Cleans things up now that wasm32-wasip2 is a supported target.
Before we merge, I will need to test against the current extensions to
make sure this is fine.
However, since our wit world isn't using any wasi package imports, this
shouldn't be a breaking change.
Release Notes:
- N/A
https://github.com/zed-industries/zed/issues/30972 brought up another
case where our context is not enough to track the actual source of the
issue: we get a general top-level error without inner error.
The reason for this was `.ok_or_else(|| anyhow!("failed to read HEAD
SHA"))?; ` on the top level.
The PR finally reworks the way we use anyhow to reduce such issues (or
at least make it simpler to bubble them up later in a fix).
On top of that, uses a few more anyhow methods for better readability.
* `.ok_or_else(|| anyhow!("..."))`, `map_err` and other similar error
conversion/option reporting cases are replaced with `context` and
`with_context` calls
* in addition to that, various `anyhow!("failed to do ...")` are
stripped with `.context("Doing ...")` messages instead to remove the
parasitic `failed to` text
* `anyhow::ensure!` is used instead of `if ... { return Err(...); }`
calls
* `anyhow::bail!` is used instead of `return Err(anyhow!(...));`
Release Notes:
- N/A
Precursor to other optimizations, but this already gets us a big
improvement.
Wasm compilation can easily be parallelized, and with all of the cores
on my M4 Max this already gets us an 86% improvement, bringing loading
an extension down to <9ms.
Not all setups will see this much improvement, but it will use the cores
available (it just uses rayon under the hood like we do elsewhere).
Since we load extensions in sequence, this should have a nice impact for
users with a lot of extensions.
#### Before
```
Benchmarking load: Warming up for 3.0000 s
Warning: Unable to complete 100 samples in 5.0s. You may wish to increase target time to 6.5s, or reduce sample count to 70.
load time: [64.859 ms 64.935 ms 65.027 ms]
Found 8 outliers among 100 measurements (8.00%)
2 (2.00%) low mild
3 (3.00%) high mild
3 (3.00%) high severe
```
#### After
```
load time: [8.8685 ms 8.9012 ms 8.9344 ms]
change: [-86.347% -86.292% -86.237%] (p = 0.00 < 0.05)
Performance has improved.
Found 2 outliers among 100 measurements (2.00%)
2 (2.00%) high mild
```
Release Notes:
- N/A
Replace dynamic downloading of WASI adapter with the provided crate.
More importantly, this makes sure we are using the same adapter version
as our version of wasmtime, which includes several fixes.
Arguably we could also at this point update to wasm32-wasip2 target and
remove this dependency as well if we want, but that might need further
testing.
Release Notes:
- N/A
This PR updates the snake_case check for grammar names to use `heck`
instead of `convert_case`.
`heck` correctly handles values like `d2`.
Fixes https://github.com/zed-industries/zed/issues/28583.
Release Notes:
- Updated snake_case check for grammar names in extensions.
This bumps `wasi-sdk` to version 25 and adds target architecture
conditionals.
Closes#18492
Release Notes:
- Fixed compiling dev extensions with Tree-sitter grammars on Linux
aarch64.
This PR updates the `ExtensionBuilder` to require that grammar names are
written in snake_case.
The grammar names are used to construct identifiers, so we need them to
be valid C identifiers.
Release Notes:
- N/A
This PR adds the supporting infrastructure to support loading icon
themes defined by extensions.
Here's an example icon theme:
```json
{
"name": "My Icon Theme",
"author": "Me <me@example.com>",
"themes": [
{
"name": "My Icon Theme",
"appearance": "dark",
"file_icons": {
"gleam": { "path": "./icons/file_type_gleam.svg" },
"toml": { "path": "./icons/file_type_toml.svg" }
}
}
]
}
```
The icon paths are resolved relative to the root of the extension
directory.
Release Notes:
- N/A
This contains the main changes to the extensions crate from #20049. The
primary goal here is removing dependencies that we can't include on the
remote.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Marshall <marshall@zed.dev>
This PR adds a new `extension` crate, containing some contents extracted
from the `extension_host`.
Right now it contains just the `ExtensionManifest` and
`ExtensionBuilder`, although we may move more of the extension interface
into here.
The introduction of the `extension` crate allows us to depend on it in
the `extension_cli`, thereby eliminating the need for the `no-webrtc`
feature on a number of crates.
Release Notes:
- N/A
This PR renames the `extension` crate to `extension_host`.
This is to free up the name so that we can create a smaller-scoped
`extension` crate.
Release Notes:
- N/A
REplace isahc with ureq everywhere gpui is used.
This should allow us to make http requests without libssl; and avoid a
long-tail of panics caused by ishac.
Release Notes:
- (potentially breaking change) updated our http client
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Fixes https://github.com/zed-industries/zed/issues/5291
Release Notes:
- Fixed a bug where the 'toggle comments' command didn't use the right
comment syntax in JSX and TSX elements.
---------
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
This helps debug what steps are taken and where
the compiled extension ended up.
Also remove duplicate "compiling Rust extension" / "compiling rust
extension" text - it's confusing.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
For now extensions can only register global snippets, but there'll be
follow-up work to support scope attribute in snippets.json.
Release Notes:
- Extensions can now provide snippets by including `snippets.json` file
next to the extension manifest.
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Adding `proxy` keyword to configure proxy while using zed. After setting
the proxy, restart Zed to acctually use the proxy.
Example setting:
```rust
"proxy" = "socks5://localhost:10808"
"proxy" = "http://127.0.0.1:10809"
```
Closes#9424, closes#9422, closes#8650, closes#5032, closes#6701,
closes#11890
Release Notes:
- Added settings to configure proxy in Zed
---------
Co-authored-by: Jason Lee <huacnlee@gmail.com>
This PR extends the extension builder—and by extension, the
`zed-extension` CLI—with support for building a Tree-sitter grammar at a
given path within the grammar repository.
Some Tree-sitter grammar repos contain multiple grammars inside of them.
For instance,
[`tree-sitter-php`](29838ad107)
has subfolders for `php` and `php_only`.
The grammar entries in `extension.toml` can now have an optional `path`
field that will be interpreted relative to the root of the grammar
repository:
```toml
[grammars.php]
repository = "https://github.com/tree-sitter/tree-sitter-php"
commit = "8ab93274065cbaf529ea15c24360cfa3348ec9e4"
path = "php"
```
This was something we supported in the old extension packaging script,
but hadn't yet carried it over when we built the new extension builder.
Release Notes:
- N/A
* Store extensions versions' wasm API version in the database
* Share a common struct for extension API responses between collab and
client
* Add wasm API version and schema version to extension API responses
Release Notes:
- N/A
Co-authored-by: Marshall <marshall@zed.dev>
We're doing it. Svelte support is moving into an extension. This PR
fixes some issues that came up along the way.
Notes
* extensions need to be able to retrieve the path the `node` binary
installed by Zed
* previously we were silently swallowing any errors that occurred while
loading a grammar
* npm commands ran by extensions weren't run in the right directory
* Tree-sitter's WASM stdlib didn't support a C function (`strncmp`)
needed by the Svelte parser's external scanner
* the way that LSP installation status was reported was unnecessarily
complex
Release Notes:
- Removed built-in support for the Svelte and Gleam languages, because
full support for those languages is now available via extensions. These
extensions will be suggested for download when you open a `.svelte` or
`.gleam` file.
---------
Co-authored-by: Marshall <marshall@zed.dev>
This PR updates the extension builder to normalize `-` to `_` in the
Rust package names when computing the resulting `.wasm` file name.
The `wasm32-wasi` target does this normalization internally already, so
we need to do the same to ensure we're looking for the resulting `.wasm`
file in the right spot.
Release Notes:
- N/A
This PR fixes an issue where the extension CLI would error if a
`Cargo.toml` didn't exist when we were trying to check for its
existence. Since we're just checking if it exists for the purposes of
detecting a Rust extension, we can safely ignore the errors.
Also improved the logging/error handling in a few spots to make other
errors easier to troubleshoot in the future.
Release Notes:
- N/A
This will be used in the
[extensions](https://github.com/zed-industries/extensions) repository
for packaging the extensions that users submit.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
2024-03-19 10:50:21 -04:00
Renamed from crates/extension/src/build_extension.rs (Browse further)
