`CodeContextMenu` is always accessed on one thread, so only `Rc`s and
`Rc<RefCell<_>>` are needed. There should be tiny performance benefits
from this. The main benefit of this is that when seeing code accessing a
`RwLock` it would be reasonable to wonder whether it will block. The
only potential downside is the potential for panics due to overlapping
borrows of the RefCells. I think this is an acceptable risk because most
errors of this nature will be local or will be caught by clippy via the
check for holding a RefCell reference over an `await`.
Release Notes:
- N/A
* `Open Excerpts` command always opens the locations in the base buffer
* LSP features like document-highlights, go-to-def, and inlay hints work
correctly in branch buffers
* Other LSP features like completions, code actions, and rename are
disabled in branch buffers
Release Notes:
- N/A
Closes#15860
Since rust std now supports LazyLock replacing lazy_static with it
reduce the external dependency.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Supersedes https://github.com/zed-industries/zed/pull/12090fixes#5180fixes#5055
See original PR for an example of the feature at work.
This PR changes the settings interface to be backwards compatible, and
adds the `ui_font_fallbacks`, `buffer_font_fallbacks`, and
`terminal.font_fallbacks` settings.
Release Notes:
- Added support for font fallbacks via three new settings:
`ui_font_fallbacks`, `buffer_font_fallbacks`, and
`terminal.font_fallbacks`.(#5180, #5055).
---------
Co-authored-by: Junkui Zhang <364772080@qq.com>
This PR updates a number of spots where we were setting all of the
`TextStyle` fields even if we were not changing the values from the
defaults.
We now use `..Default::default()`.
Release Notes:
- N/A
Previously we were using a single globset::Glob in PathMatcher; higher
up the stack, we were then resorting to using a list of PathMatchers.
globset crate exposes a GlobSet type that's better suited for this use
case. In my benchmarks, using a single PathMatcher with GlobSet instead
of a Vec of PathMatchers with Globs is about 3 times faster with the
default 'file_scan_exclusions' values. This slightly improves our
project load time for projects with large # of files, as showcased in
the following videos of loading a project with 100k source files. This
project is *not* a git repository, so it should measure raw overhead on
our side.
Current nightly: 51404d4ea0https://github.com/zed-industries/zed/assets/24362066/e0aa9f8c-aae6-4348-8d42-d20bd41fcd76
versus this PR:
https://github.com/zed-industries/zed/assets/24362066/408dcab1-cee2-4c9e-a541-a31d14772dd7
Release Notes:
- Improved performance in large worktrees
This PR registers the Markdown language in some of the tests in the
`zed` crate to silence the error logs about the language not being found
when the chat panel attempts to load it.
Release Notes:
- N/A
- Confirming a completion now runs the command immediately
- Hitting `enter` on a line with a command now runs it
- The output of commands gets folded away and replaced with a custom
placeholder
- Eliminated ambient context
<img width="1588" alt="image"
src="https://github.com/zed-industries/zed/assets/482957/b1927a45-52d6-4634-acc9-2ee539c1d89a">
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Builds on top of existing work from #2249, but here's a showcase:
https://github.com/zed-industries/zed/assets/53836821/4b346965-6654-496c-b379-75425d9b493f
TODO:
- [x] handle line wrapping
- [x] implement handling in multibuffer (crashes currently)
- [x] add configuration option
- [x] new theme properties? What colors to use?
- [x] Possibly support indents with different colors or background
colors
- [x] investigate edge cases (e.g. indent guides and folds continue on
empty lines even if the next indent is different)
- [x] add more tests (also test `find_active_indent_index`)
- [x] docs (will do in a follow up PR)
- [x] benchmark performance impact
Release Notes:
- Added indent guides
([#5373](https://github.com/zed-industries/zed/issues/5373))
---------
Co-authored-by: Nate Butler <1714999+iamnbutler@users.noreply.github.com>
Co-authored-by: Remco <djsmits12@gmail.com>
Tasks
* [x] remove old flaps and output when editing a slash command
* [x] the completing a command name that takes args, insert a space to
prepare for typing an arg
* [x] always trigger completions when typing in a slash command
* [x] don't show line numbers
* [x] implement `prompt` command
* [x] `current-file` command
* [x] state gets corrupted on `duplicate line up` on a slash command
* [x] exclude slash command source from completion request
Next steps:
* show output token count in flap trailer
* add `/project` command that matches project ambient context
* delete ambient context
Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
This allows function call (i.e. snippet) completion with
`typescript-language-server`. So far that didn't work, because
`typescript-language-server` doesn't respond with `insertText` when
getting the completions, but only when then sending
`completionItem/resolve` requests. See:
https://github.com/hrsh7th/nvim-cmp/issues/646#issuecomment-992765479
What this PR does is to support text edits in the response to
`completionItem/resolve`, which means updating the completion item.
It then enables this feature by default for
`typescript-language-server`.
TODOs:
- [x] Make this work over collab
- [x] Test that this doesn't break existing language server support
- [x] Refactor duplicated code
Release Notes:
- Added support for function call completion when using
`typescript-language-server`. This will result in parameters being
added, which can then be changed and navigated with `<tab>`. For this to
work with `typescript-language-server`, the documentation for a given
completion item needs to be resolved, meaning that if one types very
quickly and accepts completion before `typescript-language-server` could
respond with the documentation, no full function completion is used.
Demo:
https://github.com/zed-industries/zed/assets/1185253/c23ebe12-5902-4b50-888c-d9b8cd32965d
- Centralizes typography-related UI styles and methods in
`styles/typography.rs`
- Breaks the typography-related styles out of `StyledExt`. This means we
add a `StyledTypography` trait – this should more or less be an
invisible change as we publish it in the prelude.
- adds the ability to easily grab the UI or Buffer font sizes
(`ui_font_size`, `buffer_font_size`) with `TextSize::UI`,
`TextSize::Editor`
Release Notes:
- N/A
This adds so-called "inline git blame" to the editor that, when turned
on, shows `git blame` information about the current line inline:
When the inline information is hovered, a new tooltip appears that
contains more information on the current commit:
The commit message in this tooltip is rendered as Markdown, is
scrollable and clickable.
The tooltip is now also the tooltip used in the gutter:
## Settings
1. The inline git blame information can be turned on and off via
settings:
```json
{
"git": {
"inline_blame": {
"enabled": true
}
}
}
```
2. Optionally, a delay can be configured. When a delay is set, the
inline blame information will only show up `x milliseconds` after a
cursor movement:
```json
{
"git": {
"inline_blame": {
"enabled": true,
"delay_ms": 600
}
}
}
```
3. It can also be turned on/off for the current buffer with `editor:
toggle git blame inline`.
## To be done in follow-up PRs
- [ ] Add link to pull request in tooltip
- [ ] Add avatars of users if possible
## Release notes
Release Notes:
- Added inline `git blame` information the editor. It can be turned on
in the settings with `{"git": { "inline_blame": "on" } }` for every
buffer or, temporarily for the current buffer, with `editor: toggle git
blame inline`.
Once we enable extensions to customize the labels of completions and
symbols, this new structure will allow this to be done with a single
WASM call, instead of one WASM call per completion / symbol.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Marshall <marshall@zed.dev>
**Summary**:
- Removed reply message from message_menu
- Made render_popover_buttons a bit more reusable
- Fixed issue that you can't close the reply/edit preview when you are
not focusing the message editor
- Notify only the new people that were mentioned inside the edited
message
**Follow up**
- Fix that we update the notification message for the people that we
mentioned already
- Fix that we remove the notification when a message gets deleted.
- Fix last acknowledge message id is in correct now
**Todo**:
- [x] Add tests
- [x] Change new added bindings to the `Editor::Cancel` event.
Release Notes:
- Added editing of chat messages
([#6707](https://github.com/zed-industries/zed/issues/6707)).
<img width="239" alt="Screenshot 2024-03-09 at 11 55 23"
src="https://github.com/zed-industries/zed/assets/62463826/b0949f0d-0f8b-43e1-ac20-4c6d40ac41e1">
<img width="240" alt="Screenshot 2024-03-13 at 13 34 23"
src="https://github.com/zed-industries/zed/assets/62463826/d0636da2-c5aa-4fed-858e-4bebe5695ba7">
---------
Co-authored-by: Bennet Bo Fenner <53836821+bennetbo@users.noreply.github.com>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#5178
Release Notes:
- Added a `file_types` setting that can be used to associate languages
with file names and file extensions. For example, to interpret all `.c`
files as C++, and files called `MyLockFile` as TOML, add the following
to `settings.json`:
```json
{
"file_types": {
"C++": ["c"],
"TOML": ["MyLockFile"]
}
}
```
As with most zed settings, this can be configured on a per-directory
basis by including a local `.zed/settings.json` file in that directory.
---------
Co-authored-by: Marshall <marshall@zed.dev>
Add plumbing for hosted projects. This will currently show them if they
exist
but provides no UX to create/rename/delete them.
Also changed the `ChannelId` type to not auto-cast to u64; this avoids
type
confusion if you have multiple id types.
Release Notes:
- N/A
This PR adds a `SystemClock` trait for abstracting away the system
clock.
This allows us to swap out the real system clock with a
`FakeSystemClock` in the tests, thus allowing the fake passage of time.
We're using this in `Telemetry` to better mock the clock for testing
purposes.
Release Notes:
- N/A
Feature
- [x] Allow to click on reply to go to the real message
- [x] In chat
- [x] Show only a part of the message that you reply to
- [x] In chat
- [x] In reply preview
TODO’s
- [x] Fix migration
- [x] timestamp(in filename)
- [x] remove the reference to the reply_message_id
- [x] Fix markdown cache for reply message
- [x] Fix spacing when first message is a reply to you and you want to
reply to that message.
- [x] Fetch message that you replied to
- [x] allow fetching messages that are not inside the current view
- [x] When message is deleted, we should show a text like `message
deleted` or something
- [x] Show correct GitHub username + icon after `Replied to: `
- [x] Show correct message(now it's hard-coded)
- [x] Add icon to reply + add the onClick logic
- [x] Show message that you want to reply to
- [x] Allow to click away the message that you want to reply to
- [x] Fix hard-coded GitHub user + icon after `Reply tp:`
- [x] Add tests
<img width="242" alt="Screenshot 2024-02-06 at 20 51 40"
src="https://github.com/zed-industries/zed/assets/62463826/a7a5f3e0-dee3-4d38-95db-258b169e4498">
<img width="240" alt="Screenshot 2024-02-06 at 20 52 02"
src="https://github.com/zed-industries/zed/assets/62463826/3e136de3-4135-4c07-bd43-30089b677c0a">
Release Notes:
- Added the ability to reply to a message.
- Added highlight message when you click on mention notifications or a
reply message.
---------
Co-authored-by: Bennet Bo Fenner <53836821+bennetbo@users.noreply.github.com>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR is a follow-up to #7084, where I noted that I wasn't satisfied
with using `SharedUri` to represent both URIs and paths on the local
filesystem:
> I'm still not entirely happy with this naming, as the file paths that
we can store in here are not _really_ URIs, as they are lacking a
protocol.
>
> I want to explore changing `SharedUri` / `SharedUrl` back to alway
storing a URL and treat local filepaths differently, as it seems we're
conflating two different concerns under the same umbrella, at the
moment.
`SharedUri` has now been reverted to just containing a `SharedString`
with a URI.
`ImageSource` now has a new `File` variant that is used to load an image
from a `PathBuf`.
Release Notes:
- N/A
This PR renames `SharedUrl` to `SharedUri` to better reflect its intent.
I'm still not entirely happy with this naming, as the file paths that we
can store in here are not _really_ URIs, as they are lacking a protocol.
I want to explore changing `SharedUri` / `SharedUrl` back to alway
storing a URL and treat local filepaths differently, as it seems we're
conflating two different concerns under the same umbrella, at the
moment.
Release Notes:
- N/A
This PR implements support for loading and displaying images from a
local file using gpui's `img` element.
API Changes:
- Changed `SharedUrl` to `SharedUrl::File`, `SharedUrl::Network`
Usage:
```rust
// load from network
img(SharedUrl::network(...)) // previously img(SharedUrl(...)
// load from filesystem
img(SharedUrl::file(...))
```
This will be useful when implementing markdown image support, because we
need to be able to render images from the filesystem (relative/absolute
path), e.g. when implementing markdown preview #5064.
I also added an example `image` to the gpui crate, let me know if this
is useful. Showcase:
<img width="872" alt="image"
src="https://github.com/zed-industries/zed/assets/53836821/b4310a26-db81-44fa-9a7b-61e7d0ad4349">
**Note**: The example is fetching images from [Lorem
Picsum](https://picsum.photos) ([Github
Repo](https://github.com/DMarby/picsum-photos)), which is a free
resource for fetching images in a specific size. Please let me know if
you're okay with using this in the example.
