This PR replaces almost all uses of "discard" in the git panel UI with
"restore", since that's the verb we settled on for the project diff.
The only exception is in the confirmation prompt for restoring files,
where I've kept the "discard changes" language. I think consistency is
less important here and it's helpful to rephrase the action that's being
taken to emphasize that it's destructive.
Release Notes:
- N/A
Follow-up of https://github.com/zed-industries/zed/pull/25605
Previous PR made global tasks with `ZED_WORKTREE_ROOT` available for
"nothing open" scenario, this PR also gets all related worktree task
templates, using the centralized `TextContexts`' active worktree
detection.
Release Notes:
- N/A
My previous #24761 and #25192 PR's changed the order of the buttons in
the title_bar for collab, the logic is kept the same but the order is
now as it was previously.
Release Notes:
- N/A
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
This PR fixes an unexpected cursor position when jumping to the
beginning of the project diff editor's first excerpt if that excerpt
starts with a deleted region. Previously, the cursor would end up in the
*following* region in this situation; now it ends up at the start of the
deleted region, as happens already for excerpts that are not the first.
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Closes#25384
Markdown preview now subscribes to `ExcerptsEdited` event which is
emited when edit prediction is accepted.
Release Notes:
- Fixed markdown preview not updating when edit prediction is accepted.
It may happen that the column for the scroll anchor is nonzero, and the
adjustment we're doing here could result in an invalid point in that
case.
Release Notes:
- N/A
Co-authored-by: Max <max@zed.dev>
Closes: #25556
We were always comparing `disabled_globs` against the relative file
path, we'll now use the absolute path if the glob is also absolute.
Release Notes:
- Support absolute globs in `edit_predictions.disabled_globs`
Previously, we had the cursor at the bottom while the scroll stayed at
the top.
Now, if you run `git: diff`, the cursor will also be at the top.
The cursor moving to the end was possibly a side-effect of using
`Bias::Right` for selections.
---
Release Notes:
- N/A
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Going for a different, arguably simpler design for the Assistant 2 empty
state here. Also took the opportunity to adjust other elements like the
toolbar, message editor, and some items in the configuration page.
<img
src="https://github.com/user-attachments/assets/03fd1d48-a675-4eac-b694-bbe4eeaf06e9"
width="700px"/>
Release Notes:
- N/A
Closes#25471
In languages like Swift, names can be concatinated in form like `class
Example: UI`, notice here `Example` and `:` are two different words.
Before, `name_ranges`translation of above text would look like:
```
"class" -> [0..5]
" Example" -> [5..13] (Spaces are intentional)
"e:" -> [12..14] (This is incorrect, and should be ":" -> [13..14])
" UI" -> [14..16]
```
Because this translation does not account for concatinated words, this
might affect queries, but most importantly this panics when multi-byte
character (`ф`) is used in place of `e`, as it then tries to access
index which lies inside that multi-byte. For example, it panics on
`class Examplф: UI`.
---
This PR fixes this by handing concatinated words when calculating
`name_ranges`.
Now, the corrected ranges will look like:
```
"class" -> [0..5]
" Example" -> [5..13]
":" -> [13..14] (Now it's correct)
" UI" -> [14..16]
```
and for multi-byte character
```
"class" -> [0..5]
" Examplф" -> [5..14] (Notice ф takes two bytes)
":" -> [14..15]
" UI" -> [15..17]
```
This way, it no longer tries to access a previous index, preventing a
panic when that index contains a multi-byte character.
Release Notes:
- Fixed a panic when Cyrillic characters are used in languages like
Swift.
Before it would always say staged when a user hovered over the check
box. Now it will show the correct hover message depending on the state
of the entry
Release Notes:
- N/A
This PR moves the `PopoverButton` component into the `ui` crate.
The `popover_button` crate only depended on `ui`, so there doesn't seem
to be a need for it to live in its own crate and add another step in the
crate graph.
Release Notes:
- N/A
This PR combines two disjoint conditions for the same value into one.
This makes it so the type checker can accurately reason about the
branches.
Release Notes:
- N/A
Closes#25714
Internal team reported issue where the Bedrock provider defaulted to
"us-east-1" for all requests regardless of what is configured in the
credentials until first zed restart.
Release Notes:
- Fixed an issue where the Bedrock model provider would not always
respect the region.
This PR updates the tool use flow in Assistant 2 to automatically
respond to the model with tool results when the tools have finished
running.
Release Notes:
- N/A
This PR adds a new `send_to_model` method to the `Thread` to encapsulate
more of the thread-specific capabilities.
We then call this in `MessageEditor::send_to_model`.
Release Notes:
- N/A
This PR fixes the generation of summaries for threads when tools are
being used.
Previously we were including the tool uses in the summarization request,
but this would result in invalid messages being sent to the model and
summaries not being generated.
We now exclude any tool uses or results from the model when summarizing
a thread.
Release Notes:
- N/A
This PR makes `auto` an alias for the `subtle` edit prediction mode.
Right now I'm in a state where I can't have valid settings in both
development and Nightly because the settings values are disparate.
Release Notes:
- N/A
- Closes https://github.com/zed-industries/zed/issues/22818
Usage: `ssh -F ssh_config user@host.tld`
```
-F configfile
Specifies an alternative per-user configuration file. If a configuration file
is given on the command line, the system-wide configuration file
(/etc/ssh/ssh_config) will be ignored. The default for the per-user
configuration file is ~/.ssh/config. If set to “none”, no configuration files
will be read.
```
Release Notes:
- ssh: Added support for specifying ssh_config files (`ssh -F
ssh_config`) in connection string
- Closes: https://github.com/zed-industries/zed/issues/22380
Arch linux ships busybox wget not gnu wget.
BusyBox wget does not support `--max-redirect`.
Release Notes:
- ssh: Add support for downloading `zed-remote-server` with busybox wget (ArchLinux, etc)
Closes https://github.com/zed-industries/zed/issues/22912
Reworks the task context infrastructure so that it's possible to have
multiple contexts at the same time, and stores all possible worktree
context there.
Task UI code is now falling back to the "active" worktree context, if
active item's context did not produce a resolved task.
Current code does not produce meaningful results for projects with
multiple worktrees to avoid ambiguity and design changes: instead of
resolving tasks per worktree context available, extra worktree context
is only used when resolving tasks from the same worktree.
Release Notes:
- Improved Zed tasks' `ZED_WORKTREE_ROOT` fallbacks
When migrating to gpui2,
588976d27a (diff-a3da3181e4ab4f73aa1697d7b6dc0caa0c17b2a187fb83b076dfc0234ec91f54R21)
removed the diagnostic style for "active but invalid" case: presumably,
it served as some sort of a cursor to show where to move on after the
diagnostics update, on the next `GoTo[Prev]Diagnostic` action call.
As this change went unchanged for some time, another approach is tested
now, to be more integrated with inline diagnostics: now, the active
state is cleared
Same as before this change, another `GoTo[Prev]Diagnostic` action call
will be needed to re-expand a new diagnostics, but this change makes
this expansion to happen after the cursor — before the change, Zed would
continue from the stale diagnostics.
Release Notes:
- Fixed active diagnostics becoming stale
This PR fixes a bug where using the project diff editor to restore hunks
from a file that's not open in its own buffer would cause those reverts
to be lost once the project diff drops its excerpts for that file.
The fix is to save the buffers after restoring them but before the
excerpts are (potentially) dropped. This is done for the project diff
editor only. If we fail to save the affected files, we add their buffers
to the active workspace, so that the reverted contents are preserved and
the user can try again to save them.
- [x] Get it working
- [x] Test
- [ ] ~~Clean up boolean soup~~
Co-authored-by: Max <max@zed.dev>
Release Notes:
- N/A
