This PR makes it so we normalize the line endings for prompts to LFs
(`\n`) when we load a prompt from the library.
In some cases, prompts could end up with CRLF (`\r\n`) line endings.
When these prompts were used with the `/prompt` slash command and
summarily run, the prompt text would be converted into a rope, causing
the line endings to be normalized to LFs.
However, this would happen _after_ the ranges for the
`SlashCommandOutputSection`s were computed based on the text that still
contained the CRLFs. This would then cause these ranges to be invalid
for the text with the normalized endings, resulting in a panic when
converting them to anchors.
Fixes https://github.com/zed-industries/zed/issues/15652.
Release Notes:
- N/A
Co-authored-by: Max <max@zed.dev>
This PR removes some `unwrap`s while loading the built-in step
resolution prompt.
While these `unwrap`s are safe today, they are relying on some implicit
contracts that might change in the future. We're using this in a context
where it's easy to propagate an error upwards, so we may as well avoid
the `unwrap`s entirely and use a `Result`.
Release Notes:
- N/A
TODOs for follow-up:
- [ ] When opening panel: nudge user to sign in if they're not signed-in
and have no provider configured (or if they're not signed-in and have
Zed AI configured)
- [ ] Configuration page is not scrollable
- [ ] Design tweaks
Current status:
https://github.com/user-attachments/assets/d26d65ea-43e8-481b-81a3-b3cba01704a8
Release Notes:
- N/A
This is an intermediate fix for the focus problems in the assistant
panel. Intermediate because I'm going to shred the whole
ConfigurationView now and replace the tabs inside with a list.
Release Notes:
- N/A
This PR updates the `LanguageModel` trait with a new method for denoting
the availability of a model.
Right now we have two variants:
- `Public` for models that have no additional restrictions (other than
their respective setup/authentication requirements)
- `RequiresPlan` for models that require a specific Zed plan
Release Notes:
- N/A
This PR fixes an issue where slash commands were not able to run when
Zed did not have any worktrees opened.
This requirement was only necessary for slash commands originating from
extensions, and we can enforce the presence of a worktree just for
those:
<img width="378" alt="Screenshot 2024-08-01 at 5 01 58 PM"
src="https://github.com/user-attachments/assets/38bea947-e33b-4c64-853c-c1f36c63d779">
Release Notes:
- N/A
After the changes in #15536, block decorations need to be given an
explicit height if their content doesn't consume height on its own. We
missed that inline transformation deletion decorations didn't do this,
creating weird results. This fixes the issue and prevents block
decorations from ever having a zero height. That helps avoid major
weirdness, but this still a bit of a gotcha.
We need to back port this to Preview Channel (0.147.x)
Release Notes:
- N/A
---------
Co-authored-by: Antonio <antonio@zed.dev>
This PR fixes an issue where creating a new context as a guest would
insert multiple default prompts: one for the host and one for the guest.
When creating a new context as a guest while collaborating, we should
only use the host's default prompt.
Release Notes:
- N/A
This adds a button to the `Configuration` page for providers so it's
easy to start a new context _with the given provider_ selected.
Obviously not the most beautiful form this button can have, but works!
cc @iamnbutler
Release Notes:
- N/A
Co-authored-by: Bennet <bennet@zed.dev>
Small bug that snuck in with #15490. When closing the configuration tab
explicitly and then activating the assistant tab again, it wouldn't show
the configuration page.
Release Notes:
- N/A
Co-authored-by: Bennet <bennet@zed.dev>
Built-in prompts can still be removed from the default prompt, but they
can't be edited and are automatically updated with new Zed releases.
Release Notes:
- N/A
---------
Co-authored-by: Antonio <antonio@zed.dev>
- [x] bug: setting a key doesn't update anything
- [x] show high-level text on configuration page to explain what it is
- [x] show "everything okay!" status when credentials are set
- [x] maybe: add "verify" button to check credentials
- [x] open configuration page when opening panel for first time and
nothing is configured
- [x] BUG: need to fix empty assistant panel if provider is `zed.dev`
but not logged in
Co-Authored-By: Thorsten <thorsten@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Thorsten <thorsten@zed.dev>
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
This commit gives tab button renderers control over the condition in
which they should be displayed. Previously we displayed tab buttons only
when the pane was focused. Now tab renderers can return an Option of
AnyElement, which in turn makes it possible for them to control when and
how they're rendered. Pane and Terminal handlers still check for self
focus condition and Assistant Panel does not.
Release Notes:
- N/A
This UI change is behind a `ZedPro` feature flag so that it won't be
visible until we're ready to launch that service.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Marshall <marshall@zed.dev>
This PR renames and added a new pane event to indicate the difference
between `removing` and `removed` event. This change is needed for the
debugger implementation, if you close a pane we have to send a
`terminateThread` request to the adapter because it's not supported to
reopen a pane. So when the pane is removing we have to know what thread
it is what is stored on the panel itself, so we have to be able to get
this information before the pane is actually removed.
So my idea how to fix this was by adding a new event called
`RemovedItem` which is a rename of `RemoveItem` which also makes a bit
more sense because the item is removed at that point. And seeing the
name `RemoveItem` does not really say that it's removed, more like we
are removing the item.
/cc @mikayla-maki
Release Notes:
- N/A
There was/is some race condition that gets triggered only with the
zed.dev provider when opening the provider that would cause a
double-borrow on workspace.
This PR fixes the issue by cloning the workspace weakly. Turns out we
can go very far with just the weak reference.
We're still a bit unsure why exactly the race condition happened, since
it's hard to reproduce, but we're working on configuration
view/management in #15490 anyway.
Release Notes:
- N/A
Co-authored-by: Bennet <bennet@zed.dev>
This is the revised version of #15527.
We also added new events to notify subscribers when new providers are
added or removed.
Co-Authored-by: Thorsten <thorsten@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Thorsten <thorsten@zed.dev>
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
Something seems to have broke on `main` in last few days.
Bug was reproducible like this:
- Open assistant panel
- Choose provider that wasn't authenticated
- See auth prompt
- Close the tab (!) in the assistant panel
- Reactivate the assistant panel
- Bug: panel is blank!
This fixes the bug by consolidating the behavior of checking credentials
and showing auth prompt.
Release Notes:
- N/A
With zed.dev provider becoming more popular, it helps alleviate
confusion when showing not only the model name but also the provider
name.
Release Notes:
- N/A
We also eliminate the `completion` crate and moved its logic into
`LanguageModelRegistry`.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
Previously, the following lead to a bug:
1. Set OpenAI key
2. Switch to Anthropic
3. Restart Zed
4. Switch provider to OpenAI -> get prompted for authentication prompt
With this change, you won't get prompted for the OpenAI key again.
Release Notes:
- N/A
Co-authored-by: Bennet <bennet@zed.dev>
Additionally, I've generalized the implementation of tab switcher so
that - instead of explicitly listing panels it supports (at the time of
writing it was just the terminal panel and nothing else), it now relies
on Panel::pane trait method. As long as that's implemented, you get a
tab switcher support for free.
Release Notes:
- Added support for tab switcher in Assistant panel.
This adds the optional `PRESERVED_KEYS` constant to the `Settings`
trait,
which allows users of the trait to specify which keys should be written
to
the settings file, even if their current value matches the default
value.
That's useful for tagged settings that have, for example, a `"version"`
field
that should always be present in the user settings file, so we can then
reparse
the user settings based on the version.
Co-Authored-By: Thorsten <thorsten@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Thorsten <thorsten@zed.dev>
# Summary
This commit implements Github Copilot Chat support within the existing
Assistant panel/framework. It required a little bit of trickery and
internal API modification, as Copilot doesn't use the same
authentication-style as all of the existing providers, opting to use
OAuth and a short lived API key instead of a straight API key. All
existing Assistant features should work.
Release Notes:
- Added Github Copilot Chat support
([#4673](https://github.com/zed-industries/zed/issues/4673)).
## Screenshots
<img width="1552" alt="A screenshot showing a conversation between a
user and Github Copilot Chat within the Zed editor."
src="https://github.com/user-attachments/assets/73eaf6a2-792b-4c40-a7fe-f763bd6417d7">
---------
Co-authored-by: Bennet Bo Fenner <bennet@zed.dev>
This PR removes the feature flag for the terminal inline assistant,
making it available to everyone.
Release Notes:
- Use Ctrl+Enter to summon the inline assistant in the terminal, which
let's you generate terminal commands based on your description
([demo](https://twitter.com/thorstenball/status/1814241447383605329))
In this pull request, we change the zed.dev protocol so that we pass the
raw JSON for the specified provider directly to our server. This avoids
the need to define a protobuf message that's a superset of all these
formats.
@bennetbo: We also changed the settings for available_models under
zed.dev to be a flat format, because the nesting seemed too confusing.
Can you help us upgrade the local provider configuration to be
consistent with this? We do whatever we need to do when parsing the
settings to make this simple for users, even if it's a bit more complex
on our end. We want to use versioning to avoid breaking existing users,
but need to keep making progress.
```json
"zed.dev": {
"available_models": [
{
"provider": "anthropic",
"name": "some-newly-released-model-we-havent-added",
"max_tokens": 200000
}
]
}
```
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
