This Pull Request fixes the current paste behavior in vim mode, when in
visual mode, and the cursor is at a newline character. Currently this
joins the pasted contents with the line right below it, but in vim this
does not happen, so these changes make it so that Zed's vim mode behaves
the same as vim for this specific case.
Closes#29270
Release Notes:
- Fixed pasting in vim's visual line mode when cursor is on a newline
character
This Pull Request attempts to fix an issue where using `d}` in vim mode
would not delete all characters in case there's no blank lines at the
end of the buffer.
When calculating the end point for this motion, if there's no blank
lines at the end of the buffer, Zed was calculating it to be the last
character in the last line. However, if there's a newline at the end of
the buffer, it calculates the end point to be the point at the right of
the last character.
Here's an example, for the following buffer contents:
```
Hello!
Hello!
```
If the `d}` command is run at `(0, 0)`, the end point will be set to
`(1, 5)`. However, fi the same command is run for this buffer instead:
```
Hello!
Hello!
```
The end point will be set to `(1, 6)`, there's a 1 unit difference in
the column, which leads to all characters actually being deleted.
Closes#29393
Release Notes:
- Fixed deleting to the end of paragraph when there's no blank lines
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
When using 'c' with line-wise motions like j/k, operate like cc to fix
indentation issues.
Closes#28933
Release Notes:
- `c j` and `c k` now respect indentation
Update the `Vim::replace_command` method so as to reset the range in the
`BufferSearchBar` after running the replacement in order to fix the
issue where the number of matches in the search bar would be incorrect
after the replacement was done, as it would only take into consideration
the range in which the replacement happened, instead of the whole
buffer.
In order to get this working a new
`BufferSearchBar::clear_search_within_ranges` method is introduced in
these changes.
Release Notes:
- Fixed the number of matches displayed in the search bar after running
vim's substitute command.
This Pull Request updates the default behavior of the substitute (`s`)
command in vim mode to only replace the next match by default, instead
of all, and replace all matches only when the `g` flag is provided,
making it more similar to NeoVim's behavior.
In order to achieve this, the following changes were introduced:
- Update `BufferSearchBar::replace_next` to be a public method, so it
can be called from `Vim::replace_command` .
- Update the `Replacement::parse` to set the `should_replace_all` field
to `false` by default, and only set it to `true` if the `'g'` flag is
present in the query.
- Add support for when the `Replacement.should_replace_all` is set to
`false` in `Vim::replace_command`, so as to have it only replace the
next occurrence instead of all occurrences in the line.
- Introduce `BufferSearchBar::select_first_match` so as to activate the
first match on the line under the cursor.
Closes#24450
Release Notes:
- Improved vim's substitute command so as to only replace the first
match by default, and replace all matches if the `'g'` flag is provided
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: João Marcos <marcospb19@hotmail.com>
Release Notes:
- Fixed a panic with completions around non-ASCII code
---------
Co-authored-by: João Marcos <marcospb19@hotmail.com>
This PR reverts #27897, as it is causing a number of Helix-related tests
to fail:
```
Summary [ 84.324s] 1796 tests run: 1793 passed, 3 failed, 0 skipped
FAIL [ 0.434s] vim helix::test::test_delete
FAIL [ 0.562s] vim helix::test::test_delete_character_end_of_buffer
FAIL [ 0.537s] vim helix::test::test_delete_character_end_of_line
```
This reverts commit 9949512b64.
Release Notes:
- Community: Reverted https://github.com/zed-industries/zed/pull/27897.
This adds a `next_mode` parameter to the `vim::Paste` action. My main
use-case for this is for helix users, who will want to switch into
`HelixNormal` mode instead of `Normal` mode.
I'm not sure if this is the best approach -- another possibility would
be to have a global vim-vs-helix configuration, and then have every
invocation of "normal" mode choose vim or helix based on that global
configuration. But the approach in this PR is much less invasive.
Release Notes:
- vim: switch to the configured default mode after paste instead of
hard-coding Normal mode
This PR completes the process of moving git repository state storage and
scanning logic from the worktree crate to `project::git_store`.
Release Notes:
- N/A
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Conrad <conrad@zed.dev>
Before this change we didn't explicitly handle vim's exclusive-linewise
edgecase
(https://neovim.io/doc/user/motion.html#exclusive).
Instead we had hard-coded workarounds in a few places to make our tests
pass.
The most pernicious of these workarounds was that we represented a
visual line
selection as including the trailing newline (or leading newline for
files that
end with no newline), which other code had to undo to get back to what
the user
indended.
Closes#21440
Updates #6900
Release Notes:
- vim: Fixed `d]}` to not delete the closing brace
- vim: Fixed `d}` from the start of the line to not delete the paragraph
separator
- vim: Fixed `d}` from the middle of the line to not delete the final
newline
Closes#22398
Release Notes:
- vim: Adds `'` and `"` marks (last location jumped from in the current
buffer, and location when last exiting a buffer)
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#26884
Release Notes:
- vim: Added `:marks` which brings up list of current marks
- confirming on selected mark in the view jumps to that mark
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This is the core change:
https://github.com/zed-industries/zed/pull/26758/files#diff-044302c0d57147af17e68a0009fee3e8dcdfb4f32c27a915e70cfa80e987f765R1052
TODO:
- [x] Use AsyncFn instead of Fn() -> Future in GPUI spawn methods
- [x] Implement it in the whole app
- [x] Implement it in the debugger
- [x] Glance at the RPC crate, and see if those box future methods can
be switched over. Answer: It can't directly, as you can't make an
AsyncFn* into a trait object. There's ways around that, but they're all
more complex than just keeping the code as is.
- [ ] Fix platform specific code
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/13111
Release Notes:
- vim: Added global marks `'[A-Z]`
- vim: Added persistence for global (and local) marks. When re-opening
the same workspace your previous marks will be available.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes https://github.com/zed-industries/zed/issues/24914 (again)
Release Notes:
- Fixed an issue where multi-line pasted content was auto-indented
incorrectly if copied from the middle of an existing line.
https://github.com/zed-industries/zed/pull/25663#issuecomment-2686095807
Renamed the `vim::Backspace` and `vim::Space` actions to
`vim::WrappingLeft` and `vim::WrappingRight` respectively. The old names
are still available, but they are marked as deprecated and users are
advised to use the new names.
Also added a paragraph to the docs describing how to enable wrapping
cursor navigation.
Closes#10400
Closes https://github.com/zed-industries/zed/issues/17947
Changes:
- Let vim::increment find boolean values in the line and toggle them.
Release Notes:
- vim: Added support for toggling boolean values with `ctrl-a`/`ctrl-x`
This solves a couple of issues with Vim search by making the search
buffer and `SearchableItem` aware of the direction of the search. If
`SearchOptions::BACKWARDS` is set, all operations will be reversed. By
making `SearchableItem` aware of the direction, the correct active match
can be selected when searching backward.
Fixes#22506. This PR does not fix the last problem in that issue, but
that one is also tracked in #8049.
Release Notes:
- Fixes incorrect behavior of backward search in Vim mode
Closes#22999
# Problem
Currently, the default soft wrap mode of an editor is determined by
reading the language-specific settings of the language _at offset zero_
in the editor's (multi)buffer. While this provides a way to pick a
single soft wrap mode for a multi-language multibuffer, it's a bad
choice for a single-buffer multibuffer that begins with a different
embedded language. For example, Markdown with frontmatter:
```markdown
---
my_front_matter
---
# Hello World
```
Setting this in config:
```json
"languages": {
"Markdown": { "soft_wrap": "bounded" }
},
```
Will not soft wrap the Markdown file as the language at offset zero is
YAML.
# Solution
Instead of using the language at offset zero, use the language of the
first buffer in the multibuffer (the buffer at offset zero). This gives
better behavior for single-buffer editors, and a similar default for
multi-language multibuffers as before.
# Testing
All existing `editor` crate tests pass, but I would appreciate any
guidance for where best to add additional testing.
Release Notes:
- Fixed soft_wrap setting not applying to buffers starting with a
different language
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
In file search submit action, handle unwrap when there are no prior
selection.
Fix is for recently made commits, hence no release notes.
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <anthony@zed.dev>
Add support for `stop_at_indent` option for MoveToBeginningOfLine and SelectToBeginningOfLine instead of mixing that with `stop_at_soft_wraps`.
Add emacs mapping for `alt-m` (`back-to-indentation`)
Changes:
- [x] Cursor at the start during yank operations on objects (`yip`,
`yab` etc).
- [x] Refactors this: Trim all leading and trailing whitespace from
inner multiline bracket selection.
- This leaves a nicely indented line when doing `ci{` `vi{d` etc
- [x] Checks for empty selection
- [x] Removed moving cursor to the start in visual bracket operations
This cleans up the previous implementation by providing a simpler check
in `surrounding_markers`, instead of calling a new function in
`expand_object`. No functionality was changed there except for handling
the empty selection and removing some cursor adjustments that should not
have been there after further testing.
Release Notes:
- N/A
Closes#12236
This PR fixes an issue where the `auto_indent_on_paste` setting was not
being applied for pasting in Vim mode. It was correctly used for normal
paste behavior.
Also includes tests.
Release Notes:
- Fixed yank + paste indenting incorrectly when `auto_indent_on_paste`
is set to `false` in certain languages.
- [x] snake case keymap properties
- [x] flatten actions
- [x] keymap migration + notfication
- [x] settings migration + notification
- [x] inline completions -> edit predictions
### future:
- keymap notification doesn't show up on start up, only on keymap save.
this is existing bug in zed, will be addressed in seperate PR.
Release Notes:
- Added a notification for deprecated settings and keymaps, allowing you
to migrate them with a single click. A backup of your existing keymap
and settings will be created in your home directory.
- Modified some keymap actions and settings for consistency.
---------
Co-authored-by: Piotr Osiewicz <piotr@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Closes#24270
Release Notes:
- Fixed an issue where doing line-wise operations in vim mode on the
last line of a file with no trailing newline would not work properly
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Closes#24124
Release Notes:
- Fixed an issue in vim mode where changing the case of an object at the
end of the line would not change the case of the last character in the
object
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Fix a bug where a GPUI macro still used `ModelContext`
Rename `AsyncAppContext` -> `AsyncApp`
Rename update_model, read_model, insert_model, and reserve_model to
update_entity, read_entity, insert_entity, and reserve_entity
Release Notes:
- N/A
There's still a bit more work to do on this, but this PR is compiling
(with warnings) after eliminating the key types. When the tasks below
are complete, this will be the new narrative for GPUI:
- `Entity<T>` - This replaces `View<T>`/`Model<T>`. It represents a unit
of state, and if `T` implements `Render`, then `Entity<T>` implements
`Element`.
- `&mut App` This replaces `AppContext` and represents the app.
- `&mut Context<T>` This replaces `ModelContext` and derefs to `App`. It
is provided by the framework when updating an entity.
- `&mut Window` Broken out of `&mut WindowContext` which no longer
exists. Every method that once took `&mut WindowContext` now takes `&mut
Window, &mut App` and every method that took `&mut ViewContext<T>` now
takes `&mut Window, &mut Context<T>`
Not pictured here are the two other failed attempts. It's been quite a
month!
Tasks:
- [x] Remove `View`, `ViewContext`, `WindowContext` and thread through
`Window`
- [x] [@cole-miller @mikayla-maki] Redraw window when entities change
- [x] [@cole-miller @mikayla-maki] Get examples and Zed running
- [x] [@cole-miller @mikayla-maki] Fix Zed rendering
- [x] [@mikayla-maki] Fix todo! macros and comments
- [x] Fix a bug where the editor would not be redrawn because of view
caching
- [x] remove publicness window.notify() and replace with
`AppContext::notify`
- [x] remove `observe_new_window_models`, replace with
`observe_new_models` with an optional window
- [x] Fix a bug where the project panel would not be redrawn because of
the wrong refresh() call being used
- [x] Fix the tests
- [x] Fix warnings by eliminating `Window` params or using `_`
- [x] Fix conflicts
- [x] Simplify generic code where possible
- [x] Rename types
- [ ] Update docs
### issues post merge
- [x] Issues switching between normal and insert mode
- [x] Assistant re-rendering failure
- [x] Vim test failures
- [x] Mac build issue
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Joseph <joseph@zed.dev>
Co-authored-by: max <max@zed.dev>
Co-authored-by: Michael Sloan <michael@zed.dev>
Co-authored-by: Mikayla Maki <mikaylamaki@Mikaylas-MacBook-Pro.local>
Co-authored-by: Mikayla <mikayla.c.maki@gmail.com>
Co-authored-by: joão <joao@zed.dev>
