Fixes a bug where Vim bindings would flash in the mouse context menu and
then be replaced by the default keybindings. Also fixes those bindings
not being usable while the mouse context menu was open.
Release Notes:
- Fixed bug where Vim bindings were not available when mouse context
menu was open
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Release Notes:
- vim: Added support for the changelist. `g;` and `g,` to the
previous/next change
- vim: Added support for the `'.` mark
- vim: Added support for `gi` to resume the previous insert
Release Notes:
- vim: Added support for buffer-local marks (`'a-'z`) and some builtin
marks `'<`,`'>`,`'[`,`']`, `'{`, `'}` and `^`. Global marks (`'A-'Z`),
and other builtin marks (`'0-'9`, `'(`, `')`, `''`, `'.`, `'"`) are not
yet implemented. (#5122)
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
For #11084 In the case of an indentation in front of the current line,
it may also be necessary to deal with the start point of the selected
range
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Release Notes:
- Added the current operator stack to the Vim status bar at the bottom
of the editor. #4447
This commit introduces a new feature that displays the current partial
command in the vim mode, similar to the behavior in Vim plugin. This
helps users keep track of the commands they're entering.
This PR adds the ability for extensions to provide certain language
settings via the language `config.toml`.
These settings are then merged in with the rest of the settings when the
language is loaded from the extension.
The language settings that are available are:
- `tab_size`
- `hard_tabs`
- `soft_wrap`
Additionally, for bundled languages we moved these settings out of the
`settings/default.json` and into their respective `config.toml`s .
For languages currently provided by extensions, we are leaving the
values in the `settings/default.json` temporarily until all released
versions of Zed are able to load these settings from the extension.
---
Along the way we ended up refactoring the `Settings::load` method
slightly, introducing a new `SettingsSources` struct to better convey
where the settings are being loaded from.
This makes it easier to load settings from specific locations/sets of
locations in an explicit way.
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Release Notes:
- Fixed `cgn` backwards movement problem in #9982
There are two issues:
- When there are no more matches, the next repetition still moves the
cursor to the left. After that, the recording is cleared. For this I
simply move the cursor to the right, but it doesn't work when the cursor
is at the end of the line.
- If `cgn` is used when there are no matches, it cleans the previous
recorded actions. Maybe there should be a way to revert the recording.
This also happens when using `c` and `esc`
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
For #4965
There are still some minor issues:
1. When change the surround and delete the surround, we should also
decide whether there are spaces inside after deleting/replacing
according to whether it is open parentheses, and replace them
accordingly, but at present, delete and change, haven't done this
adaptation for current pr, I'm not sure if I can fit it in the back or
if it needs to be fitted together.
2. In the selection mode, pressing s plus brackets should also trigger
the Add Surrounds function, but this MR has not adapted the selection
mode for the time being, I think we need to support different add
behaviors for the three selection modes.(Currently in select mode, s is
used for Substitute)
3. For the current change surrounds, if the user does not find the
bracket that needs to be matched after entering cs, but it is a valid
bracket, and will wait for the second input before failing, the better
practice here should be to return to normal mode if the first bracket is
not found
4. I reused BracketPair in language, but two of its properties weren't
used in this mr, so I'm not sure if I should create a new struct with
only start and end, which would have less code
I'm not sure which ones need to be changed in the first issue, and which
ones can be revised in the future, and it seems that they can be solved
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Release Notes:
- Fixes#4502
Notes:
I removed this line of code which removes the vim keymap contexts when
an editor is blurred.
16e6f5643c/crates/vim/src/vim.rs (L703-L705)
I tried whether the editor context would be poisoned when switching
between two editors and disabling vim mode and switching back but the
context looked normal. If this change is wrong, please advise. I could
not find why this piece of code was required.
This fixes#4502 as the reason why keybinds did not show up was because
the vim context was removed from the editor's keymap contexts. Other
paths for a fix could be to filter out vim predicates when finding
keybinds for actions but I believe that'd add unnecessary complexity.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This pull request introduces a new `InlineCompletionProvider` trait,
which enables making `Editor` copilot-agnostic and lets us push all the
copilot functionality into the `copilot_ui` module. Long-term, I would
like to merge `copilot` and `copilot_ui`, but right now `project`
depends on `copilot`, which makes this impossible.
The reason for adding this new trait is so that we can experiment with
other inline completion providers and swap them at runtime using config
settings.
Please, note also that we renamed some of the existing copilot actions
to be more agnostic (see release notes below). We still kept the old
actions bound for backwards-compatibility, but we should probably remove
them at some later version.
Also, as a drive-by, we added new methods to the `Global` trait that let
you read or mutate a global directly, e.g.:
```rs
MyGlobal::update(cx, |global, cx| {
});
```
Release Notes:
- Renamed the `copilot::Suggest` action to
`editor::ShowInlineCompletion`
- Renamed the `copilot::NextSuggestion` action to
`editor::NextInlineCompletion`
- Renamed the `copilot::PreviousSuggestion` action to
`editor::PreviousInlineCompletion`
- Renamed the `editor::AcceptPartialCopilotSuggestion` action to
`editor::AcceptPartialInlineCompletion`
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Kyle <kylek@zed.dev>
Co-authored-by: Kyle Kelley <rgbkrk@gmail.com>
This PR refactors the `CommandPaletteFilter` and
`CommandPaletteInterceptor` to better encapsulate their internals.
Previously these globals and their fields were publicly accessible,
which meant that there was a lot of reaching in and making
modifications.
These changes should make it easier to add additional consumers of these
hooks (right now they're primarily used by Vim mode).
Release Notes:
- N/A
In this commit, the Copy trait has been removed from Operator. This
change was necessary due to the value of operator may wish to attach a
motion type, which is not compatible with the Copy trait.
All instances where Operator was previously copied have been updated to
use the clone() or cloned() method instead. This includes function
parameters, variable assignments, and closures.
For #4440, I've only added support for normal, if it's visual mode,
would we like this to delete the current selection row and enter insert
mode?
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
The important change here is to ensure that undo never lands you in
visual mode; but we also take care to restore the selection the same way
vim does (visual line goes to beginning of line, visual block to the top
left, etc.).
To help make this behaviour feel right we also group any deletions that
started insert mode with the first text inserted.
Fixes: #7521
Release Notes:
- vim: Improved undo. It will now restore you to normal mode in the same
position as vim, and group deletions caused by `c` or `s` with the
concomitant insert.
([#7521](https://github.com/zed-industries/zed/issues/7521)).
I'm not sure how compliant you're aiming to be with vim, but the `f`
behavior is more useful when it can search on multiple lines instead of
a single one, so I'd like to propose this change.
This change is quite frequent in vim/neovim as a plugin (e.g.
[clever-f](https://github.com/VSCodeVim/Vim),
[improved-ft](https://github.com/backdround/improved-ft.nvim), etc), and
in other vim emulations (e.g.
[vscode-vim](https://github.com/VSCodeVim/Vim)).
This PR introduces a new `command_palette_hooks` crate that contains the
types used to hook into the behavior of the command palette.
The `CommandPaletteFilter` was previously extracted to the `copilot`
crate in #7095, solely because that was the earliest ancestor of the
crates that depended on it.
The `CommandPaletteInterceptor` was still defined in `command_palette`
itself.
Both of these types were consumed by other crates wanting to influence
the behavior of the command palette, but required taking a dependency on
the entire `command_palette` crate in order to gain access to these
hooks.
By moving them out into their own crate, we can improve the compile
order and make crates like `vim` able to begin building sooner without
having to wait for `command_palette` to finish compiling.
Here's a comparison of the compilation graph before and after (ignore
the timings):
#### Before
<img width="332" alt="Screenshot 2024-02-25 at 12 42 29 PM"
src="https://github.com/zed-industries/zed/assets/1486634/a57c662e-fbc2-41ab-9e30-cca17afa6c73">
#### After
<img width="362" alt="Screenshot 2024-02-25 at 12 51 15 PM"
src="https://github.com/zed-industries/zed/assets/1486634/c1a6d29c-b607-4604-8f1b-e5d318bf8849">
Release Notes:
- N/A
Release Notes:
- vim: Added a setting to control default clipboard behaviour. `{"vim":
{"use_system_clipboard": "never"}}` disables writing to the clipboard.
`"on_yank"` writes to the system clipboard only on yank, and `"always"`
preserves the current behavior. ([#4390
](https://github.com/zed-industries/zed/issues/4390))
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This should prevent a class of bugs where one queries the wrong type of
global, which results in oddities at runtime.
Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Add hidden_action_types to CommandPaletteFilter.
WindowContext.available_actions now returns global actions as well.
Co-authored-by: Antonio <antonio@zed.dev>
This mostly adds the commonly requested set (:wq and friends) and
a few that I use frequently
:<line> to go to a line number
:vsp / :sp to create a split
:cn / :cp to go to diagnostics
