This PR attaches the thread ID and the new prompt ID to telemetry events
for completions in the Agent panel.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
A "Near" block acts similarly to a "Below" block, but can (if it's
height is <= one line height) be shown on the end of the preceding line
instead of adding an entire blank line to the editor.
You can test it out by pasting this into `go_to_diagnostic_impl` and
then press `F8`
```
let buffer = self.buffer.read(cx).snapshot(cx);
let selection = self.selections.newest_anchor();
self.display_map.update(cx, |display_map, cx| {
display_map.insert_blocks(
[BlockProperties {
placement: BlockPlacement::Near(selection.start),
height: Some(1),
style: BlockStyle::Flex,
render: Arc::new(|_| {
div()
.w(px(100.))
.h(px(16.))
.bg(gpui::hsla(0., 0., 1., 0.5))
.into_any_element()
}),
priority: 0,
}],
cx,
)
});
return;
```
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
This PR renames the `AssistantEvent` type to `AssistantEventData`, as it
no longer represents the event itself, just the data needed to construct
it.
Pulling out of https://github.com/zed-industries/zed/pull/25179.
Release Notes:
- N/A
Closes: https://github.com/zed-industries/zed/issues/20582
Allows users to select a specific model for each AI-powered feature:
- Agent panel
- Inline assistant
- Thread summarization
- Commit message generation
If unspecified for a given feature, it will use the `default_model`
setting.
Release Notes:
- Added support for configuring a specific model for each AI-powered
feature
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
Part of #27171
Follows-up the change in
https://github.com/zed-industries/zed/pull/22346 to consider the case
where the assistant-panel is disabled via settings (as also noted in
[this
comment](https://github.com/zed-industries/zed/pull/22346#issuecomment-2558372412),
Notably, only the explicit case is considered here. Can extend this
change to also cover the implicit case where the button is disabled if
requested.).
Currently, if the user toggles the right dock, the assistant panel will
be shown even if it is disabled via settings, because it has the highest
priority (see
https://github.com/zed-industries/zed/pull/22346#issuecomment-2564890493).
With this change, the assistant panel is no longer activated when
disabled and the dock with the next highest activation order is
activated instead.
I did not opt in to make the priority configurabe, as I agree with
https://github.com/zed-industries/zed/pull/22346#issuecomment-2564890493
that this will most likely rarely be used (the active panel is only none
on the first toggle of the dock, afterwards it remains set for the
remainder of the session).
Release Notes:
- `workspace::ToggleRightDock` will no longer open the assistant panel
when it is disabled via settings.
This is the core change:
https://github.com/zed-industries/zed/pull/26758/files#diff-044302c0d57147af17e68a0009fee3e8dcdfb4f32c27a915e70cfa80e987f765R1052
TODO:
- [x] Use AsyncFn instead of Fn() -> Future in GPUI spawn methods
- [x] Implement it in the whole app
- [x] Implement it in the debugger
- [x] Glance at the RPC crate, and see if those box future methods can
be switched over. Answer: It can't directly, as you can't make an
AsyncFn* into a trait object. There's ways around that, but they're all
more complex than just keeping the code as is.
- [ ] Fix platform specific code
Release Notes:
- N/A
Similar to how tasks are fetched via LSP, also queries for document's
code lens and filters the ones with the commands, supported in server
capabilities.
Whatever's left and applicable to the range given, is added to the
actions menu:
This way, Zed can get more actions to run, albeit neither r-a nor vtsls
seem to provide anything by default.
Currently, there are no plans to render code lens the way as in VSCode,
it's just the extra actions that are show in the menu.
------------------
As part of the attempts to use rust-analyzer LSP data about the
runnables, I've explored a way to get this data via standard LSP.
When particular experimental client capabilities are enabled (similar to
how clangd does this now), r-a starts to send back code lens with the
data needed to run a cargo command:
```
{"jsonrpc":"2.0","id":48,"result":{"range":{"start":{"line":0,"character":0},"end":{"line":98,"character":0}},"command":{"title":"▶︎ Run Tests","command":"rust-analyzer.runSingle","arguments":[{"label":"test-mod tests::ecparser","location":{"targetUri":"file:///Users/someonetoignore/work/ec4rs/src/tests/ecparser.rs","targetRange":{"start":{"line":0,"character":0},"end":{"line":98,"character":0}},"targetSelectionRange":{"start":{"line":0,"character":0},"end":{"line":98,"character":0}}},"kind":"cargo","args":{"environment":{"RUSTC_TOOLCHAIN":"/Users/someonetoignore/.rustup/toolchains/1.85-aarch64-apple-darwin"},"cwd":"/Users/someonetoignore/work/ec4rs","overrideCargo":null,"workspaceRoot":"/Users/someonetoignore/work/ec4rs","cargoArgs":["test","--package","ec4rs","--lib"],"executableArgs":["tests::ecparser","--show-output"]}}]}}}
```
This data is passed as is to VSCode task processor, registered in
60cd01864a/editors/code/src/main.ts (L195)
where it gets eventually executed as a VSCode's task, all handled by the
r-a's extension code.
rust-analyzer does not declare server capabilities for such tasks, and
has no `workspace/executeCommand` handle, and Zed needs an interactive
terminal output during the test runs, so we cannot ask rust-analyzer
more than these descriptions.
Given that Zed needs experimental capabilities set to get these lens:
60cd01864a/editors/code/src/client.ts (L318-L327)
and that the lens may contain other odd tasks (e.g. docs opening or
references lookup), a protocol extension to get runnables looks more
preferred than lens:
https://rust-analyzer.github.io/book/contributing/lsp-extensions.html#runnables
This PR does not include any work on this direction, limiting to the
general code lens support.
As a proof of concept, it's possible to get the lens and even attempt to
run it, to no avail:
Release Notes:
- Used `textDocument/codeLens` data in the actions menu when applicable
Release Notes:
- Multibuffers now use less vertical space for excerpt boundaries.
Additionally the expand up/down arrows are hidden at the start and end
of the buffers
---------
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Zed AI <claude-3.5-sonnet@zed.dev>
A preparation for https://github.com/zed-industries/zed/issues/4957 that
pushes all LSP-related data out from the basic completion item, so that
it's possible to create completion items without any trace of LSP
clearly.
Release Notes:
- N/A
This PR fixes the language model selector.
I tried to piece together the state prior to #25697 (the state it was in
at 11838cf89e) while retaining unrelated
changes that happened since then.
Release Notes:
- Fixed an issue where language models would not be authenticated until
after the model selector was opened (Preview only).
This fixes a major performance issue in the current git beta.
This PR also removes the PopoverButton component, which was easy to
misuse.
Release Notes:
- Git Beta: Fix frame drops caused by opening the git panel
---------
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
This PR moves the `report_assistant_event` function from the
`language_models` crate to the `language_model` crate.
This allows us to drop some dependencies on `language_models`.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/10122
Closes https://github.com/zed-industries/zed/issues/25034
When formatting buffers or reloading them after they change on disk, we
performed a diff between the buffer's current contents and the new
content. We need this diff in order preserve the positions of cursors
and other decorations when updating the buffer's text.
In order to handle changes within lines, we would previously compute a
*character-wise* diff. This was extremely expensive for large files.
This PR gets rid of the character-wise diff, and instead performs a
normal line-wise diff. Then, for certain replace hunks, we compute a
secondary word-based diff. Also, I've switched to the
[`imara-diff`](https://github.com/pascalkuthe/imara-diff) crate, instead
of `similar`.
Release Notes:
- Fixed a hang that could occur when large files were changed on disk or
formatted.
This reverts commit 9ef0501853 due to a
panic.
```
{
"thread": "main",
"payload": "9 is not a valid char boundary in path \"crates/…/LiveKitBridge/\"",
"location_data": {
"file": "crates/file_finder/src/file_finder.rs",
"line": 646
}
}
```
Release Notes:
- N/A
Done automatically with
> ast-grep -p '$A.background_executor().spawn($B)' -r
'$A.background_spawn($B)' --update-all --globs "\!crates/gpui"
Followed by:
* `cargo fmt`
* Unexpected need to remove some trailing whitespace.
* Manually adding imports of `gpui::{AppContext as _}` which provides
`background_spawn`
* Added `AppContext as _` to existing use of `AppContext`
Release Notes:
- N/A
This PR makes progress on #7711 by identifying any common prefix of the
paths in the file finder's search results, and replacing the "interior"
of that prefix---every path segment but the first and last---with `...`,
when a heuristic indicates that the longest path would otherwise
overflow the modal.
The elision is not applied to any segment that contains a match for the
search query.
There may be more work to do on #7711 in the case of long result paths
that do not share a significant common prefix.
Release Notes:
- Improved display of long paths in the file finder modal
Co-authored-by: Max <max@zed.dev>
This Pull Request tackles the issue outline in #14287 by changing the
way `KeyBinding`s for vim mode are displayed in the command palette.
It's worth pointing out that this whole thing was pretty much
implemented by Conrad Irwin during a pairing session, I just tried to
clean up some other changes introduced for a different issue, while
improving some comments.
Here's a quick list of the changes introduced:
- Update `KeyBinding` with a new `vim_mode` field to determine whether
the keybinding should be displayed in vim mode.
- Update the way `KeyBinding` is rendered, so as to detect if the
keybinding is for vim mode, if it is, only display keys in uppercase if
they require the shift key.
- Introduce a new global state – `VimStyle(bool)` - use to determine
whether `vim_mode` should be enabled or disabled when creating a new
`KeyBinding` struct. This global state is automatically set by the `vim`
crate whenever vim mode is enabled or disabled.
- Since the app's context is now required when building a `KeyBinding` ,
update a lot of callers to correctly pass this context.
And before and after screenshots, for comparison:
| before | after |
|--------|-------|
| <img width="1050" alt="SCR-20250205-tyeq"
src="https://github.com/user-attachments/assets/e577206d-2a3d-4e06-a96f-a98899cc15c0"
/> | <img width="1050" alt="SCR-20250205-tylh"
src="https://github.com/user-attachments/assets/ebbf70a9-e838-4d32-aee5-0ffde94d65fb"
/> |
Closes#14287
Release Notes:
- Fix rendering of vim commands to preserve case sensitivity
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
We were reading edit prediction settings too often, causing frames to be
dropped. We'll now cache them and update them from
`update_visible_inline_completion`.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/23894
Reworks all trigger declarations from
`.trigger(element.tooltip(tooltip))` into
`.trigger_with_tooltip(element, tooltip)` , with new API disallowing
simultaneous trigger and tooltip display.
All existing `.trigger(` calls were replaced, except 2 not applicable
(in dock.rs and pane.rs), 15 left as ones without tooltips, and 2
unchanged places in `inline_completion_button.rs`, where
0f7bb2e9fd/crates/inline_completion_button/src/inline_completion_button.rs (L311-L319)
`with_animation` does not allow us to simply use the same approach.
Release Notes:
- Fixed hover tooltips appearing after related element is pressed
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Fix bugs caused by the window context PR, where the window could be on
the stack and is then requested from the App.
This PR also adds derive macros for `AppContext` and `VisualContext` so
that it's easy to define further contexts in API code, such as
`editor::BlockContext`.
Release Notes:
- N/A
There's still a bit more work to do on this, but this PR is compiling
(with warnings) after eliminating the key types. When the tasks below
are complete, this will be the new narrative for GPUI:
- `Entity<T>` - This replaces `View<T>`/`Model<T>`. It represents a unit
of state, and if `T` implements `Render`, then `Entity<T>` implements
`Element`.
- `&mut App` This replaces `AppContext` and represents the app.
- `&mut Context<T>` This replaces `ModelContext` and derefs to `App`. It
is provided by the framework when updating an entity.
- `&mut Window` Broken out of `&mut WindowContext` which no longer
exists. Every method that once took `&mut WindowContext` now takes `&mut
Window, &mut App` and every method that took `&mut ViewContext<T>` now
takes `&mut Window, &mut Context<T>`
Not pictured here are the two other failed attempts. It's been quite a
month!
Tasks:
- [x] Remove `View`, `ViewContext`, `WindowContext` and thread through
`Window`
- [x] [@cole-miller @mikayla-maki] Redraw window when entities change
- [x] [@cole-miller @mikayla-maki] Get examples and Zed running
- [x] [@cole-miller @mikayla-maki] Fix Zed rendering
- [x] [@mikayla-maki] Fix todo! macros and comments
- [x] Fix a bug where the editor would not be redrawn because of view
caching
- [x] remove publicness window.notify() and replace with
`AppContext::notify`
- [x] remove `observe_new_window_models`, replace with
`observe_new_models` with an optional window
- [x] Fix a bug where the project panel would not be redrawn because of
the wrong refresh() call being used
- [x] Fix the tests
- [x] Fix warnings by eliminating `Window` params or using `_`
- [x] Fix conflicts
- [x] Simplify generic code where possible
- [x] Rename types
- [ ] Update docs
### issues post merge
- [x] Issues switching between normal and insert mode
- [x] Assistant re-rendering failure
- [x] Vim test failures
- [x] Mac build issue
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Joseph <joseph@zed.dev>
Co-authored-by: max <max@zed.dev>
Co-authored-by: Michael Sloan <michael@zed.dev>
Co-authored-by: Mikayla Maki <mikaylamaki@Mikaylas-MacBook-Pro.local>
Co-authored-by: Mikayla <mikayla.c.maki@gmail.com>
Co-authored-by: joão <joao@zed.dev>
Closes#12553
* [x] Fix `diff_hunk_before`
* [x] Fix failure to show deleted text when expanding hunk w/ cursor on
second line of the hunk
* [x] Failure to expand diff hunk below the cursor.
* [x] Delete the whole file, and expand the diff. Backspace over the
deleted hunk, panic!
* [x] Go-to-line now counts the diff hunks, but it should not
* [x] backspace at the beginning of a deleted hunk deletes too much text
* [x] Indent guides are rendered incorrectly
* [ ] Fix randomized multi buffer tests
Maybe:
* [ ] Buffer search should include deleted text (in vim mode it turns
out I use `/x` all the time to jump to the next x I can see).
* [ ] vim: should refuse to switch into insert mode if selection is
fully within a diff.
* [ ] vim `o` command when cursor is on last line of deleted hunk.
* [ ] vim `shift-o` on first line of deleted hunk moves cursor but
doesn't insert line
* [x] `enter` at end of diff hunk inserts a new line but doesn't move
cursor
* [x] (`shift-enter` at start of diff hunk does nothing)
* [ ] Inserting a line just before an expanded hunk collapses it
Release Notes:
- Improved diff rendering, allowing you to navigate with your cursor
inside of deleted text in diff hunks.
---------
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Cole <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Michael <michael@zed.dev>
Co-authored-by: Agus <agus@zed.dev>
Co-authored-by: João <joao@zed.dev>
This PR consolidates the two Assistant panels into one for users in the
`assistant2` feature flag.
Now that the Assistant1 prompt editor is accessible through the
Assistant2 panel, we no longer have a need to show both panels.
Release Notes:
- N/A
This PR extracts the `ContextEditor` to the `assistant_context_editor`
crate.
As part of this, we have decoupled the `ContextEditor` from the
`AssistantPanel`.
There is now an `AssistantPanelDelegate` that the `ContextEditor` uses
when it needs to interface with the Assistant panel.
Release Notes:
- N/A
This PR adds a new `assistant_context_editor` crate.
This will ultimately house the `ContextEditor` so that it can be
consumed by both `assistant` and `assistant2`.
For the purposes of this PR, we just introduce the crate and move some
supporting constructs to it, such as the `ContextStore`.
Release Notes:
- N/A
This PR fixes two visual issues, that were caused by the fact that we
were always painting the horizontal scrollbar even if there is no
horizontal scrolling possible
Obscuring deleted lines when using the inline assistant:
https://github.com/user-attachments/assets/f8460c3f-403e-40a6-8622-65268ba2d875
Cutting off text even when horizontal scrolling is not possible:
https://github.com/user-attachments/assets/23c909f7-1c23-4693-8edc-40a2f089d4a8
This issue was only present in some themes (e.g. Nord, Catpuccin)
Closes#22716
Release Notes:
- Fixed an issue where horizontal scrollbars of editors would always be
painted (even if there is no horizontal scrolling to be done)
This PR extracts the streaming diff implementation to its own
`streaming_diff` crate.
It was duplicated between `assistant` and `assistant2`, but their
implementations were exactly the same (and I don't see a reason why they
would need to diverge).
Release Notes:
- N/A
This PR adds a new `prompt_library` crate and extracts the `PromptStore`
and `PromptBuilder` to it.
Eventually we'll want to house the `PromptLibrary` itself in this crate,
but right now that involves untangling a few dependencies.
Release Notes:
- N/A
This PR dedupes the `AssistantSettings` so we can use the same settings
for both Assistant1 and Assistant2.
We originally forked them so we could change the Assistant2 settings
freely, but given our rollout strategy for the new Assistant, I don't
think that makes sense.
This also fixes the issue where the JSON language server would show a
"Matches multiple schemas when only one must validate" warning in
`settings.json`.
Closes#23171.
Release Notes:
- Fixed the "Matches multiple schemas when only one must validate"
warning for the `assistant` setting.
This PR is a follow-up to
https://github.com/zed-industries/zed/pull/22911 to further improve the
registration of code action providers for the Assistant in order to
prevent duplicates.
The `CodeActionProvider` trait now has an `id` method that is used to
return a unique ID for a code action provider. We use this to prevent
registering duplicates of the same provider.
The registration of the code action providers for Assistant1 and
Assistant2 have also been reworked. Previously we were not call the
registration function—and thus setting up the subscriptions—until we
resolved the feature flags. However, this could lead to the registration
happening too late for existing workspace items.
We now perform the registration right away and then remove the undesired
code action providers once the feature flags have been resolved.
Release Notes:
- N/A
This PR fixes the duplicated `Fix with Assistant` code actions that were
being shown in the code actions menu.
This fix isn't 100% ideal, as there is an edge case in buffers that are
already open when the workspace loads, as we may not observe the feature
flags in time to register the code action providers by the time we
receive the event that an item was added to the workspace.
Closes https://github.com/zed-industries/zed/issues/22400.
Release Notes:
- Fixed duplicate "Fix with Assistant" entries showing in the code
action list.
- [x] Rewrite worktree git handling
- [x] Fix tests
- [x] Fix `test_propagate_statuses_for_repos_under_project`
- [x] Replace `WorkDirectoryEntry` with `WorkDirectory` in
`RepositoryEntry`
- [x] Add a worktree event for capturing git status changes
- [x] Confirm that the local repositories are correctly updating the new
WorkDirectory field
- [x] Implement the git statuses query as a join when pulling entries
out of worktree
- [x] Use this new join to implement the project panel and outline
panel.
- [x] Synchronize git statuses over the wire for collab and remote dev
(use the existing `worktree_repository_statuses` table, adjust as
needed)
- [x] Only send changed statuses to collab
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.com>
Co-authored-by: Nathan <nathan@zed.dev>
`CodeContextMenu` is always accessed on one thread, so only `Rc`s and
`Rc<RefCell<_>>` are needed. There should be tiny performance benefits
from this. The main benefit of this is that when seeing code accessing a
`RwLock` it would be reasonable to wonder whether it will block. The
only potential downside is the potential for panics due to overlapping
borrows of the RefCells. I think this is an acceptable risk because most
errors of this nature will be local or will be caught by clippy via the
check for holding a RefCell reference over an `await`.
Release Notes:
- N/A
