- [x] Rewrite worktree git handling
- [x] Fix tests
- [x] Fix `test_propagate_statuses_for_repos_under_project`
- [x] Replace `WorkDirectoryEntry` with `WorkDirectory` in
`RepositoryEntry`
- [x] Add a worktree event for capturing git status changes
- [x] Confirm that the local repositories are correctly updating the new
WorkDirectory field
- [x] Implement the git statuses query as a join when pulling entries
out of worktree
- [x] Use this new join to implement the project panel and outline
panel.
- [x] Synchronize git statuses over the wire for collab and remote dev
(use the existing `worktree_repository_statuses` table, adjust as
needed)
- [x] Only send changed statuses to collab
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.com>
Co-authored-by: Nathan <nathan@zed.dev>
Closes#22607
Symlinks can be absolute or relative. When using
[stow](https://www.gnu.org/software/stow/) to manage dotfiles, it
creates relative symlinks to the target files.
For example:
- Original file: `/home/tims/dotfiles/zed/setting.json`
- Symlink path: `/home/tims/.config/zed/setting.json`
- Target path (relative to symlink): `../../dotfiles/zed/setting.json`
The issue is that you can’t watch the symlink path because it’s relative
and doesn't include the base path it is relative to. This PR fixes that
by converting relative symlink paths to absolute paths.
- Absolute path (after parent join):
`/home/tims/.config/zed/../../dotfiles/zed/setting.json` (This works)
- Canonicalized path (from absolute path):
`/home/tims/dotfiles/zed/setting.json` (This works too, just more
cleaner)
Release Notes:
- Fix issue where items on the Welcome page could not be toggled on
Linux when using Stow to manage dotfiles
Closes#22326
This PR adds process PID information to window created by X11, so that
window manager can identify which process this window belongs to.
Without this property, the window manager would have no reliable way to
know which process created this window.
In original issue, `robotgo` throws error on `x, y, w, h :=
robotgo.GetBounds(pid)` this method. If we go deeper into the source
code of `robotgo`, it calls `GetXidFromPid` which goes through all
windows, and tries to check for provided pid. Hence, when it tries to do
that for Zed, it fails and returns `0, err` to caller.
```go
// Robotgo source code trying to look through all windows and query pid
// GetXidFromPid get the xid from pid
func GetXidFromPid(xu *xgbutil.XUtil, pid int) (xproto.Window, error) {
windows, err := ewmh.ClientListGet(xu)
if err != nil {
return 0, err
}
for _, window := range windows {
wmPid, err := ewmh.WmPidGet(xu, window)
if err != nil {
return 0, err
}
if uint(pid) == wmPid {
return window, nil
}
}
return 0, errors.New("failed to find a window with a matching pid.")
}
```
Querying for pid for active Zed window:
Before:
```sh
tims@lemon ~/w/go-repro [127]> xprop -root _NET_ACTIVE_WINDOW
_NET_ACTIVE_WINDOW(WINDOW): window id # 0x4e00002
tims@lemon ~/w/go-repro> xprop -id 0x4e00002 _NET_WM_PID
_NET_WM_PID: not found.
```
After:
```sh
tims@lemon ~/w/go-repro> xprop -root _NET_ACTIVE_WINDOW
_NET_ACTIVE_WINDOW(WINDOW): window id # 0x4e00002
tims@lemon ~/w/go-repro> xprop -id 0x4e00002 _NET_WM_PID
_NET_WM_PID(CARDINAL) = 103548
tims@lemon ~/w/go-repro>
```
Correct zed process PID (below) assosiated with zed window (shown
above):
Release Notes:
- Fix `robotgo` failing when Zed window is open on Linux
Closes#22578
Currently, the `hovered` boolean in the window state is only updated by
the `WM_MOUSELEAVE` event, which fires when the mouse cursor leaves the
window's working area. This means that when the user moves the cursor
from the window to the title bar, `hovered` is set to `false`. Later in
the code, this flag is used to determine the cursor style and check if
the cursor is over the correct window.
The `hovered` boolean should remain active even when the mouse is over
non-client items, such as the title bar or window borders. This PR fixes
that by using `WM_NCMOUSELEAVE` event, which is triggered when the mouse
leaves non-client items. This event is used to update the `hovered`
boolean accordingly.
Now, `hovered` is `true` when the mouse is over the window's working
area, as well as non-client areas like the title bar.
More context:
- Existing: `dwFlags: TME_LEAVE` tracks window area mouse leaves, which
is used in `handle_mouse_move_msg` func.
- New: `dwFlags: TME_LEAVE | TME_NONCLIENT` tracks non-client mouse
leaves, which is used in `handle_nc_mouse_move_msg` func.
Preview:
https://github.com/user-attachments/assets/b319303f-81b9-45cb-bf0c-535a59b96561
Release Notes:
- Fix cursor style not changing on hover over items in the title bar on
Windows
Release Notes:
- Added the ability to specify additional beta headers for custom
Anthropic models.
---------
Co-authored-by: David Soria Parra <167242713+dsp-ant@users.noreply.github.com>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Closes #ISSUE
- #21452
Describe the bug / provide steps to reproduce it
Language server error: pylsp
failed to spawn command. path:
"C:\Users\AppData\Local\Zed\languages\pylsp\pylsp-venv\bin\pylsp",
working directory: "D:\Coding\Python", args: []
-- stderr--
Environment
- Windows 11
- python
Release Notes:
- Windows: Fixed the path building used to run `pip` commands in the
venv generated on Windows 11.
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Removed a settings update that should have been removed in the 0.148.0
release.
I am not sure if there is a tracking issue, but I identified this check
for outdated settings that should not be needed anymore. I investigated
a bit and did not find any conflicts or UB as a result of removing this
code.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This PR fixes an issue introduced in #21939 where the list of models in
the language model selector could be outdated.
Since we're no longer recreating the picker each render, we now need to
make sure we are updating the list of models accordingly when there are
changes to the language model providers.
I noticed it specifically in Assistant1.
Release Notes:
- Fixed a staleness issue with the language model selector.
This PR updates the `push_div` method in the `MarkdownElementBuilder` to
support taking in a `Stateful<Div>`.
This is some groundwork for supporting horizontal scrolling in Markdown
code blocks.
Release Notes:
- N/A
Closes#19837
This PR is a continuation of [linux: Implement
Menus](https://github.com/zed-industries/zed/pull/21873) and should only
be reviewed once the existing PR is merged.
I created this as a separate PR as the existing PR was already reviewed
but is yet to merge, and also it was my initial plan to do it in
separate parts because of the scope of it. This will also help reviewing
code faster.
This PR adds two new types of keyboard shortcuts to make menu navigation
easier:
1. `Alt + Z` for Zed, `Alt + F` for File, `Alt + S` for Selection, and
so on to open a specific menu with this combination. This mimics VSCode
and IntelliJ.
2. `Arrow Left/Right` when any menu is open. This will trigger the
current menu to close, and the previous/next to open respectively. First
and last element cycling is handled.
`Arrow Up/Down` to navigate menu entries is already there in existing
work.
https://github.com/user-attachments/assets/976aea48-4e20-4c19-850d-4d205a4bead2
Release Notes:
- Added keyboard navigation for menus on Linux (left/right). If you wish
to open menus with keyboard shortcuts add the following to your user
keymap:
```json
{
"context": "Workspace",
"bindings": {
"alt-z": ["app_menu::OpenApplicationMenu", "Zed"],
"alt-f": ["app_menu::OpenApplicationMenu", "File"],
"alt-e": ["app_menu::OpenApplicationMenu", "Edit"],
"alt-s": ["app_menu::OpenApplicationMenu", "Selection"],
"alt-v": ["app_menu::OpenApplicationMenu", "View"],
"alt-g": ["app_menu::OpenApplicationMenu", "Go"],
"alt-w": ["app_menu::OpenApplicationMenu", "Window"],
"alt-h": ["app_menu::OpenApplicationMenu", "Help"]
}
}
```
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
This PR adds another example thread to showcase a response with long
lines of code.
This example will be helpful when working to make the code blocks scroll
horizontally instead of wrapping.
Release Notes:
- N/A
Clicking buffer headers and line numbers would sometimes take you to a
disorienting scroll position. This PR improves that so the destination
line is roughly at the same Y position as it appeared in the
multibuffer.
https://github.com/user-attachments/assets/3ad71537-cf26-4136-948f-c5a96df57178
**Note**: The alignment won't always be perfect because the multibuffer
and target buffer might start at a different absolute Y position
(because of open search, breadcrumbs, etc). I wanted to compensate for
that, but that requires a fundamental change that I'd prefer to make
separately.
Release Notes:
- Fix vertical alignment when jumping from multibuffers
This PR is a follow-up to #22200 that makes it so the chat panel icon is
visible when the chat panel is active, even if not in a call (when using
the `when_in_call` setting).
Release Notes:
- N/A
* Skip walking string for truncate when byte len is <= char limit
* Fix `truncate_and_remove_front` returning string that is `max_chars +
1` in length. Now more consistent with `truncate_and_trailoff` behavior.
* Fix `truncate_and_remove_front` adding ellipsis when max_chars == char
length
Release Notes:
- N/A
Closes#19974.
When a file is pasted in the project panel at a location where a file
with that name already exists, the new file's name is disambiguated by
appending " copy" at the end. This happens on the paste and the
duplicate actions, as well as when Alt-dragging files.
With this PR, this will now open the file rename editor with the
disambiguator pre-selected.
Open question:
With this PR's current implementation, this won't always work when
pasting multiple files at once. In this case, the file rename editor
only opens for the last pasted file, if that file was disambiguated. If
only other files were disambiguated instead, it won't open.
This roughly mimics the previous paste behaviour, namely that only the
last pasted file was selected.
I see two options here: If multiple files were pasted and some of them
were disambiguated, we could select and open the rename editor for the
last file that was actually disambiguated (easy), or we could open a
kind of multi-editor for all files (hard, but maybe a multi-rename
editor could actually be interesting in general...).
Release Notes:
- Open rename file editor if pasted file was disambiguated
Closes#10325
Release Notes:
- Fixed an issue inside the integrated terminal where clicking on URLs
that started with `file://` would sometimes not work when the path
included a line number (e.g. `file:///Users/someuser/lorem.txt:221:22`)
This PR updates the scrollbar diagnostic setting to provide fine-grained
control over which indicators to show, based on severity level. This
allows the user to hide lower-severity diagnostics that can otherwise
clutter the scrollbar (for example, unused or disabled code).
The options are set such that the existing boolean setting has the same
effect: when `true` all diagnostics are shown, and when `false` no
diagnostics are shown.
Closes#22296.
Release Notes:
- Added fine-grained control of scrollbar diagnostic indicators.
This commit is all about strings, not about line layout at all. When
laying out text, we use a line layout cache to avoid roundtrips to
system layout engine where possible. This makes it so that we might end
up not needing an owned version of text to insert into the cache, as we
might get a cached version.
The API boundary of line layout accepted text to be laid out as &str. It
then performed cache lookup (which didn't require having an owned
version) and only resorted to making an owned version when needed. As it
turned out though, exact cache hits are quite rare and we end up needing
owned version more often than not. The callers of line layout either
dealt with SharedStrings or owned Strings. Due to coercing them into
&str, we were ~always copying text into a new string (unless there was a
same-frame-hit). This is a bit wasteful, thus this PR generifies the API
a bit to make it easier to reuse existing string allocations if there
are any.
Benchmark scenario: scrolling down page-by-page through editor_tests (I
ran the same scenario twice):
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/21657
Follow-up of https://github.com/zed-industries/zed/pull/22488
Previous PR broke git blame tooltips, which are expected to be open when
hovered, even if the mouse cursor is moved away from the actual blame
entry that caused the tooltip to appear.
Current version moves the invalidation logic into `prepaint_tooltip`,
where the new data about the tooltip origin is used to ensure we
invalidate only tooltips that have no mouse cursor in either origin
bounds or tooltip bounds (if it's hoverable).
Release Notes:
- Fixed tooltips getting stuck
This reverts commit 344284e013.
That change broke git blame tooltips, as Zed should also show tooltips
which are hovered, even though the mouse had left the origin element's
bounds.
Release Notes:
- N/A
This pull request includes a small change to the
`crates/languages/src/markdown/config.toml` file. The change adds block
comment syntax for Markdown files.
*
[`crates/languages/src/markdown/config.toml`](diffhunk://#diff-4cf73d9af0f11f2ac8929bd8113ee76aa382dc96a731f18510c09fc3d0db1f9cR5):
Added block comment syntax `<!-- ` and ` -->` for Markdown files.
Closes https://github.com/zed-industries/zed/issues/19797
I have been testing it with the following:
1. create a simple markdown file containing following words
```markdown
good morning - English
Dzień dobry - polish
おはよう - japanese
صباح الخير - arabic
早安 - Chineses (Traditional)
```
2. comment using `cmd+/` and see if there are any errors
Release Notes:
- Added block comment syntax `<!-- ` and ` -->` for Markdown files.
Closes https://github.com/zed-industries/zed/issues/22469 — and, aside
from fixing that issue also took the opportunity to make the
`file_search` icon dimensions feel better in comparison the other icons
in the Project Search area.
Release Notes:
- N/A
For both the strings and paths multithreaded matching it would still
aggregate the response even though it is unneeded. It now checks cancel.
In the paths matcher, cancel is now checked within the loop, since it
was calling `match_candidates` even though no further results would be
computed.
Release Notes:
- N/A
* Removes `max_results` from the matcher interface as this is better
dealt with in consumers once all results are known. The current
implementation was quite inefficient as it was using binary search to
find insertion points and then doing an insert which copies the entire
suffix each time.
* There was a corner case where if the binary search found a match
candidate with the same score, it was dropped. Now fixed.
* Uses of `util::extend_sorted` when merging results from worker threads
also repeatedly uses binary search and insertion which copies the entire
suffix. A followup will remove that and its usage.
* Adds `util::truncate_to_bottom_n_sorted_by` which uses quickselect +
sort to efficiently get a sorted count limited result.
* Improves interface of Matcher::match_candidates by providing the match
positions to the build function. This allows for removal of the `Match`
trait. It also fixes a bug where the Match's own Ord wasn't being used,
which seems relevant to PathMatch for cases where scores are the same.
Release Notes:
- N/A
Part of https://github.com/zed-industries/zed/issues/22415
I've noticed that I cannot work with any Zig projects, as there were no
"go to definition", formatting and inlay hints.
After debugging, I've discovered that `typos` was registered as a first
language server, becoming the "primary" one for Zig.
That one does not have any proper capabilities, hence all corresponding
LSP requests were no-op.
While this solution is not ideal (I wonder, how many other set-ups are
broken due to the same thing?), we'd better fix things for now this way
at least.
Release Notes:
- Fixed `zls` not working properly when `typos` extension is installed
When switching from just running the editor directly to using the CLI I
missed the logs in the terminal and started using `--foreground`. I
realized this was because there was a tiny amount of effort involved in
finding out where logs were being written to. Having the cli output it
to stderr helps make this more visible.
Seems like such a minor thing not listing in release notes.
Release Notes:
- N/A
This means that `workspace::ToggleRightDock` will open the assistant if
no right-dock panel has been manually activated, instead of the chat as
before. Also cleans up the `active_panel_index` logic a bit.
cc @nathansobo
Release Notes:
- Make `workspace::ToggleRightDock` open the assistant panel if no
right-dock panel has yet been activated
Changes:
- [x] Increase expand affordance surface area
- [x] Ensure expand buttons have tooltips with keybindings
- [x] Make line numbers clickable to jump you to location (only in
multibuffers)
- [x] Hide the "Jump To File" element in not-focused excerpts
Before merging it:
- [x] Fix off-by-one header focus styles glitch
Improvements to consider for follow-up PRs:
1. Experiment with increasing the width of the clickable surface area
for line numbers
2. Don't show (or disable) the "expand excerpt" button when at the top
or bottom edge of the file
3. Once you jump to location, centralize the cursor scroll position
Release Notes:
- Improved multibuffer's "expand excerpt" affordance
- Fixed "jump to file/location" and "expand excerpt" keybinding display
- Made clicking on line numbers in multibuffers jump you to cursor
location in file
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Agus Zubiaga <agus@zed.dev>
This slashes our incremental dev times (touch editor) by 0.6s
(8.1->7.6s) due to unblocking terminal_view build sooner.
Closes #ISSUE
Release Notes:
- N/A
