Closes https://github.com/zed-industries/zed/issues/27619
Fixes issue with right wrapped movement when a multi-byte character is
at the end of the line. This is done by grabbing the last character on
the current row and using that characters size to calculate the
`max_column` variable, which is used to decide if the next right
movement should move down the line or not.
We did notice a bit of code that could be an issue that we wanted to
call out.
[Here](https://github.com/zed-industries/zed/blob/main/crates/editor/src/display_map.rs#L1070)
inside of `clip_at_line_end` it also does a saturating_sub(1), assuming
a single byte character. We didn't run into any issues due to this line
but felt like a similar bug. We can apply a similar fix if wanted to
pose the question first.
Test case: Moving to next line when eol is a multi-byte character
https://github.com/user-attachments/assets/1021ab1f-f49d-4986-8f9a-8cfc7e5c91bc
Release Notes:
- Fixed issue in vim forward spacing when a multi-byte character is at
the eol
---------
Co-authored-by: KyleBarton <kjbarton4@gmail.com>
Before this change we didn't explicitly handle vim's exclusive-linewise
edgecase
(https://neovim.io/doc/user/motion.html#exclusive).
Instead we had hard-coded workarounds in a few places to make our tests
pass.
The most pernicious of these workarounds was that we represented a
visual line
selection as including the trailing newline (or leading newline for
files that
end with no newline), which other code had to undo to get back to what
the user
indended.
Closes#21440
Updates #6900
Release Notes:
- vim: Fixed `d]}` to not delete the closing brace
- vim: Fixed `d}` from the start of the line to not delete the paragraph
separator
- vim: Fixed `d}` from the middle of the line to not delete the final
newline
## Summary
This PR starts the process of adding debug task locators to Zed's
debugger system. A task locator is a secondary resolution phase that
allows a debug task to run a command before starting a debug session and
then uses the output of the run command to configure itself.
Locators are most applicable when debugging a compiled language but will
be helpful for any language as well.
## Architecture
At a high level, this works by adding a debug task queue to `Workspace`.
Which add's a debug configuration associated with a `TaskId` whenever a
resolved task with a debug config is added to `TaskInventory`'s queue.
Then, when the `SpawnInTerminal` task finishes running, it emits its
task_id and the result of the ran task.
When a ran task exits successfully, `Workspace` tells `Project` to start
a debug session using its stored debug config, then `DapStore` queries
the `LocatorStore` to configure the debug configuration if it has a
valid locator argument.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/11626
Part of https://github.com/zed-industries/zed/issues/12853
`"restore_on_file_reopen": true` in workspace settings can now be used
to enable and disable editor data between file reopens in the same pane:
https://github.com/user-attachments/assets/8d938ee1-d854-42a8-bbc3-2a4e4d7d5933
The settings are generic and panes' data store can be extended for
further entities, beyond editors.
---------------
Impl details:
Currently, the project entry IDs seem to be stable across file reopens,
unlike BufferIds, so those were used.
Originally, the DB data was considered over in-memory one as editors
serialize their state anyway, but managing and exposing PaneIds out of
the DB is quite tedious and joining the DB data otherwise is not
possible.
Release Notes:
- Started to restore editor state on reopen
Closes#27385
Builds on #27604 so that `vim::OtherEnd` works in visual block mode.
This is accomplished by reversing the order of active selections in the
buffer when the user hit `o`, so that the cursor moves diagonally across
the selection. The current behavior is preserved for `shift-o`, which is
how the cursors behave in vim.
We'll close#27604 since this encapsulates that change, but if you'd
prefer to take only the visual block motion component, we'll keep the
branch for #27604 open.
Test case: growing a box down and to the right, other ending, followed
by growing and shrinking the box:
https://github.com/user-attachments/assets/1df544e1-efce-4354-b354-bbfec007a7df
Test case: growing a box up and to the left, other ending, followed by
growing and shrinking the box:
https://github.com/user-attachments/assets/2f6d7729-c63a-4486-960b-23474c2e507a
Release Notes:
- Improved visual block mode when cursor is at beginning of selection
- Improved visual block mode so that `o` and `shift-o` reach parity with
vim
---------
Co-authored-by: KyleBarton <kjbarton4@gmail.com>
Closes#22398
Release Notes:
- vim: Adds `'` and `"` marks (last location jumped from in the current
buffer, and location when last exiting a buffer)
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#26884
Release Notes:
- vim: Added `:marks` which brings up list of current marks
- confirming on selected mark in the view jumps to that mark
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#26806
Changes: Clips the new point with `Bias::Right` like in
`saturating_right`
Release Notes:
- vim: Fixed `space` not handling non-ascii characters
This is the core change:
https://github.com/zed-industries/zed/pull/26758/files#diff-044302c0d57147af17e68a0009fee3e8dcdfb4f32c27a915e70cfa80e987f765R1052
TODO:
- [x] Use AsyncFn instead of Fn() -> Future in GPUI spawn methods
- [x] Implement it in the whole app
- [x] Implement it in the debugger
- [x] Glance at the RPC crate, and see if those box future methods can
be switched over. Answer: It can't directly, as you can't make an
AsyncFn* into a trait object. There's ways around that, but they're all
more complex than just keeping the code as is.
- [ ] Fix platform specific code
Release Notes:
- N/A
Release Notes:
- Fixed involuntary joining of lines when typing in the commit message
editor
- Fixed being unable to type whitespace after a comment character at the
start of a line in the commit message editor
### DISCLAIMER
> As of 6th March 2025, debugger is still in development. We plan to
merge it behind a staff-only feature flag for staff use only, followed
by non-public release and then finally a public one (akin to how Git
panel release was handled). This is done to ensure the best experience
when it gets released.
### END OF DISCLAIMER
**The current state of the debugger implementation:**
https://github.com/user-attachments/assets/c4deff07-80dd-4dc6-ad2e-0c252a478fe9https://github.com/user-attachments/assets/e1ed2345-b750-4bb6-9c97-50961b76904f
----
All the todo's are in the following channel, so it's easier to work on
this together:
https://zed.dev/channel/zed-debugger-11370
If you are on Linux, you can use the following command to join the
channel:
```cli
zed https://zed.dev/channel/zed-debugger-11370
```
## Current Features
- Collab
- Breakpoints
- Sync when you (re)join a project
- Sync when you add/remove a breakpoint
- Sync active debug line
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Restart stack frame (if adapter supports this)
- Variables
- Loaded sources
- Modules
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Debug console
- Breakpoints
- Log breakpoints
- line breakpoints
- Persistent between zed sessions (configurable)
- Multi buffer support
- Toggle disable/enable all breakpoints
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Show collapsed stack frames
- Restart stack frame (if adapter supports this)
- Loaded sources
- View all used loaded sources if supported by adapter.
- Modules
- View all used modules (if adapter supports this)
- Variables
- Copy value
- Copy name
- Copy memory reference
- Set value (if adapter supports this)
- keyboard navigation
- Debug Console
- See logs
- View output that was sent from debug adapter
- Output grouping
- Evaluate code
- Updates the variable list
- Auto completion
- If not supported by adapter, we will show auto-completion for existing
variables
- Debug Terminal
- Run custom commands and change env values right inside your Zed
terminal
- Attach to process (if adapter supports this)
- Process picker
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Disconnect
- Restart
- Stop
- Warning when a debug session exited without hitting any breakpoint
- Debug view to see Adapter/RPC log messages
- Testing
- Fake debug adapter
- Fake requests & events
---
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
Co-authored-by: Piotr <piotr@zed.dev>
Closes https://github.com/zed-industries/zed/issues/13111
Release Notes:
- vim: Added global marks `'[A-Z]`
- vim: Added persistence for global (and local) marks. When re-opening
the same workspace your previous marks will be available.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Release Notes:
- Multibuffers now use less vertical space for excerpt boundaries.
Additionally the expand up/down arrows are hidden at the start and end
of the buffers
---------
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Zed AI <claude-3.5-sonnet@zed.dev>
This adds the ability for the editor to implement hard wrap (similar to
"textwidth" in vim).
If you are typing and your line extends beyond the limit, a newline is
inserted before the most recent space on the line. If you are otherwise
editing the line, pasting, etc. then you will need to manually rewrap.
Release Notes:
- git: Commit messages are now wrapped "as you type" to 72 characters.
Closes https://github.com/zed-industries/zed/issues/24914 (again)
Release Notes:
- Fixed an issue where multi-line pasted content was auto-indented
incorrectly if copied from the middle of an existing line.
Closes https://github.com/zed-industries/zed/discussions/25665
> Currently Zed is missing quite an useful Vim motion: <count>% (go to
{count} percentage in the file).
Description:
{count}% - Go to {count} percentage in the file, on the first non-blank
in the line linewise. To compute the new line number this formula is
used: ({count} * number-of-lines + 99) / 100 .
> [Link](https://neovim.io/doc/user/motion.html#N%25).
Release Notes:
- vim: Added `<count>%` motion
---------
Co-authored-by: Conrad Irwin <conrad@zed.dev>
https://github.com/zed-industries/zed/pull/25663#issuecomment-2686095807
Renamed the `vim::Backspace` and `vim::Space` actions to
`vim::WrappingLeft` and `vim::WrappingRight` respectively. The old names
are still available, but they are marked as deprecated and users are
advised to use the new names.
Also added a paragraph to the docs describing how to enable wrapping
cursor navigation.
These changes tackle two issues with running terminal commands via vim
mode:
- When using `!!` the tab's title was set to `!!` instead of the
previous command that was run and these changes fix that in order to
always display the previous command in the tab's title when re-running
the command with `!!`
- For a terminal command, pressing the rerun button would actually bring
up the task palette, so this has been updated in order to disable the
rerun button when the terminal tab was spawned via a vim command
Closes#25800
Release Notes:
- Fixed the terminal tab title when using `!!` to rerun the last command
- Improved the terminal tab for when command is run via vim mode, in
order to disable the rerun button, seeing as Zed does not support it
Closes#18157
Release Notes:
- vim: Added `:reg[isters]` to show the current values of registers
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#22536
Changes:
- Visual and visual block: Cursor at start of selection.
- Visual line: Cursor at start on line.
- Uses different handling since the selection does not actually change
in vline.
Release Notes:
- vim: Fixed insert before (`shift-i`) in visual modes.
Closes#10400
Closes https://github.com/zed-industries/zed/issues/17947
Changes:
- Let vim::increment find boolean values in the line and toggle them.
Release Notes:
- vim: Added support for toggling boolean values with `ctrl-a`/`ctrl-x`
Fixes two issues with the Vim exchange implementation:
1. The clear exchange implementation **didn't** clear the exchange. This
was due to us asking the editor to clear normal highlights instead of
background highlights.
2. Calling clear exchange also wouldn't cause the operator to be
cleared, so you would be left in operator = "cx".
I've added tests for both of these cases.
Partially closes#25750. It doesn't address the problem with dot repeat
not working for my custom bindings, but I don't know what would cause
that. I'd love to hear some thoughts on why that is. That might be a
problem on my part or it might be something with the code. Input would
be appreciated.
Release Notes:
- Fixed: Vim exchange's "clear exchange" function didn't clear the
exchange and kept you in operator pending mode.
This solves a couple of issues with Vim search by making the search
buffer and `SearchableItem` aware of the direction of the search. If
`SearchOptions::BACKWARDS` is set, all operations will be reversed. By
making `SearchableItem` aware of the direction, the correct active match
can be selected when searching backward.
Fixes#22506. This PR does not fix the last problem in that issue, but
that one is also tracked in #8049.
Release Notes:
- Fixes incorrect behavior of backward search in Vim mode
Closes#22999
# Problem
Currently, the default soft wrap mode of an editor is determined by
reading the language-specific settings of the language _at offset zero_
in the editor's (multi)buffer. While this provides a way to pick a
single soft wrap mode for a multi-language multibuffer, it's a bad
choice for a single-buffer multibuffer that begins with a different
embedded language. For example, Markdown with frontmatter:
```markdown
---
my_front_matter
---
# Hello World
```
Setting this in config:
```json
"languages": {
"Markdown": { "soft_wrap": "bounded" }
},
```
Will not soft wrap the Markdown file as the language at offset zero is
YAML.
# Solution
Instead of using the language at offset zero, use the language of the
first buffer in the multibuffer (the buffer at offset zero). This gives
better behavior for single-buffer editors, and a similar default for
multi-language multibuffers as before.
# Testing
All existing `editor` crate tests pass, but I would appreciate any
guidance for where best to add additional testing.
Release Notes:
- Fixed soft_wrap setting not applying to buffers starting with a
different language
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Closes#10167
This is take 2 on https://github.com/zed-industries/zed/pull/2341 which
was closed due to lack of migrator.
This PR contains rename of following keymap actions:
```sh
1. ["editor::GoToPrevHunk", { "center_cursor": true }] -> ["editor::GoToPreviousHunk", { "center_cursor": true }]
2. "editor::GoToPrevDiagnostic" -> "editor::GoToPreviousDiagnostic"
3. "editor::ContextMenuPrev" -> "editor::ContextMenuPrevious"
4. "search::SelectPrevMatch" -> "search::SelectPreviousMatch"
5. "file_finder::SelectPrev" -> "file_finder::SelectPrevious"
6. "menu::SelectPrev" -> "menu::SelectPrevious"
7. "editor::TabPrev" -> "editor::Backtab"
```
Release Notes:
- Renamed several keymap actions for consistency (e.g., `GoToPrevHunk` →
`GoToPreviousHunk`, `TabPrev` → `Backtab`). Your existing configured
keybindings will still work. You can click **"Backup and Update"** at
the top of your keymap file to easily update to the new actions.
Co-authored-by: Joseph T. Lyons <JosephTLyons@gmail.com>
Currently back quotes ``` `` ``` not recognized as an object in vim
mode, so ```c i ` ```, ```d i ` ``` not working.
It seems to be a typo introduced in #22632 : The`DoubleQuotes` line was
doubled while the `BackQuotes` line was missing.
Release Notes:
- vim: Fixed back quotes ``` `` ``` not recognized as object.
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
In file search submit action, handle unwrap when there are no prior
selection.
Fix is for recently made commits, hence no release notes.
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <anthony@zed.dev>
Closes#13881, and technically resolves#14927.
Release Notes:
- Added the ability to set the default Vim mode.
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Add support for `stop_at_indent` option for MoveToBeginningOfLine and SelectToBeginningOfLine instead of mixing that with `stop_at_soft_wraps`.
Add emacs mapping for `alt-m` (`back-to-indentation`)
Changes:
- [x] Cursor at the start during yank operations on objects (`yip`,
`yab` etc).
- [x] Refactors this: Trim all leading and trailing whitespace from
inner multiline bracket selection.
- This leaves a nicely indented line when doing `ci{` `vi{d` etc
- [x] Checks for empty selection
- [x] Removed moving cursor to the start in visual bracket operations
This cleans up the previous implementation by providing a simpler check
in `surrounding_markers`, instead of calling a new function in
`expand_object`. No functionality was changed there except for handling
the empty selection and removing some cursor adjustments that should not
have been there after further testing.
Release Notes:
- N/A
