Release Notes:
- Added support for line ranges in vim replace commands #9428
- not supporting anything other than bare line numbers right now
- ~need to figure out how to show range in question in search bar~
@ConradIrwin implemented showing a highlight of the selected range for a
short direction instead
- ~tests lol~
This PR adds support for replacing the current preview tab when using
GoToDefinition. Previously a tab, that was navigated away from, was
converted into a permanent tab and the new tab was opened as preview.
Without `enable_preview_from_code_navigation`:
https://github.com/zed-industries/zed/assets/53836821/99840724-d6ff-4738-a9c4-ee71a0001634
With `enable_preview_from_code_navigation`:
https://github.com/zed-industries/zed/assets/53836821/8c60efcb-d597-40bf-b08b-13faf5a289b6
Note: In the future I would like to improve support for the navigation
history, because right now tabs that are not "normal" project items,
e.g. FindAllReferences cannot be reopened
Release Notes:
- Added support for replacing the current preview tab when using code
navigation (`enable_preview_from_code_navigation`)
We're planning to associate "selection sources" with global element ids
to allow arbitrary UI text to be selected in GPUI. Previously, global
ids were not exposed outside the framework and we entangled management
of the element id stack with element state access. This was more
acceptable when element state was the only place we used global element
ids, but now that we're planning to use them more places, it makes sense
to deal with element identity as a first-class part of the element
system. We now ensure that the stack of element ids which forms the
current global element id is correctly managed in every phase of element
layout and paint and make the global id available to each element
method. In a subsequent PR, we'll use the global element id as part of
implementing arbitrary selection for UI text.
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
How it looks:
https://github.com/zed-industries/zed/assets/2101250/f564111c-1019-4442-b8a6-de338e12b12e
This PR adds cursor markers to the scrollbar. They work similar to
VSCode:
1. A cursor marker takes the whole scrollbar width.
2. It's always 2px high.
3. It uses the player's `cursor` color, so it may be helpful in the
collaboration mode.
There's a setting to switch cursor markers on/off:
```json
{
"scrollbar": {
"cursors": true
}
}
```
Implementation details:
- Unlike other markers, cursor markers are displayed synchronously.
Otherwise they don't feel smooth and sometimes freez on prolonged
up/down navigation.
- Cursor markers are automatically switched off when it's more than 100
of them.
- The minimum (non-cursor) marker height is now 5px. It allows the user
to see other markers under the cursor marker.
- The way the minimum height is imposed on markers has changed a bit to
keep consistency between markers of different types.
- Selected symbol markers use less vibrant color (`info` faded out a
little).
Release Notes:
- Added displaying of cursor markers in the scrollbar. They can be
switched on/off by the `scrollbar.cursors` setting.
Still TODO:
* Disable the new save-as for local projects
* Wire up sending the new path to the remote server
Release Notes:
- Added the ability to "Save-as" in remote projects
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Bennet <bennetbo@gmx.de>
Fixed the cursor selection being offset, the hollow cursor was being
displayed fine when not having text selected that's why it might not
have been noticed at first.
Release Notes:
- N/A
Improved:
0d6fb08b67
Exclude go-to-definition links returned by LSP that points to the
current cursor position. This fixes#10392 . Related PR #9243 .
The previous implementation first performs go-to-definition, and if the
selected text covers the clicked position, it figures out that it is
already clicking on a definition, and should instead look for
references.
However, the selected range does not necessarily cover the clicked
position after clicking on a definition, as in VIM mode.
After the PR, if cmd+click on definitions, the definition links would be
an empty list, so no go-to-definition is performed, and
find-all-references is performed instead.
Release Notes:
- Fixed#10392 , now `cmd+click`ing to find all references works in vim
mode.
This was introduced with #10979 and was caused by a missing call to
`cx.set_view_id` in `EditorElement`, which is necessary when rendering
`EditorElement` manually instead of via a view.
Release Notes:
- N/A
The new `ElementContext` was originally introduced to ensure the element
APIs could only be used inside of elements. Unfortunately, there were
many places where some of those APIs needed to be used, so
`WindowContext::with_element_context` was introduced, which defeated the
original safety purposes of having a specific context for elements.
This pull request merges `ElementContext` into `WindowContext` and adds
(debug) runtime checks to APIs that can only be used during certain
phases of element drawing.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
This is a crate only addition of a new version of the AssistantPanel.
We'll be putting this behind a feature flag while we iron out the new
experience.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Antonio Scandurra <antonio@zed.dev>
Co-authored-by: Nate Butler <nate@zed.dev>
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Max <max@zed.dev>
Release Notes:
- Made remote projects per-user instead of per-channel. If you'd like to
be part of the remote development alpha, please email hi@zed.dev.
---------
Co-authored-by: Bennet Bo Fenner <53836821+bennetbo@users.noreply.github.com>
Co-authored-by: Bennet <bennetbo@gmx.de>
Co-authored-by: Nate Butler <1714999+iamnbutler@users.noreply.github.com>
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
This pull request introduces the new
`ElementContext::request_autoscroll(bounds)` and
`ElementContext::take_autoscroll()` methods in GPUI. These new APIs
enable container elements such as `List` to change their scroll position
if one of their children requested an autoscroll. We plan to use this in
the revamped assistant.
As a drive-by, we also:
- Renamed `Element::before_layout` to `Element::request_layout`
- Renamed `Element::after_layout` to `Element::prepaint`
- Introduced a new `List::splice_focusable` method to splice focusable
elements into the list, which enables rendering offscreen elements that
are focused.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
This PR includes two relevant changes:
- Platform binds (super, windows, cmd) will now parse on all platforms,
regardless of which one is being used. While very counter-intuitive
(this means that `cmd-d` will actually be triggered by `win-d` on
windows) this makes it possible to reuse keymap files across platforms
easily
- There is now a KeyContext `os == linux`, `os == macos` or `os ==
windows` available in keymaps. This allows users to specify certain
blocks of keybinds only for one OS, allowing you to minimize the amount
of keymappings that you have to re-configure for each platform.
Release Notes:
- Added `os` KeyContext, set to either `linux`, `macos` or `windows`
- Fixed keymap parsing errors when `cmd` was used on linux, `super` was
used on mac, etc.
This PR adds an action to expand the excerpts lines of context in a
multibuffer.
Release Notes:
- Added an `editor::ExpandExcerpts` action (bound to `shift-enter` by
default), which can expand the excerpt the cursor is currently in by 3
lines. You can customize the number of lines by rebinding this action
like so:
```json5
// In your keybindings array...
{
"context": "Editor && mode == full",
"bindings": {
"shift-enter": ["editor::ExpandExcerpts", { "lines": 5 }],
}
}
```
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Max <max@zed.dev>
Editor scrollbar has several issues that show up on large files:
- The thumb scrolls beyond the window.
- When dragged, the thumb goes out of sync with the mouse pointer.
- When the scrollbar trunk is clicked, the thumb jumps incorrectly.
https://github.com/zed-industries/zed/assets/2101250/320dba59-a526-4e68-99b3-1186271ba839
The reason is that the scrollbar now has two modes:
1. The "basic mode" for small files, when the thumb height correctly
represents the visible area, i.e. the top of the thumb matches the top
visible row (let's call it top-to-top sync), and the bottom of the thumb
matches the bottom visible row.
2. The "extended mode" for large files, when thumb becomes too small and
we have to impose minimal height to it. In this mode we have a vertical
offset of the first row position inside the scrollbar, we try to
position the thumb center-to-center with the editor.
...and the second mode is not implemented correctly. Also, mouse event
handlers ignore it. It is possible to fix this implementation, but I'm
not sure if it worth doing because it a) leads to some confusing cases
(for instance, in the extended mode the first row marker is not at the
top of the scrollbar), and b) differs from what all other editors do.
Here's a previous mentioning of this problem:
https://github.com/zed-industries/zed/pull/9080#pullrequestreview-1927465293
This PR changes the "extended mode", making it synchronize the thumb
top-to-top with the editor. It solves all the mentioned problems and
makes the scroll thumb work the same whay as in other editors.
But if you want to stick to the idea of the center-to-center sync for
large files, I can do that too.
Release Notes:
- Fixed scroll thumb behaviour.
Optionally, include screenshots / media showcasing your addition that
can be included in the release notes.
- N/A
This PR adds an editor controls menu to the tool bar. This menu will be
used to contain controls that toggle visual features in the editor, like
toggling inlay hints, showing git status or blame, hiding the gutter,
hiding or showing elements in the tool bar, etc.
For the moment, this consolidates the new Inline Git Blame toggle and
the old Inlay Hints toggle. In the future it will contain additional
controls.
Before:
After:
---
Release Notes:
- Added an editor controls menu to the tool bar. This will contain
visual, editor-specific options like toggling inlay hints, showing git
status or blame, etc.
- Removed the top level inlay hint toggle from the tool bar due to the
above change.
- Added the ability to toggle inline git blame from the new editor
controls menu.
---------
Co-authored-by: Marshall Bowers <1486634+maxdeviant@users.noreply.github.com>
Zed displays scrollbar markers of three types: git diffs, background
highlights and diagnostics. At the moment, the "background highlights"
markers are displayed for all the supported highlights:
- Occurences of the symbol under cursor.
- Search results.
- Scope boundaries (only works when a symbol is selected).
- Active hover popover position.
They all use the same color, which leads to confusing results. For
instance, in the following case I expect to see markers for the
`new_anchor` occurences in lines 43 and 47. But besides them, there're
also scope-markers for `ScrollAnchor` initialization block in lines 46
and 49, which makes me think that there're four places where
`new_anchor` appears.
<img width="740" alt="zed-scrollbar-markers"
src="https://github.com/zed-industries/zed/assets/2101250/78700e6b-fdd1-4c2f-beff-e564d8defc13">
Existing settings `selection` and `symbol_selection` in the `scrollbar`
section [don't work as
expected](https://github.com/zed-industries/zed/pull/10080#discussion_r1552325493),
which increases confusion.
This PR only leaves two types of bg-highlight-markers and provides
dedicated settings for them:
- Occurences of the symbol under cursor. Setting: `selected_symbol`,
default is `true`.
- Search results. Setting: `search_results`, default is `true`.
The `selection` and `symbol_selection` settings are not used anymore.
Release Notes:
- Breaking changes. Settings `selection` and `symbol_selection` in the
`scrollbar` section renamed to `search_results` and `selected_symbol`
respectively. Fixed the effect of these settings on which markers are
displayed on the scrollbar.
Optionally, include screenshots / media showcasing your addition that
can be included in the release notes.
- N/A
/cc @mrnugget
This moves the diagnostics and find all references to be in line with
the search pane. This also centralizes the constant into the editor code
base.
Release Notes:
- Increased diagnostic context to match the project search context.
Some people (like myself) use touchpads for development and I find Zed's
default scroll sensitivity to be slower than I like. This change adds a
scroll sensitivity multiplier that allows users to customize the speed
of their scrolling.
Release Notes:
- Added a setting under "scroll_sensitivity" that allows user to control
the scroll sensitivity. This value acts as a multiplier for the
horizontal and vertical scroll speed.
This adds so-called "inline git blame" to the editor that, when turned
on, shows `git blame` information about the current line inline:
When the inline information is hovered, a new tooltip appears that
contains more information on the current commit:
The commit message in this tooltip is rendered as Markdown, is
scrollable and clickable.
The tooltip is now also the tooltip used in the gutter:
## Settings
1. The inline git blame information can be turned on and off via
settings:
```json
{
"git": {
"inline_blame": {
"enabled": true
}
}
}
```
2. Optionally, a delay can be configured. When a delay is set, the
inline blame information will only show up `x milliseconds` after a
cursor movement:
```json
{
"git": {
"inline_blame": {
"enabled": true,
"delay_ms": 600
}
}
}
```
3. It can also be turned on/off for the current buffer with `editor:
toggle git blame inline`.
## To be done in follow-up PRs
- [ ] Add link to pull request in tooltip
- [ ] Add avatars of users if possible
## Release notes
Release Notes:
- Added inline `git blame` information the editor. It can be turned on
in the settings with `{"git": { "inline_blame": "on" } }` for every
buffer or, temporarily for the current buffer, with `editor: toggle git
blame inline`.
This introduces semantic indexing in Zed based on chunking text from
files in the developer's workspace and creating vector embeddings using
an embedding model. As part of this, we've created an embeddings
provider trait that allows us to work with OpenAI, a local Ollama model,
or a Zed hosted embedding.
The semantic index is built by breaking down text for known
(programming) languages into manageable chunks that are smaller than the
max token size. Each chunk is then fed to a language model to create a
high dimensional vector which is then normalized to a unit vector to
allow fast comparison with other vectors with a simple dot product.
Alongside the vector, we store the path of the file and the range within
the document where the vector was sourced from.
Zed will soon grok contextual similarity across different text snippets,
allowing for natural language search beyond keyword matching. This is
being put together both for human-based search as well as providing
results to Large Language Models to allow them to refine how they help
developers.
Remaining todo:
* [x] Change `provider` to `model` within the zed hosted embeddings
database (as its currently a combo of the provider and the model in one
name)
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Antonio <antonio@zed.dev>
This reverts commit caed275fbf.
NOTE: this should not be merged until #9668 is on stable and the
`ZedVersion#can_collaborate` is updated to exclude all clients without
that change.
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
