This gets rid of the need to pass context to all cursor functions. In
practice context is always immutable when interacting with cursors.
A nicety of this is in the follow-up PR we will be able to implement
Iterator for all Cursors/filter cursors (hell, we may be able to get rid
of filter cursor altogether, as it is just a custom `filter` impl on
iterator trait).
Release Notes:
- N/A
This PR aims to improve the minimap performace. This is primarily
achieved by disabling/removing stuff that is not shown in the minimal as
well as by assuring the display map is not updated during minimap
prepaint.
This should already be much better in parts, as the block map as well as
the fold map will be less frequently updated due to the minimap
prepainting (optimally, they should never be, but I think we're not
quite there yet).
For this, I had to remove block rendering support for the minimap, which
is not as bad as it sounds: Practically, we were currently not rendering
most blocks anyway, there were issues due to this (e.g. scrolling any
visible block offscreen in the main editor causes scroll jumps
currently) and in the long run, the minimap will most likely need its
own block map or a different approach anyway. The existing
implementation caused resizes to occur very frequently for practically
no benefit. Can pull this out into a separate PR if requested, most
likely makes the other changes here easier to discuss.
This is WIP as we are still hitting some code path here we definitely
should not be hitting. E.g. there seems to be a rerender roughly every
second if the window is unfocused but visible which does not happen when
the minimap is disabled.
While this primarily focuses on the minimap, it also touches a few other
small parts not related to the minimap where I noticed we were doing too
much stuff during prepaint. Happy for any feedback there aswell.
Putting this up here already so we have a place to discuss the changes
early if needed.
Release Notes:
- Improved performance with the minimap enabled.
- Fixed an issue where interacting with blocks in the editor would
sometimes not properly work with the minimap enabled.
## Overview
This PR adds the minimap feature to the Zed editor, closely following
the [design from Visual Studio
Code](https://code.visualstudio.com/docs/getstarted/userinterface#_minimap).
When configured, a second instance of the editor will appear to the left
of the scrollbar. This instance is not interactive and it has a slimmed
down set of annotations, but it is otherwise just a zoomed-out version
of the main editor instance. A thumb shows the line boundaries of the
main viewport, as well as the progress through the document. Clicking on
a section of code in the minimap will jump the editor to that code.
Dragging the thumb will act like the scrollbar, moving sequentially
through the document.
## New settings
This adds a `minimap` section to the editor settings with the following
keys:
### `show`
When to show the minimap in the editor.
This setting can take three values:
1. Show the minimap if the editor's scrollbar is visible: `"auto"`
2. Always show the minimap: `"always"`
3. Never show the minimap: `"never"` (default)
### `thumb`
When to show the minimap thumb.
This setting can take two values:
1. Show the minimap thumb if the mouse is over the minimap: `"hover"`
2. Always show the minimap thumb: `"always"` (default)
### `width`
The width of the minimap in pixels.
Default: `100`
### `font_size`
The font size of the minimap in pixels.
Default: `2`
## Providing feedback
In order to keep the PR focused on development updates, please use the
discussion thread for feature suggestions and usability feedback: #26894
## Features left to add
- [x] fix scrolling performance
- [x] user settings for enable/disable, width, text size, etc.
- [x] show overview of visible lines in minimap
- [x] clicking on minimap should navigate to the corresponding section
of code
- ~[ ] more prominent highlighting in the minimap editor~
- ~[ ] override scrollbar auto setting to always when minimap is set to
always show~
Release Notes:
- Added minimap for high-level overview and quick navigation of editor
contents.
---------
Co-authored-by: MrSubidubi <dev@bahn.sh>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Release Notes:
- "Block" diagnostics (that show up in the diagnostics view, or when
using `f8`/`shift-f8`) are rendered more clearly
- `f8`/`shift-f8` now always go to the "next" or "prev" diagnostic,
regardless of the state of the editor
---------
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
Co-authored-by: Julia Ryan <juliaryan3.14@gmail.com>
A "Near" block acts similarly to a "Below" block, but can (if it's
height is <= one line height) be shown on the end of the preceding line
instead of adding an entire blank line to the editor.
You can test it out by pasting this into `go_to_diagnostic_impl` and
then press `F8`
```
let buffer = self.buffer.read(cx).snapshot(cx);
let selection = self.selections.newest_anchor();
self.display_map.update(cx, |display_map, cx| {
display_map.insert_blocks(
[BlockProperties {
placement: BlockPlacement::Near(selection.start),
height: Some(1),
style: BlockStyle::Flex,
render: Arc::new(|_| {
div()
.w(px(100.))
.h(px(16.))
.bg(gpui::hsla(0., 0., 1., 0.5))
.into_any_element()
}),
priority: 0,
}],
cx,
)
});
return;
```
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Previously, when comparing a block with an empty range to an empty query
range in non-inclusive mode, our binary search logic could end up
computing an inverted range, causing a panic.
This commit adds special casing when comparing empty blocks with empty
ranges.
cc @as-cii: I'm realizing that the approach to searching for the
intersecting replacement blocks makes some invalid assumptions about the
ordering of replace decorations. They aren't ordered at all by their end
range. @maxbrunsfeld and I are wondering if long term, we should remove
replace decorations and find another solution for folding buffers in
multi buffers.
Release Notes:
- Fixed an occasional panic that would occur when navigating to the next
change hunk with a pending inline transformation present.
Co-authored-by: Peter Tripp <petertripp@gmail.com>
Release Notes:
- Fixed a rendering bug that caused context in the agent to not wrap
properly.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Zed AI <ai+claude-3.7@zed.dev>
This PR adds functionality for loading the diff for an arbitrary git
commit, and displaying it in a tab. To retrieve the diff for the commit,
I'm using a single `git cat-file --batch` invocation to efficiently load
both the old and new versions of each file that was changed in the
commit.
Todo
* Features
* [x] Open the commit view when clicking the most recent commit message
in the commit panel
* [x] Open the commit view when clicking a SHA in a git blame column
* [x] Open the commit view when clicking a SHA in a commit tooltip
* [x] Make it work over RPC
* [x] Allow buffer search in commit view
* [x] Command palette action to open the commit for the current blame
line
* Styling
* [x] Add a header that shows the author, timestamp, and the full commit
message
* [x] Remove stage/unstage buttons in commit view
* [x] Truncate the commit message in the tab
* Bugs
* [x] Dedup commit tabs within a pane
* [x] Add a tooltip to the tab
Release Notes:
- Added the ability to show past commits in Zed. You can view the most
recent commit by clicking its message in the commit panel. And when
viewing a git blame, you can show any commit by clicking its sha.
Release Notes:
- Multibuffers now use less vertical space for excerpt boundaries.
Additionally the expand up/down arrows are hidden at the start and end
of the buffers
---------
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Zed AI <claude-3.5-sonnet@zed.dev>
Closes https://github.com/zed-industries/zed/issues/25377
Release Notes:
- Fixed a crash that could happen when typing in the assistant panel
with edit predictions enabled.
---------
Co-authored-by: Cole Miller <m@cole-miller.net>
This reverts commit 9ef0501853 due to a
panic.
```
{
"thread": "main",
"payload": "9 is not a valid char boundary in path \"crates/…/LiveKitBridge/\"",
"location_data": {
"file": "crates/file_finder/src/file_finder.rs",
"line": 646
}
}
```
Release Notes:
- N/A
This PR makes progress on #7711 by identifying any common prefix of the
paths in the file finder's search results, and replacing the "interior"
of that prefix---every path segment but the first and last---with `...`,
when a heuristic indicates that the longest path would otherwise
overflow the modal.
The elision is not applied to any segment that contains a match for the
search query.
There may be more work to do on #7711 in the case of long result paths
that do not share a significant common prefix.
Release Notes:
- Improved display of long paths in the file finder modal
Co-authored-by: Max <max@zed.dev>
Fix bugs caused by the window context PR, where the window could be on
the stack and is then requested from the App.
This PR also adds derive macros for `AppContext` and `VisualContext` so
that it's easy to define further contexts in API code, such as
`editor::BlockContext`.
Release Notes:
- N/A
There's still a bit more work to do on this, but this PR is compiling
(with warnings) after eliminating the key types. When the tasks below
are complete, this will be the new narrative for GPUI:
- `Entity<T>` - This replaces `View<T>`/`Model<T>`. It represents a unit
of state, and if `T` implements `Render`, then `Entity<T>` implements
`Element`.
- `&mut App` This replaces `AppContext` and represents the app.
- `&mut Context<T>` This replaces `ModelContext` and derefs to `App`. It
is provided by the framework when updating an entity.
- `&mut Window` Broken out of `&mut WindowContext` which no longer
exists. Every method that once took `&mut WindowContext` now takes `&mut
Window, &mut App` and every method that took `&mut ViewContext<T>` now
takes `&mut Window, &mut Context<T>`
Not pictured here are the two other failed attempts. It's been quite a
month!
Tasks:
- [x] Remove `View`, `ViewContext`, `WindowContext` and thread through
`Window`
- [x] [@cole-miller @mikayla-maki] Redraw window when entities change
- [x] [@cole-miller @mikayla-maki] Get examples and Zed running
- [x] [@cole-miller @mikayla-maki] Fix Zed rendering
- [x] [@mikayla-maki] Fix todo! macros and comments
- [x] Fix a bug where the editor would not be redrawn because of view
caching
- [x] remove publicness window.notify() and replace with
`AppContext::notify`
- [x] remove `observe_new_window_models`, replace with
`observe_new_models` with an optional window
- [x] Fix a bug where the project panel would not be redrawn because of
the wrong refresh() call being used
- [x] Fix the tests
- [x] Fix warnings by eliminating `Window` params or using `_`
- [x] Fix conflicts
- [x] Simplify generic code where possible
- [x] Rename types
- [ ] Update docs
### issues post merge
- [x] Issues switching between normal and insert mode
- [x] Assistant re-rendering failure
- [x] Vim test failures
- [x] Mac build issue
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Joseph <joseph@zed.dev>
Co-authored-by: max <max@zed.dev>
Co-authored-by: Michael Sloan <michael@zed.dev>
Co-authored-by: Mikayla Maki <mikaylamaki@Mikaylas-MacBook-Pro.local>
Co-authored-by: Mikayla <mikayla.c.maki@gmail.com>
Co-authored-by: joão <joao@zed.dev>
Closes#12553
* [x] Fix `diff_hunk_before`
* [x] Fix failure to show deleted text when expanding hunk w/ cursor on
second line of the hunk
* [x] Failure to expand diff hunk below the cursor.
* [x] Delete the whole file, and expand the diff. Backspace over the
deleted hunk, panic!
* [x] Go-to-line now counts the diff hunks, but it should not
* [x] backspace at the beginning of a deleted hunk deletes too much text
* [x] Indent guides are rendered incorrectly
* [ ] Fix randomized multi buffer tests
Maybe:
* [ ] Buffer search should include deleted text (in vim mode it turns
out I use `/x` all the time to jump to the next x I can see).
* [ ] vim: should refuse to switch into insert mode if selection is
fully within a diff.
* [ ] vim `o` command when cursor is on last line of deleted hunk.
* [ ] vim `shift-o` on first line of deleted hunk moves cursor but
doesn't insert line
* [x] `enter` at end of diff hunk inserts a new line but doesn't move
cursor
* [x] (`shift-enter` at start of diff hunk does nothing)
* [ ] Inserting a line just before an expanded hunk collapses it
Release Notes:
- Improved diff rendering, allowing you to navigate with your cursor
inside of deleted text in diff hunks.
---------
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Cole <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Michael <michael@zed.dev>
Co-authored-by: Agus <agus@zed.dev>
Co-authored-by: João <joao@zed.dev>
#23411 introduced an "Accept" callout for single line edits, but the
logic to detect them was incorrect causing it to trigger for multiline
insertions, this PR fixes that.
Release Notes:
- N/A
- [x] Rewrite worktree git handling
- [x] Fix tests
- [x] Fix `test_propagate_statuses_for_repos_under_project`
- [x] Replace `WorkDirectoryEntry` with `WorkDirectory` in
`RepositoryEntry`
- [x] Add a worktree event for capturing git status changes
- [x] Confirm that the local repositories are correctly updating the new
WorkDirectory field
- [x] Implement the git statuses query as a join when pulling entries
out of worktree
- [x] Use this new join to implement the project panel and outline
panel.
- [x] Synchronize git statuses over the wire for collab and remote dev
(use the existing `worktree_repository_statuses` table, adjust as
needed)
- [x] Only send changed statuses to collab
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.com>
Co-authored-by: Nathan <nathan@zed.dev>
Changes:
- [x] Increase expand affordance surface area
- [x] Ensure expand buttons have tooltips with keybindings
- [x] Make line numbers clickable to jump you to location (only in
multibuffers)
- [x] Hide the "Jump To File" element in not-focused excerpts
Before merging it:
- [x] Fix off-by-one header focus styles glitch
Improvements to consider for follow-up PRs:
1. Experiment with increasing the width of the clickable surface area
for line numbers
2. Don't show (or disable) the "expand excerpt" button when at the top
or bottom edge of the file
3. Once you jump to location, centralize the cursor scroll position
Release Notes:
- Improved multibuffer's "expand excerpt" affordance
- Fixed "jump to file/location" and "expand excerpt" keybinding display
- Made clicking on line numbers in multibuffers jump you to cursor
location in file
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Agus Zubiaga <agus@zed.dev>
Closes https://github.com/zed-industries/zed/issues/4925https://github.com/user-attachments/assets/e7b87375-893f-41ae-a2d9-d501499e40d1
Allows to fold any buffer inside multi buffers, either by clicking the
chevron icon on the header, or by using
`editor::Fold`/`editor::UnfoldLines`/`editor::ToggleFold`/`editor::FoldAll`
and `editor::UnfoldAll` actions inside the multi buffer (those were noop
there before).
Every fold has a fake line inside it, so it's possible to navigate into
that via the keyboard and unfold it with the corresponding editor
action.
The state is synchronized with the outline panel state: any fold inside
multi buffer folds the corresponding file entry; any file entry fold
inside the outline panel folds the corresponding buffer inside the multi
buffer, any directory fold inside the outline panel folds the
corresponding buffers inside the multi buffer for each nested file entry
in the panel.
Release Notes:
- Added a possibility to fold buffers inside multi buffers
---------
Co-authored-by: Antonio Scandurra <antonio@zed.dev>
Co-authored-by: Max Brunsfeld <max@zed.dev>
Co-authored-by: Cole Miller <cole@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Max <max@zed.dev>
This PR adds the ability for editor blocks to replace lines of text, but
does not yet use that feature anywhere. We'll update assistant patches
to use replace blocks on another branch:
https://github.com/zed-industries/zed/tree/assistant-patch-replace-blocks
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Richard Feldman <richard@zed.dev>
Co-authored-by: Marshall Bowers <marshall@zed.dev>
Co-authored-by: Nathan Sobo <nathan@zed.dev>
This simplifies rendering of excerpt headers and footers, and removes
the need to store a `BlockDisposition` on these boundary blocks. It's a
step toward implementing "replace blocks", which we want to use in the
assistant panel.
We've also cleaned up the way heights are specified for headers and
footers and fixed some visual asymmetries between the "expand upward"
and "expand downward" buttons.
Release Notes:
- N/A
---------
Co-authored-by: Richard <richard@zed.dev>
We are going to use this in the multi-buffer to produce a summary for an
`Excerpt` that contains a `Range<Anchor>`.
Release Notes:
- N/A
Co-authored-by: Nathan <nathan@zed.dev>
This PR removes the `replica_id` field from the `MultiBuffer` struct.
We were only ever referencing this field to pass when constructing a
`MultiBuffer`, and never used it outside of that.
Release Notes:
- N/A
This lets us provide a context when constructing the zero value. We need
it so we can require anchors to be associated with a buffer id, which
we're doing as part of simplifying the multibuffer API.
Release Notes:
- N/A
Co-authored-by: Nathan <nathan@zed.dev>
We've ran into performance issues when reinserting new blocks into the
assistant panel; in profiles WrapMap showed up, as we try to query wrap
boundaries over and over, which is a hidden O(n^2) - for each block, we
may potentially look at all of the Wraps. This PR alleviates this issue
by storing away previously resolved wrap range; consecutive iterations
can often reuse it.
This should help with performance of Assistant Panel with long
conversations.
Release Notes:
- Improved performance of assistant panel with large # of text.
Fixes#15923
Release Notes:
- Assistant workflow steps can now be applied and reverted directly from
within the assistant panel.
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Antonio <antonio@zed.dev>
We achieved this by allowing block decorations to have a height of `0`
and superimposing the border on top of the line, as opposed to carving
out space below it.
Release Notes:
- N/A
---------
Co-authored-by: Jason <jason@zed.dev>
Still TODO:
* [x] hide this UI unless you have some ssh projects in settings
* [x] add the "open folder" flow with the new open picker
* [ ] integrate with recent projects / workspace restoration
Release Notes:
- N/A
