* When staging in a buffer whose file has been deleted, do not save the
file
* Fix logic for writing to index when file is deleted
Release Notes:
- N/A
Release Notes:
- Fixed gutter highlights not matching diff hunks in multibuffers in
some cases
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Closes https://github.com/zed-industries/zed/issues/25377
Release Notes:
- Fixed a crash that could happen when typing in the assistant panel
with edit predictions enabled.
---------
Co-authored-by: Cole Miller <m@cole-miller.net>
Closes#25513
This PR handles case when `editor::SelectLargerSyntaxNode` expands
across excerpt boundaries and eventually crashes in multi buffer.
Release Notes:
- Fixed panic caused when `editor::SelectLargerSyntaxNode` is called
repetedly in multi buffer.
Co-authored-by: Ben Kunkle <ben.kunkle@gmail.com>
Add support for `stop_at_indent` option for MoveToBeginningOfLine and SelectToBeginningOfLine instead of mixing that with `stop_at_soft_wraps`.
Add emacs mapping for `alt-m` (`back-to-indentation`)
Closes: #25475
This PR makes it possible to stage uncommitted hunks that overlap but do
not coincide with an unstaged hunk.
Release Notes:
- Made it possible to stage hunks that are already partially staged
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Max <max@zed.dev>
Fixes a few state mismatches when changing providers and other settings
Release Notes:
- edit predictions: Fix mismatch between status bar settings and editor
control settings
- edit predictions: Turn off as soon as `edit_prediction_provider` is
set to `none`
---------
Co-authored-by: Danilo <danilo@zed.dev>
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Closes#24982
Release Notes:
- Fix `GoToDefinitionSplit` action bug where split wouldn't happen if
definition was in the same active editor
---------
Co-authored-by: Dylan <dylwil3@gmail.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Release Notes:
- Fix run indicators jumping when content changes
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Closes https://github.com/zed-industries/zed/issues/25406
### Problem
Users have been confused about requiring `alt-tab` instead of just `tab`
in cases where they don't have a completions menu open (see issue
above). When they insert a newline and are in leading whitespace, they
expect to be able to accept a prediction with just `tab`, but doing so
increasing the indentation instead.
This PR changes the behavior in so a modifier is only required if the
cursor isn't already at the right indentation level based on the
surrounding block. In this case, `tab` would increase the indentation
and the prediction would get interpolated, allowing the user to press
`tab` again to accept it.
We also updated the docs to break down this behavior:
https://github.com/zed-industries/zed/pull/25493
### Before
https://github.com/user-attachments/assets/91fe6193-dddd-43c1-8c26-0f4648bdc3fa
### After
https://github.com/user-attachments/assets/671041bf-bf22-46a3-8466-b19b3e7dd6a0
Release Notes:
- edit predictions: Do not require a modifier key when indentation is
correct according to its surrounding block
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
This function has grown a lot and it was getting really hard to
navigate. This PR splits it into smaller methods and moves it into
`Editor` with the rest of the edit prediction popovers' code.
I think there are opportunities to consolidate the many popovers we
have, but we'll do that separately.
Release Notes:
- N/A
This reverts commit a8610fbd13.
I've been seeing some reports of segmentation faults that appear to
point to this change as the culprit.
Closes#25366.
Release Notes:
- Community: Reverted #25040, so remove the corresponding entry from the
release notes.
This is more consistent with the nomenclature in the rest of Zed.
Release Notes:
- Renamed the `editor::ExpandAllHunkDiffs` action to
`editor::ExpandAllDiffHunks`
Covers part of #5129 by adding `MoveToStartOfExcerpt`,
`MoveToEndOfExcerpt`, `SelectToStartOfExcerpt`, and
`SelectToEndOfExcerpt`.
No default linux bindings yet as it's unclear what to use. Currently,
`ctrl-up` / `ctrl-down` scroll up and down by one line (see #13269).
Considering changing the meaning of those.
Mac:
* Previously `cmd-up` and `cmd-down` were `editor::MoveToBeginning` and
`editor::MoveToEnd`. In singleton editors these will behave the same as
before. In multibuffers, they will now step through excerpts instead of
jumping to the beginning / end of the multibuffer.
* `cmd-home` and `cmd-end`, often typed as `cmd-fn-left` and
`cmd-fn-right` are now `editor::MoveToBeginning` and
`editor::MoveToEnd`. This is useful in multibuffers.
Release Notes:
- Mac: `cmd-up` now moves to the previous
multibuffer excerpt start, and `cmd-down` moves to the next multibuffer
excerpt end. Within normal buffers these behave the same as before, moving
to the beginning or end.
Discards an inline completion when it's toggled to off (using, say, a
keyboard shortcut). This matches the behaviour in VS Code and JetBrains,
and I think is a bit more intuitive.
(https://github.com/zed-industries/zed/discussions/24895)
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/4461
This PR improves the coding experience by hiding the mouse while the
user is typing so it does not accidentally get in their way, making it
challenging to ready characters in the editor.
Release Notes:
- The following PR hides the cursor when the user is typing by adding a
new cursor style called `None`.
- Assuming the user does not move the mouse, it will stay hidden until
it is moved again.
https://github.com/user-attachments/assets/6ba9f2ee-b9f3-4595-81e4-e9d986da4a39
---------
Co-authored-by: Agus <agus@zed.dev>
Co-authored-by: Peter Tripp <peter@zed.dev>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Give the inline file crease inside of `assistant2`'s editor a
selection background when there is a selection over it
Release Notes:
- N/A
---------
Co-authored-by: Piotr <piotr@zed.dev>
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Closes#12064
It feels a bit strange to use `brackets` for this but it seems to work
without unintended consequences from my testing so far.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Closes #ISSUE
Release Notes:
- Rename `editor::RevertSelectedHunks` and `editor::RevertFile` to
`git::Restore` and `git::RestoreFile` for consistency with git
Closes https://github.com/zed-industries/zed/issues/10122
Closes https://github.com/zed-industries/zed/issues/25034
When formatting buffers or reloading them after they change on disk, we
performed a diff between the buffer's current contents and the new
content. We need this diff in order preserve the positions of cursors
and other decorations when updating the buffer's text.
In order to handle changes within lines, we would previously compute a
*character-wise* diff. This was extremely expensive for large files.
This PR gets rid of the character-wise diff, and instead performs a
normal line-wise diff. Then, for certain replace hunks, we compute a
secondary word-based diff. Also, I've switched to the
[`imara-diff`](https://github.com/pascalkuthe/imara-diff) crate, instead
of `similar`.
Release Notes:
- Fixed a hang that could occur when large files were changed on disk or
formatted.
This PR adds a new `allow_rewrap` setting to control how
`editor::Rewrap` behaves for a given language.
This is a language setting, so it can either be configured globally or
within the context of an individual language.
For example:
```json
{
"allow_rewrap": "in_selections",
"languages": {
"Typst": {
"allow_rewrap": "anywhere"
}
}
}
```
There are three different values:
- `in_comment`: Only perform rewrapping within comments.
- `in_selections`: Only perform rewrapping within the current
selection(s).
- `anywhere`: Allow rewrapping anywhere.
The global default is `in_comment`, as it is the most conservative
option and allows rewrapping comments without risking breaking other
syntax.
The `Markdown` and `Plain Text` languages default to `anywhere`, which
mirrors the previous behavior for those language that was hard-coded
into the rewrap implementation.
This setting does not have any effect in Vim mode, as Vim mode already
allowed rewrapping anywhere.
Closes https://github.com/zed-industries/zed/issues/24242.
Release Notes:
- Added an `allow_rewrap` setting to control the `editor::Rewrap`
behavior for a given language.
The language::markdown crate had been superceded by markdown::Mardown.
After #25117, the only two remaining use-cases were rendering git commit
messages (which are arguably not really markdown) and the signature help
(which is definitely not markdown).
Updated the former to use the new markdown component, and the latter to
do syntax highlighting manually.
Release Notes:
- Allow selecting the commit message in git commits
Closes#22610
This PR fixes the invisible scroll thumb or very tiny scroll thumb when
viewing long or wide files.
The difference between `track_bounds` (imagine scrollbar total height)
and `thumb_size` is the remaining area, which maps to the total height
of the page for scrolling to work as expected. This is already accounted
for. That means we can adjust the thumb size as needed, and the
remaining height/width will be mapped correctly.
So, we can simply use define a minimum size for the thumb and handle
cases where the track bounds are smaller than the defined minimum size.
In such cases, the scrollbar will take up the full height/width of the
track bounds. This is handled mainly to avoid panics in extreme edge
cases. Practically, at such small heights/widths, users are unlikely to
attempt scrolling.
Before:
https://github.com/user-attachments/assets/cf2edf03-8b9a-4678-b3c6-9dcbd01e5db8
After:
https://github.com/user-attachments/assets/e9496a44-3e7d-4be7-b892-2762cccd9959
Release Notes:
- Fixed issue where scroll thumb was invisible or too small when viewing
long or wide files.
This reverts commit 9ef0501853 due to a
panic.
```
{
"thread": "main",
"payload": "9 is not a valid char boundary in path \"crates/…/LiveKitBridge/\"",
"location_data": {
"file": "crates/file_finder/src/file_finder.rs",
"line": 646
}
}
```
Release Notes:
- N/A
When selecting text, it highlights all matching occurences along with
selected text itself. This causes highlight overlap, which looks bit
odd. This PR fixes it.
Bonus:
Context: We have an edge case (which we already cover) where we don’t
want to clear `SelectedTextHighlight` every time the selection changes.
This happens when you are dragging the selection across some word, if
you clear it directly on selection change, due to debounce wait, the
highlight take some time to appear, which causes flickering for the
user. We solve this by not clearing it directly but only clearing it
when a new selection is found. This avoids the flicker.
However, we also need to clear the selection even before the debounce
wait if we detect early on that the selection is different from previous
ones. Otherwise, the user will have to wait until the debounce time to
see it cleared on the screen.
The code for this is a little repetitive because we check the buffer
state both before and after the debounce. But this is necessary.
---
Before:
Notice overlapping corners and selected text is bit darker in this case.
After:
Release Notes:
- N/A
Closes#18641
Contributes: #13194
Release Notes:
- Open LSP documentation file links in Zed not the system opener
- Render completion documentation markdown consistently with
documentation markdown
Done automatically with
> ast-grep -p '$A.background_executor().spawn($B)' -r
'$A.background_spawn($B)' --update-all --globs "\!crates/gpui"
Followed by:
* `cargo fmt`
* Unexpected need to remove some trailing whitespace.
* Manually adding imports of `gpui::{AppContext as _}` which provides
`background_spawn`
* Added `AppContext as _` to existing use of `AppContext`
Release Notes:
- N/A
