This PR adds a failing test `test_staging_hunks_with_delayed_fs_event`
and makes it pass
Also skips a queued read for git diff states if another read was
requested (less work)
This still doesn't catch all race conditions, but the PR is getting long
so I'll yield this and start another branch
Release Notes:
- N/A
I thought it might be just `test_file_status` this time, but it seems to
be all four of the tests that we were previously seeing issues with.
Release Notes:
- N/A
This reduces the number of multibuffer syncs from 100,000 to 20,000.
Before this change each editor individually observed the project, so
literally any project change was amplified by the number of editors you
had open.
Now editors listen to their buffers instead of the project, and other
users of `cx.observe` on the project have been updated to use specific
events to reduce churn.
Follow up to #26237
Release Notes:
- Improved performance of Zed in large repos with lots of file system
events.
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Modified version of #25950. We still use worktree paths, but repo paths
with a status that lie outside the worktree are not excluded; instead,
we relativize them by adding `..`. This makes the list in the git panel
match what you'd get from running `git status` (with the repo's worktree
root as the working directory).
- [x] Implement + test new unrelativization logic
- [x] ~~When collecting repositories, dedup by .git abs path, so
worktrees can share a repo at the project level~~ dedup repos at the
repository selector layer, with repos coming from larger worktrees being
preferred
- [x] Open single-file worktree with diff when activating a path not in
the worktree
Release Notes:
- N/A
Attempt to fix an issue where conflicts from a cherry-pick don't get
cleared out of the git panel after being resolved.
Release Notes:
- Git Beta: Fixed resolution of conflicts from cherry-picks not being
reflected in the git panel
When a worktree is created, we walk up the ancestors of the root path
trying to find a git repository. In particular, if your `$HOME` is a git
repository and you open some subdirectory of `$HOME` that's *not* a git
repository, we end up scanning `$HOME` and everything under it looking
for changed and untracked files, which is often pretty slow. Consistency
here is not very useful and leads to a bad experience.
This PR adds a special case to not consider `$HOME` as a containing git
repository, unless you ask for it by doing the equivalent of `zed ~`.
Release Notes:
- Changed the behavior of git features to not treat `$HOME` as a git
repository unless opened directly
Done automatically with
> ast-grep -p '$A.background_executor().spawn($B)' -r
'$A.background_spawn($B)' --update-all --globs "\!crates/gpui"
Followed by:
* `cargo fmt`
* Unexpected need to remove some trailing whitespace.
* Manually adding imports of `gpui::{AppContext as _}` which provides
`background_spawn`
* Added `AppContext as _` to existing use of `AppContext`
Release Notes:
- N/A
Follow-up of https://github.com/zed-industries/zed/pull/24307
Brings back the PR and fixes the issue with the git status not
propagated, if computed too slow.
Now, git repo update
* waits in the background for all `scan_dir` repo status updates and
triggers another status update send afterwards
* ensures that the update sent is reported correctly (`scanning = true`)
if either FS or status scan is running still
* during worktree's git statuses updates, bumps `status_scan_id` to
ensure the repo update is reported to all subscribers
Release Notes:
- Improved project panel's speed in large projects
This PR adds the branch selector to the git panel and fixes a few bugs
in the repository selector.
Release Notes:
- N/A
---------
Co-authored-by: ConradIrwin <conrad.irwin@gmail.com>
Co-authored-by: Conrad <conrad@zed.dev>
In the Windows test environment, the paths generated by `temp_tree()`
are symlink paths, which causes certain tests to fail.
I later noticed that when opening a project, we seem to always use
`canonicalize` to normalize the paths, as shown here:
https://github.com/zed-industries/zed/pull/21039.
This PR adopts a similar approach for the test environment to address
the issue.
Release Notes:
- N/A
There's still a bit more work to do on this, but this PR is compiling
(with warnings) after eliminating the key types. When the tasks below
are complete, this will be the new narrative for GPUI:
- `Entity<T>` - This replaces `View<T>`/`Model<T>`. It represents a unit
of state, and if `T` implements `Render`, then `Entity<T>` implements
`Element`.
- `&mut App` This replaces `AppContext` and represents the app.
- `&mut Context<T>` This replaces `ModelContext` and derefs to `App`. It
is provided by the framework when updating an entity.
- `&mut Window` Broken out of `&mut WindowContext` which no longer
exists. Every method that once took `&mut WindowContext` now takes `&mut
Window, &mut App` and every method that took `&mut ViewContext<T>` now
takes `&mut Window, &mut Context<T>`
Not pictured here are the two other failed attempts. It's been quite a
month!
Tasks:
- [x] Remove `View`, `ViewContext`, `WindowContext` and thread through
`Window`
- [x] [@cole-miller @mikayla-maki] Redraw window when entities change
- [x] [@cole-miller @mikayla-maki] Get examples and Zed running
- [x] [@cole-miller @mikayla-maki] Fix Zed rendering
- [x] [@mikayla-maki] Fix todo! macros and comments
- [x] Fix a bug where the editor would not be redrawn because of view
caching
- [x] remove publicness window.notify() and replace with
`AppContext::notify`
- [x] remove `observe_new_window_models`, replace with
`observe_new_models` with an optional window
- [x] Fix a bug where the project panel would not be redrawn because of
the wrong refresh() call being used
- [x] Fix the tests
- [x] Fix warnings by eliminating `Window` params or using `_`
- [x] Fix conflicts
- [x] Simplify generic code where possible
- [x] Rename types
- [ ] Update docs
### issues post merge
- [x] Issues switching between normal and insert mode
- [x] Assistant re-rendering failure
- [x] Vim test failures
- [x] Mac build issue
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Joseph <joseph@zed.dev>
Co-authored-by: max <max@zed.dev>
Co-authored-by: Michael Sloan <michael@zed.dev>
Co-authored-by: Mikayla Maki <mikaylamaki@Mikaylas-MacBook-Pro.local>
Co-authored-by: Mikayla <mikayla.c.maki@gmail.com>
Co-authored-by: joão <joao@zed.dev>
When a file exists in HEAD, is deleted in the index, and exists again in
the working copy, git produces two lines for it, one reading `D `
(deleted in index, unmodified in working copy), and the other reading
`??` (untracked). Merge these two into the equivalent of `DA`.
Release Notes:
- Improved handling of files that are deleted in the git index but exist
in HEAD and the working copy
- [x] Basic implementation
- [x] Disable commit buttons when committing is not possible (empty
message, no changes)
- [x] Upgrade GitSummary to efficiently figure out whether there are any
staged changes
- [x] Make CommitAll work
- [x] Surface errors with toasts
- [x] Channel shutdown
- [x] Empty commit message or no changes
- [x] Failed git operations
- [x] Fix added files no longer appearing correctly in the project panel
(GitSummary breakage)
- [x] Fix handling of commit message
Release Notes:
- N/A
---------
Co-authored-by: Nate <nate@zed.dev>
To prepare for the introduction of folding in the git panel, these
codepaths need to work with the canonical source of all git status
entries, not just the ones that are visible in the panel.
Release Notes:
- N/A
---------
Co-authored-by: Nate <nate@zed.dev>
First, parse the output of `git status --porcelain=v1` into a
representation that can handle the full "grammar" and doesn't lose
information.
Second, as part of pushing this throughout the codebase, expand the use
of the existing `GitSummary` type to all the places where status
propagation is in play (i.e., anywhere we're dealing with a mix of files
and directories), and get rid of the previous `GitSummary ->
GitFileStatus` conversion.
- [x] Synchronize new representation over collab
- [x] Update zed.proto
- [x] Update DB models
- [x] Update `GitSummary` and summarization for the new `FileStatus`
- [x] Fix all tests
- [x] worktree
- [x] collab
- [x] Clean up `FILE_*` constants
- [x] New collab tests to exercise syncing of complex statuses
- [x] Run it locally and make sure it looks good
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
TODO:
- [ ] Investigate incorrect hit target for `stage all` button
- [ ] Add top level context menu
- [ ] Add entry context menus
- [x] Show paths in list view
- [ ] For now, `enter` can just open the file
- [ ] 🐞: Hover deadzone in list caused by scrollbar
- [x] 🐞: Incorrect status/nothing shown when multiple worktrees are
added
---
This PR continues work on the feature flagged git panel.
Changes:
- Defines and wires up git panel actions & keybindings
- Re-scopes some actions from `git_ui` -> `git`.
- General git actions (StageAll, CommitChanges, ...) are scoped to
`git`.
- Git panel specific actions (Close, FocusCommitEditor, ...) are scoped
to `git_panel.
- Staging actions & UI are now connected to git!
- Unify more reusable git status into the GitState global over being
tied to the panel directly.
- Uses the new git status codepaths instead of filtering all workspace
entries
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <53574922+cole-miller@users.noreply.github.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Closes#22659
More context can be found in attached issue.
This is specific to Windows:
1. Add parent directory watching for fs watch when the file doesn't
exist. For example, when Zed is first launched and `settings.json` isn't
there.
2. Add proper symlink handling for fs watch. For example, when
`settings.json` is a symlink.
This is exactly same as how we handle it on Linux.
Release Notes:
- Fixed an issue where items on the Welcome page could not be toggled on
Windows, either on first launch or when `settings.json` is a symlink.
- [x] Rewrite worktree git handling
- [x] Fix tests
- [x] Fix `test_propagate_statuses_for_repos_under_project`
- [x] Replace `WorkDirectoryEntry` with `WorkDirectory` in
`RepositoryEntry`
- [x] Add a worktree event for capturing git status changes
- [x] Confirm that the local repositories are correctly updating the new
WorkDirectory field
- [x] Implement the git statuses query as a join when pulling entries
out of worktree
- [x] Use this new join to implement the project panel and outline
panel.
- [x] Synchronize git statuses over the wire for collab and remote dev
(use the existing `worktree_repository_statuses` table, adjust as
needed)
- [x] Only send changed statuses to collab
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.com>
Co-authored-by: Nathan <nathan@zed.dev>
Closes#4745
Release Notes:
- Added a new `file_scan_inclusions` setting to force Zed to index files
that match the provided globs, even if they're gitignored.
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This adds support for [git
worktrees](https://matklad.github.io/2024/07/25/git-worktrees.html). It
fixes the errors that show up (git blame not working) and actually adds
support for detecting git changes in a `.git` folder that's outside of
our path (and not even in the ancestor chain of our root path).
(While working on this we discovered that our `.gitignore` handling is
not 100% correct. For example: we do stop processing `.gitignore` files
once we found a `.git` repository and don't go further up the ancestors,
which is correct, but then we also don't take into account the
`excludesFile` that a user might have configured, see:
https://git-scm.com/docs/gitignore)
Closes https://github.com/zed-industries/zed/issues/19842
Closes https://github.com/zed-industries/zed/issues/4670
Release Notes:
- Added support for git worktrees. Zed can now open git worktrees and
the git status in them is correctly handled.
---------
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Bennet <bennet@zed.dev>
This PR is an internal refactor in preparation for remote editing. It
restructures the public interface of `Worktree`, reducing the number of
call sites that assume that a worktree is local or remote.
* The Project no longer calls `worktree.as_local_mut().unwrap()` in code
paths related to basic file operations
* Fewer code paths in the app rely on the worktree's `LocalSnapshot`
* Worktree-related RPC message handling is more fully encapsulated by
the `Worktree` type.
to do:
* [x] file manipulation operations
* [x] sending worktree updates when sharing
for later
* opening buffers
* updating open buffers upon worktree changes
Release Notes:
- N/A
The `worktree` crate mainly provides an in-memory model of a directory
and its git repositories. But because it was originally extracted from
the Project crate, it also contained lingering bits of code that were
outside of that area:
* it had a little bit of logic related to buffers (though most buffer
management lives in `project`)
* it had a *little* bit of logic for storing diagnostics (though the
vast majority of LSP and diagnostic logic lives in `project`)
* it had a little bit of logic for sending RPC message (though the
*receiving* logic for those RPC messages lived in `project`)
In this PR, I've moved those concerns entirely to the project crate
(where they were already dealt with for the most part), so that the
worktree crate can be more focused on its main job, and have fewer
dependencies.
Worktree no longer depends on `client` or `lsp`. It still depends on
`language`, but only because of `impl language::File for
worktree::File`.
Release Notes:
- N/A
Fixes https://github.com/zed-industries/zed/issues/10890
* removes `unwrap()` that caused panics for text elements with no text,
remaining after edit state is cleared but project entries are not
updated, having the fake, "new entry"
* improves discoverability of the FS errors during file/directory
creation: now those are shown as workspace notifications
* stops printing anyhow backtraces in workspace notifications, printing
the more readable chain of contexts instead
* better indicates when new entries are created as excluded ones
Release Notes:
- Improve excluded entry creation workflow in the project panel
([10890](https://github.com/zed-industries/zed/issues/10890))
Fixes https://github.com/zed-industries/zed/issues/9575
Fixes https://github.com/zed-industries/zed/issues/4294
### Problem
When a large git repository's `.git` folder changes (due to a `git
commit`, `git reset` etc), Zed needs to recompute the git status for
every file in that git repository. Part of computing the git status is
the *unstaged* part - the comparison between the content of the file and
the version in the git index. In a large git repository like `chromium`
or `linux`, this is inherently pretty slow.
Previously, we performed this git status all at once, and held a lock on
our `BackgroundScanner`'s state for the entire time. On my laptop, in
the `linux` repo, this would often take around 13 seconds.
When opening a file, Zed always refreshes the metadata for that file in
its in-memory snapshot of worktree. This is normally very fast, but if
another task is holding a lock on the `BackgroundScanner`, it blocks.
### Solution
I've restructured how Zed handles Git statuses, so that when a git
repository is updated, we recompute files' git statuses in fixed-sized
batches. In between these batches, the `BackgroundScanner` is free to
perform other work, so that file operations coming from the main thread
will still be responsive.
Release Notes:
- Fixed a bug that caused long delays in opening files right after
performing a commit in very large git repositories.
TODO:
- [x] Don't immediately seg fault
- [x] Implement for directories
- [x] Add cmd-delete to remove files
- [ ] ~~Add setting for trash vs. delete~~ You can just use keybindings
to change the behavior.
fixes https://github.com/zed-industries/zed/issues/7228
fixes https://github.com/zed-industries/zed/issues/5094
Release Notes:
- Added a new `project_panel::Trash` action and changed the default
behavior for `backspace` and `delete` in the project panel to send a
file to the systems trash, instead of permanently deleting it
([#7228](https://github.com/zed-industries/zed/issues/7228),
[#5094](https://github.com/zed-industries/zed/issues/5094)). The
original behavior can be restored by adding the following section to
your keybindings:
```json5
[
// ...Other keybindings...
{
"context": "ProjectPanel",
"bindings": {
"backspace": "project_panel::Delete",
"delete": "project_panel::Delete",
}
}
]
