Before this change we didn't explicitly handle vim's exclusive-linewise
edgecase
(https://neovim.io/doc/user/motion.html#exclusive).
Instead we had hard-coded workarounds in a few places to make our tests
pass.
The most pernicious of these workarounds was that we represented a
visual line
selection as including the trailing newline (or leading newline for
files that
end with no newline), which other code had to undo to get back to what
the user
indended.
Closes#21440
Updates #6900
Release Notes:
- vim: Fixed `d]}` to not delete the closing brace
- vim: Fixed `d}` from the start of the line to not delete the paragraph
separator
- vim: Fixed `d}` from the middle of the line to not delete the final
newline
## Summary
This PR starts the process of adding debug task locators to Zed's
debugger system. A task locator is a secondary resolution phase that
allows a debug task to run a command before starting a debug session and
then uses the output of the run command to configure itself.
Locators are most applicable when debugging a compiled language but will
be helpful for any language as well.
## Architecture
At a high level, this works by adding a debug task queue to `Workspace`.
Which add's a debug configuration associated with a `TaskId` whenever a
resolved task with a debug config is added to `TaskInventory`'s queue.
Then, when the `SpawnInTerminal` task finishes running, it emits its
task_id and the result of the ran task.
When a ran task exits successfully, `Workspace` tells `Project` to start
a debug session using its stored debug config, then `DapStore` queries
the `LocatorStore` to configure the debug configuration if it has a
valid locator argument.
Release Notes:
- N/A
Closes#26884
Release Notes:
- vim: Added `:marks` which brings up list of current marks
- confirming on selected mark in the view jumps to that mark
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This is the core change:
https://github.com/zed-industries/zed/pull/26758/files#diff-044302c0d57147af17e68a0009fee3e8dcdfb4f32c27a915e70cfa80e987f765R1052
TODO:
- [x] Use AsyncFn instead of Fn() -> Future in GPUI spawn methods
- [x] Implement it in the whole app
- [x] Implement it in the debugger
- [x] Glance at the RPC crate, and see if those box future methods can
be switched over. Answer: It can't directly, as you can't make an
AsyncFn* into a trait object. There's ways around that, but they're all
more complex than just keeping the code as is.
- [ ] Fix platform specific code
Release Notes:
- N/A
### DISCLAIMER
> As of 6th March 2025, debugger is still in development. We plan to
merge it behind a staff-only feature flag for staff use only, followed
by non-public release and then finally a public one (akin to how Git
panel release was handled). This is done to ensure the best experience
when it gets released.
### END OF DISCLAIMER
**The current state of the debugger implementation:**
https://github.com/user-attachments/assets/c4deff07-80dd-4dc6-ad2e-0c252a478fe9https://github.com/user-attachments/assets/e1ed2345-b750-4bb6-9c97-50961b76904f
----
All the todo's are in the following channel, so it's easier to work on
this together:
https://zed.dev/channel/zed-debugger-11370
If you are on Linux, you can use the following command to join the
channel:
```cli
zed https://zed.dev/channel/zed-debugger-11370
```
## Current Features
- Collab
- Breakpoints
- Sync when you (re)join a project
- Sync when you add/remove a breakpoint
- Sync active debug line
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Restart stack frame (if adapter supports this)
- Variables
- Loaded sources
- Modules
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Debug console
- Breakpoints
- Log breakpoints
- line breakpoints
- Persistent between zed sessions (configurable)
- Multi buffer support
- Toggle disable/enable all breakpoints
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Show collapsed stack frames
- Restart stack frame (if adapter supports this)
- Loaded sources
- View all used loaded sources if supported by adapter.
- Modules
- View all used modules (if adapter supports this)
- Variables
- Copy value
- Copy name
- Copy memory reference
- Set value (if adapter supports this)
- keyboard navigation
- Debug Console
- See logs
- View output that was sent from debug adapter
- Output grouping
- Evaluate code
- Updates the variable list
- Auto completion
- If not supported by adapter, we will show auto-completion for existing
variables
- Debug Terminal
- Run custom commands and change env values right inside your Zed
terminal
- Attach to process (if adapter supports this)
- Process picker
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Disconnect
- Restart
- Stop
- Warning when a debug session exited without hitting any breakpoint
- Debug view to see Adapter/RPC log messages
- Testing
- Fake debug adapter
- Fake requests & events
---
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
Co-authored-by: Piotr <piotr@zed.dev>
Closes https://github.com/zed-industries/zed/issues/13111
Release Notes:
- vim: Added global marks `'[A-Z]`
- vim: Added persistence for global (and local) marks. When re-opening
the same workspace your previous marks will be available.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
These changes tackle two issues with running terminal commands via vim
mode:
- When using `!!` the tab's title was set to `!!` instead of the
previous command that was run and these changes fix that in order to
always display the previous command in the tab's title when re-running
the command with `!!`
- For a terminal command, pressing the rerun button would actually bring
up the task palette, so this has been updated in order to disable the
rerun button when the terminal tab was spawned via a vim command
Closes#25800
Release Notes:
- Fixed the terminal tab title when using `!!` to rerun the last command
- Improved the terminal tab for when command is run via vim mode, in
order to disable the rerun button, seeing as Zed does not support it
Closes#18157
Release Notes:
- vim: Added `:reg[isters]` to show the current values of registers
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#10167
This is take 2 on https://github.com/zed-industries/zed/pull/2341 which
was closed due to lack of migrator.
This PR contains rename of following keymap actions:
```sh
1. ["editor::GoToPrevHunk", { "center_cursor": true }] -> ["editor::GoToPreviousHunk", { "center_cursor": true }]
2. "editor::GoToPrevDiagnostic" -> "editor::GoToPreviousDiagnostic"
3. "editor::ContextMenuPrev" -> "editor::ContextMenuPrevious"
4. "search::SelectPrevMatch" -> "search::SelectPreviousMatch"
5. "file_finder::SelectPrev" -> "file_finder::SelectPrevious"
6. "menu::SelectPrev" -> "menu::SelectPrevious"
7. "editor::TabPrev" -> "editor::Backtab"
```
Release Notes:
- Renamed several keymap actions for consistency (e.g., `GoToPrevHunk` →
`GoToPreviousHunk`, `TabPrev` → `Backtab`). Your existing configured
keybindings will still work. You can click **"Backup and Update"** at
the top of your keymap file to easily update to the new actions.
Co-authored-by: Joseph T. Lyons <JosephTLyons@gmail.com>
Closes #ISSUE
Release Notes:
- Rename `editor::RevertSelectedHunks` and `editor::RevertFile` to
`git::Restore` and `git::RestoreFile` for consistency with git
Done automatically with
> ast-grep -p '$A.background_executor().spawn($B)' -r
'$A.background_spawn($B)' --update-all --globs "\!crates/gpui"
Followed by:
* `cargo fmt`
* Unexpected need to remove some trailing whitespace.
* Manually adding imports of `gpui::{AppContext as _}` which provides
`background_spawn`
* Added `AppContext as _` to existing use of `AppContext`
Release Notes:
- N/A
Supercedes #24561Closes#21059
Before this change we would skip saving multibuffers regardless of the
save intent. Now we correctly save them.
Along the way:
* Prompt to save when closing the last singleton copy of an item (even
if it's still open in a multibuffer).
* Update our file name prompt to pull out dirty project items from
multibuffers instead of counting multibuffers as untitled files.
* Fix our prompt test helpers to require passing the button name instead
of the index. A few tests were passing invalid responses to save
prompts.
* Refactor the code a bit to hopefully clarify it for the next bug.
Release Notes:
- Fixed edge-cases when closing multiple items including multibuffers.
Previously no prompt was generated when closing an item that was open in
a multibuffer, now you will be prompted.
- vim: Fix :wq in a multibuffer
Closes#21147
Release Notes:
- vim: First version of `:set` with support for `[no]wrap`,
`[no]number`, `[no]relativenumber`
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#22247
- [x] Do not close pinned tab on keyboard shortcuts like `ctrl+w` or
`alt+f4`
- [x] Close pinned tab on context menu action, menu bar action, or vim
bang
- [x] While closing pinned tab via shortcut (where it won't close),
instead activate any other non-pinned tab in same pane
- [x] Else, if any other pane contains non-pinned tab, activate that
- [x] Tests
Co-authored-by: uncenter <47499684+uncenter@users.noreply.github.com>
Release Notes:
- Pinned tab now stay open when using close shortcuts, auto focuses to
any other non-pinned tab instead.
Appears this test was failing, and someone edited the expected test
output instead of fixing it. Well no longer!
Release Notes:
- N/A
Co-authored-by: Conrad <conrad@zed.dev>
There's still a bit more work to do on this, but this PR is compiling
(with warnings) after eliminating the key types. When the tasks below
are complete, this will be the new narrative for GPUI:
- `Entity<T>` - This replaces `View<T>`/`Model<T>`. It represents a unit
of state, and if `T` implements `Render`, then `Entity<T>` implements
`Element`.
- `&mut App` This replaces `AppContext` and represents the app.
- `&mut Context<T>` This replaces `ModelContext` and derefs to `App`. It
is provided by the framework when updating an entity.
- `&mut Window` Broken out of `&mut WindowContext` which no longer
exists. Every method that once took `&mut WindowContext` now takes `&mut
Window, &mut App` and every method that took `&mut ViewContext<T>` now
takes `&mut Window, &mut Context<T>`
Not pictured here are the two other failed attempts. It's been quite a
month!
Tasks:
- [x] Remove `View`, `ViewContext`, `WindowContext` and thread through
`Window`
- [x] [@cole-miller @mikayla-maki] Redraw window when entities change
- [x] [@cole-miller @mikayla-maki] Get examples and Zed running
- [x] [@cole-miller @mikayla-maki] Fix Zed rendering
- [x] [@mikayla-maki] Fix todo! macros and comments
- [x] Fix a bug where the editor would not be redrawn because of view
caching
- [x] remove publicness window.notify() and replace with
`AppContext::notify`
- [x] remove `observe_new_window_models`, replace with
`observe_new_models` with an optional window
- [x] Fix a bug where the project panel would not be redrawn because of
the wrong refresh() call being used
- [x] Fix the tests
- [x] Fix warnings by eliminating `Window` params or using `_`
- [x] Fix conflicts
- [x] Simplify generic code where possible
- [x] Rename types
- [ ] Update docs
### issues post merge
- [x] Issues switching between normal and insert mode
- [x] Assistant re-rendering failure
- [x] Vim test failures
- [x] Mac build issue
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Joseph <joseph@zed.dev>
Co-authored-by: max <max@zed.dev>
Co-authored-by: Michael Sloan <michael@zed.dev>
Co-authored-by: Mikayla Maki <mikaylamaki@Mikaylas-MacBook-Pro.local>
Co-authored-by: Mikayla <mikayla.c.maki@gmail.com>
Co-authored-by: joão <joao@zed.dev>
Closes#12553
* [x] Fix `diff_hunk_before`
* [x] Fix failure to show deleted text when expanding hunk w/ cursor on
second line of the hunk
* [x] Failure to expand diff hunk below the cursor.
* [x] Delete the whole file, and expand the diff. Backspace over the
deleted hunk, panic!
* [x] Go-to-line now counts the diff hunks, but it should not
* [x] backspace at the beginning of a deleted hunk deletes too much text
* [x] Indent guides are rendered incorrectly
* [ ] Fix randomized multi buffer tests
Maybe:
* [ ] Buffer search should include deleted text (in vim mode it turns
out I use `/x` all the time to jump to the next x I can see).
* [ ] vim: should refuse to switch into insert mode if selection is
fully within a diff.
* [ ] vim `o` command when cursor is on last line of deleted hunk.
* [ ] vim `shift-o` on first line of deleted hunk moves cursor but
doesn't insert line
* [x] `enter` at end of diff hunk inserts a new line but doesn't move
cursor
* [x] (`shift-enter` at start of diff hunk does nothing)
* [ ] Inserting a line just before an expanded hunk collapses it
Release Notes:
- Improved diff rendering, allowing you to navigate with your cursor
inside of deleted text in diff hunks.
---------
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Cole <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Michael <michael@zed.dev>
Co-authored-by: Agus <agus@zed.dev>
Co-authored-by: João <joao@zed.dev>
Closes#22885Closes#12565
This doesn't yet add history in the command palette, which is painfully
missing.
Release Notes:
- vim: Added `:!`, `:<range>!` and `:r!` support
- vim: Added `!` operator in normal/visual mode
Also:
* Adds `impl_internal_actions!` for deriving the `Action` trait without
registering.
* Removes some deserializers that immediately fail in favor of
`#[serde(skip)]` on fields where they were used. This also omits them
from the schema.
Release Notes:
- Keymap settings file now has more JSON schema information to inform
`json-language-server` completions and info, particularly for actions
that take input.
Closes #ISSUE
Still TODO to make this feature good is better command history
Release Notes:
- vim: Add support for `:g/<pattern>/<cmd>` and `:v/<pattern>/<cmd>`
Closes#19054
Rename `max_buffer_row()` to `widest_line_number()` to (hopefully)
prevent
people assuming it means the same as `max_point().row`.
Release Notes:
- Fixed a panic when folding in a multibuffer
Closes#8628
Release Notes:
- Added support for resizing the current pane using vim keybinds with
the intention to follow the functionality of vim
- "ctrl-w +" to make a pane taller
- "ctrl-w -" to make the pane shorter
- "ctrl-w >" to make a pane wider
- "ctrl-w <" to make the pane narrower
- Changed vim pre_count and post_count to globals to allow for other
crates to use the vim count. In this case, it allows for resizing by
more than one unit. For example, "10 ctrl-w -" will decrease the height
of the pane 10 times more than "ctrl-w -"
- This pr does **not** add keybinds for making all panes in an axis
equal size and does **not** add support for resizing docks. This is
mentioned because these could be implied by the original issue
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Demo:
https://github.com/user-attachments/assets/6acb6c1e-bb15-4205-9dcb-2aa4bb99dcf9
Release Notes:
- When using `OpenFile` (`gf` in Vim mode) and the word under the cursor
is not an existing file path, we now fall back and additionally check
whether a file called
`<word-under-cursor>.<language-specific-path-suffixes>` exists. That's
similar to Vim's `suffixesadd` option.
---------
Co-authored-by: Abdelhakim Qbaich <abdelhakim@qbaich.com>
Co-authored-by: Pete LeVasseur <plevasseur@gmail.com>
Release Notes:
- vim: Added `:diff` and `:revert` (that work with `'<,'>`) to open the
selected diff and revert it.
- vim: Added `d o` to open the diff and `d p` to revert (spiritually
similar to vim's do/dp, though obviously not the same)
- vim: Added `ctrl-p` and `ctrl-n` to summon the autocomplete menu in
insert mode.
Closes#16977
Release Notes:
- added current line as default sed range to match vim's behavior
- changed tests accordingly
This also simplifies `ReplaceCommand` implementation by changing
`Option<CommandRange>` to `CommandRange` .
This adds an option to set the split direction for both the horizontal
splits, and the vertical splits.
A couple of things to look for when reviewing:
* The `derive` keywords on the Enums were copy pasted, no clue what they
should be
* Tried adding tests for this, but got stuck.
Co-authored with @Tobbe
Fixes: https://github.com/zed-industries/zed/issues/11342
Release Notes:
- vim: Added `gf` command to open files under the cursor.
- Filenames can now be `cmd`/`ctrl`-clicked, which opens them.
TODOs:
- [x] `main_test.go` <-- works
- [x] `./my-pkg/my_pkg.go` <-- works
- [x] `../go.mod` <-- works
- [x] `my-pkg/my_pkg.go` <-- works
- [x] `my-pkg/subpkg/subpkg_test.go` <-- works
- [x] `file\ with\ space\ in\ it.txt` <-- works
- [x] `"file\ with\ space\ in\ it.txt"` <-- works
- [x] `"main_test.go"` <-- works
- [x] `/Users/thorstenball/.vimrc` <-- works, but only locally
- [x] `~/.vimrc` <--works, but only locally
- [x] Get it working over collab
- [x] Get hover links working
Demo:
https://github.com/user-attachments/assets/26af7f3b-c392-4aaf-849a-95d6c3b00067
Collab demo:
https://github.com/user-attachments/assets/272598bd-0e82-4556-8f9c-ba53d3a95682
Closes#13579
A major painpoint in the Vim crate has been life-cycle management. We
used to have one global Vim instance that tried to track per-editor
state; this led to a number of subtle issues (e.g. #13579, the mode
indicator being global, and quick toggling between windows letting vim
mode's notion of the active editor get out of sync).
This PR changes the internal structure of the code so that there is now
one `Vim` instance per `Editor` (stored as an `Addon`); and the global
stuff is separated out. This fixes the above problems, and tidies up a
bunch of the mess in the codebase.
Release Notes:
* vim: Fixed accidental visual mode in project search and go to
references
([#13579](https://github.com/zed-industries/zed/issues/13579)).
This cleans up the neovim-backed vim tests:
- removed exempted tests (we'll rely on bug reports to find missing edge
cases)
- moved all assertions into non-async fn's so that failures are
reporting on the right file/line
- removed the NeovimBackedBindingTestContext
- renamed a few things to make them clearer
- reduced the number of permutations tested in some cases to reduce
slowest test from 60s to 5s
Release Notes:
- N/A
Release Notes:
- Added support for line ranges in vim replace commands #9428
- not supporting anything other than bare line numbers right now
- ~need to figure out how to show range in question in search bar~
@ConradIrwin implemented showing a highlight of the selected range for a
short direction instead
- ~tests lol~
