page Extensions and assign in App Menu
- [X] List extensions
- [X] Button to Install/Uninstall
- [x] Search Input to search in extensions registry API
- [x] Get Extensions from API
- [x] Action install to download extension and copy in /extensions
folder
- [x] Action uninstall to remove from /extensions folder
- [x] Filtering
- [x] Better UI Design
Open to collab!
Release Notes:
- Added an extension installation view. Open it using the `zed:
extensions` action in the command palette
([#7096](https://github.com/zed-industries/zed/issues/7096)).
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Carlos <foxkdev@gmail.com>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Max <max@zed.dev>
Current limitations:
* Not able to navigate into JAR files
Release Notes:
- Added Clojure language support
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
This PR adds the initial support for loading extensions in Zed.
### Extensions Directory
Extensions are loaded from the extensions directory.
The extensions directory has the following structure:
```
extensions/
installed/
extension-a/
grammars/
languages/
extension-b/
themes/
manifest.json
```
The `manifest.json` file is used internally by Zed to keep track of
which extensions are installed. This file should be maintained
automatically, and shouldn't require any direct interaction with it.
Extensions can provide Tree-sitter grammars, languages, and themes.
Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
Terraform and HCL are almost the same language, but not quite so
proposing them as separate languages within Zed. (Terraform is an
extension of HCL, with a different formatter.)
This is just adding the language definition, parsing and highlighting
functionality, not any LSP or formatting beyond that for either
language.
I've taken a bunch of inspiration from Neovim for having the separate
languages, and also lifted some of their `scm` files (with attribution
comments in this codebase) as the tree-sitter repo doesn't contain them.
(Neovim's code is Apache-2.0 licensed, so should be fine here with
attribution from reading Zed's licenses files.) I've then amended to
make sure the capture groups are named for things Zed understands. I'd
love someone from Zed to confirm that's okay, or if I should clean-room
implement the `scm` files.
Highlighting in Terraform & HCL with a moderate amount of syntax in a
file (Terraform on left, HCL on right.)
<img width="1392" alt="Screenshot 2024-01-31 at 18 07 45"
src="https://github.com/zed-industries/zed/assets/696/1d3c9a08-588e-4b8f-ad92-98ce1e419659">
Release Notes:
- (|Improved) ...
([#5098](https://github.com/zed-industries/zed/issues/5098)).
Adds a "markdown: open preview" action to open a markdown preview.
https://github.com/zed-industries/zed/assets/18583882/6fd7f009-53f7-4f98-84ea-7dd3f0dd11bf
This PR extends the work done in `crates/rich_text` to render markdown
to also support:
- Variable heading sizes
- Markdown tables
- Code blocks
- Block quotes
## Release Notes
- Added `Markdown: Open preview` action to partially close
([#6789](https://github.com/zed-industries/zed/issues/6789)).
## Known issues that will not be included in this PR
- Images.
- Nested block quotes.
- Footnote Reference.
- Headers highlighting.
- Inline code highlighting (this will need to be implemented in
`rich_text`)
- Checkboxes (`- [ ]` and `- [x]`)
- Syntax highlighting in code blocks.
- Markdown table text alignment.
- Inner markdown URL clicks
From https://github.com/microsoft/mimalloc:
> In our benchmarks (see
[below](https://github.com/microsoft/mimalloc#performance)), mimalloc
outperforms other leading allocators (jemalloc, tcmalloc, Hoard, etc),
and often uses less memory. A nice property is that it does consistently
well over a wide range of benchmarks. There is also good huge OS page
support for larger server programs.
Release Notes:
- Changed default allocator to mimalloc.
This PR sorts the dependency lists in our `Cargo.toml` files so that
they are in alphabetical order.
This should make them easier to visually scan when looking for a
dependency.
Apologies in advance for any merge conflicts 🙈
Release Notes:
- N/A
This PR adds the ability to copy the permalink to a line from within
Zed.
This functionality is available through the `editor: copy permalink to
line` action in the command palette:
<img width="589" alt="Screenshot 2024-01-30 at 7 07 46 PM"
src="https://github.com/zed-industries/zed/assets/1486634/332282cb-211f-4f16-9eb1-415bcfee9b7b">
Executing this action will create a permalink to the currently selected
line(s) and copy it to the clipboard.
Here is an example line:
```
56c80e8011/src/lib.rs (L25)
```
Currently, both GitHub and GitLab are supported.
### Notes and known limitations
- In order to determine where to permalink to, we read the URL of the
`origin` remote in Git. This feature will not work if the `origin`
remote is not present.
- Attempting to permalink to a ref that is not pushed to the origin will
result in the link 404ing.
- Attempting to permalink when Git is in a dirty state may not generate
the right link.
- For instance, modifying a file (e.g., adding new lines) and grabbing a
permalink to it will result in incorrect line numbers.
Release Notes:
- Added the ability to copy a permalink to a line
([#6777](https://github.com/zed-industries/zed/issues/6777)).
- Available via the `editor: copy permalink to line` action in the
command palette.
This should prevent a class of bugs where one queries the wrong type of
global, which results in oddities at runtime.
Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
