https://github.com/zed-industries/zed/issues/30972 brought up another
case where our context is not enough to track the actual source of the
issue: we get a general top-level error without inner error.
The reason for this was `.ok_or_else(|| anyhow!("failed to read HEAD
SHA"))?; ` on the top level.
The PR finally reworks the way we use anyhow to reduce such issues (or
at least make it simpler to bubble them up later in a fix).
On top of that, uses a few more anyhow methods for better readability.
* `.ok_or_else(|| anyhow!("..."))`, `map_err` and other similar error
conversion/option reporting cases are replaced with `context` and
`with_context` calls
* in addition to that, various `anyhow!("failed to do ...")` are
stripped with `.context("Doing ...")` messages instead to remove the
parasitic `failed to` text
* `anyhow::ensure!` is used instead of `if ... { return Err(...); }`
calls
* `anyhow::bail!` is used instead of `return Err(anyhow!(...));`
Release Notes:
- N/A
Release Notes:
- debugger: allow setting env vars and arguments on the launch command.
---------
Co-authored-by: Cole Miller <m@cole-miller.net>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR simplifies the new session modal by flattening its three modes
and updating the UI to be less noisy. The new UI also defaults to the
Debug Scenario Picker, and allows users to save debug scenarios created
in the UI to the active worktree's .zed/debug.json file.
Release Notes:
- N/A
There were two bugs that caused user-defined debug scenarios from being
able to run a build task.
1. DebugRequest would be deserialized to `Attach` even when `process_id`
wasn't defined in a user's configuration file. This has been fixed by
adding our own deserializer that defaults to None if there are no fields
present instead of `Attach`, and I added tests to prevent regressions.
2. Debug scenario resolve phase never got the active buffer when
spawning a debug session from the new session modal. This has been
worked around by passing in the worktree_id of a debug scenario in the
scenario picker and the active worktree_id otherwise.
Release Notes:
- N/A
Split `locator` out of DebugTaskDefinition to make it clearer when
location needs to happen.
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Cole Miller <m@cole-miller.net>
This PR adds passing in `stop_on_entry` to debug configs in debug.json
instead of going through initialization args.
This has two benefits:
1. It's more streamlined to a user since every internal adapter supports
`stop_on_entry` for launch requests and Go's adapter supports it for
attach requests too.
2. It will allow @osiewicz `NewSesssionModal` PR to use this field for
the stop on entry checkbox.
Release Notes:
- N/A
## Summary
This PR starts the process of adding debug task locators to Zed's
debugger system. A task locator is a secondary resolution phase that
allows a debug task to run a command before starting a debug session and
then uses the output of the run command to configure itself.
Locators are most applicable when debugging a compiled language but will
be helpful for any language as well.
## Architecture
At a high level, this works by adding a debug task queue to `Workspace`.
Which add's a debug configuration associated with a `TaskId` whenever a
resolved task with a debug config is added to `TaskInventory`'s queue.
Then, when the `SpawnInTerminal` task finishes running, it emits its
task_id and the result of the ran task.
When a ran task exits successfully, `Workspace` tells `Project` to start
a debug session using its stored debug config, then `DapStore` queries
the `LocatorStore` to configure the debug configuration if it has a
valid locator argument.
Release Notes:
- N/A
This is a clean-up PR in anticipation of introduction of Debugger
Registry. I wanna get rid of DebugAdapterKind (or rather, it being an
enum).
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
### DISCLAIMER
> As of 6th March 2025, debugger is still in development. We plan to
merge it behind a staff-only feature flag for staff use only, followed
by non-public release and then finally a public one (akin to how Git
panel release was handled). This is done to ensure the best experience
when it gets released.
### END OF DISCLAIMER
**The current state of the debugger implementation:**
https://github.com/user-attachments/assets/c4deff07-80dd-4dc6-ad2e-0c252a478fe9https://github.com/user-attachments/assets/e1ed2345-b750-4bb6-9c97-50961b76904f
----
All the todo's are in the following channel, so it's easier to work on
this together:
https://zed.dev/channel/zed-debugger-11370
If you are on Linux, you can use the following command to join the
channel:
```cli
zed https://zed.dev/channel/zed-debugger-11370
```
## Current Features
- Collab
- Breakpoints
- Sync when you (re)join a project
- Sync when you add/remove a breakpoint
- Sync active debug line
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Restart stack frame (if adapter supports this)
- Variables
- Loaded sources
- Modules
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Debug console
- Breakpoints
- Log breakpoints
- line breakpoints
- Persistent between zed sessions (configurable)
- Multi buffer support
- Toggle disable/enable all breakpoints
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Show collapsed stack frames
- Restart stack frame (if adapter supports this)
- Loaded sources
- View all used loaded sources if supported by adapter.
- Modules
- View all used modules (if adapter supports this)
- Variables
- Copy value
- Copy name
- Copy memory reference
- Set value (if adapter supports this)
- keyboard navigation
- Debug Console
- See logs
- View output that was sent from debug adapter
- Output grouping
- Evaluate code
- Updates the variable list
- Auto completion
- If not supported by adapter, we will show auto-completion for existing
variables
- Debug Terminal
- Run custom commands and change env values right inside your Zed
terminal
- Attach to process (if adapter supports this)
- Process picker
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Disconnect
- Restart
- Stop
- Warning when a debug session exited without hitting any breakpoint
- Debug view to see Adapter/RPC log messages
- Testing
- Fake debug adapter
- Fake requests & events
---
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
Co-authored-by: Piotr <piotr@zed.dev>
