We weren't showing the keybinding in none of the places where the model
selector was visible. Also, I took advantage of the opportunity to
change the keybinding for two reasons:
1. `cmd-shift-m` caused conflict if on an editor (inline assistant case)
2. `cmd-opt-/` is the one Cursor uses; so consistency with something
that might be already consolidated sounds like a low-hanging fruit
| Editor Inline Assist | Terminal Inline Assist | Assistant Panel |
|--------|--------|--------|
| <img width="1336" alt="Screenshot 2025-01-10 at 11 01 24 AM"
src="https://github.com/user-attachments/assets/0782f217-025f-4bc0-b2fa-64b3524c968b"
/> | <img width="1336" alt="Screenshot 2025-01-10 at 11 01 29 AM"
src="https://github.com/user-attachments/assets/d05a3b5c-33fd-4593-b1d8-aa9944de816a"
/> | <img width="1336" alt="Screenshot 2025-01-10 at 11 01 33 AM"
src="https://github.com/user-attachments/assets/8cb075e7-ccde-46f5-aa05-d20a9d42b286"
/> |
Release Notes:
- N/A
The context picker will now display up to 6 recent files/threads to add
as a context:
<img
src="https://github.com/user-attachments/assets/80c87bf9-70ad-4e81-ba24-7a624378b991"
width=400>
Note: We decided to use a `ContextMenu` instead of `Picker` for the
initial one since the latter didn't quite fit the design for the
"Recent" section.
Release Notes:
- N/A
---------
Co-authored-by: Danilo <danilo@zed.dev>
Co-authored-by: Piotr <piotr@zed.dev>
Co-authored-by: Nathan <nathan@zed.dev>
Follow-up of https://github.com/zed-industries/zed/pull/22866
Added a config option to the markdown renderer to omit code copying
buttons, and used those for editor hover popovers.
Such popovers are quite frequent in language servers' hover responses,
e.g. rust-analyzer on `.clone()` hover may respond with
```
{"jsonrpc":"2.0","id":119,"result":{"contents":{"kind":"markdown","value":"\n```rust\nalloc::string::String\n```\n\n```rust\nfn clone(&self) -> Self\n```\n\n---\n\nReturns a copy of the value.\n\n# Examples\n\n```rust\nlet hello = \"Hello\"; // &str implements Clone\n\nassert_eq!(\"Hello\", hello.clone());\n```"},"range":{"start":{"line":518,"character":24},"end":{"line":518,"character":29}}}}
```
(note multiple code blocks sent)
Sounds that editor has either to use a different way to copy popover's
data (so the entire text gets copied, not just its code blocks), or at
least better handle hover popover's hovering to show the button.
Release Notes:
- N/A
* Now loads context on background threads.
- For file and directory context, buffer ropes can be shared between
threads as they are immutable. This allows for traversal and
accumulation of buffer text on a background thread.
- For url context, the request, parsing, and rendering is now done on a
background thread.
* Prepares for support of buffer reload by individually storing the text
of directory buffers.
* Avoids some string copying / redundant strings.
- When attaching message context, no longer builds a string for each
context type.
- For directory context, does not build a `SharedString` for the full
text, instead has a slice of `SharedString` chunks which are then
directly appended to the message context.
- Building a fenced codeblock for a buffer now computes a precise
capacity in advance.
Release Notes:
- N/A
I'm hoping this will bring more visibility to issues related to keeping
track of what version of code the LSP has:
* I've seen diagnostic ranges not appearing in the correct places.
* There have also been reports of edits from language servers
misapplying. This might bring more visibility to the issue - it doesn't
seem good to silently use the current version of the buffer.
Release Notes:
- N/A
Before this change it was using the same multibuffer point ranges in
every buffer, which only worked correctly for singleton buffers.
Release Notes:
- Fixed handling of selection ranges when formatting selections within a
multibuffer.
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
This PR adds an error toast that will be displayed when installing a dev
extension fails.
Here's what it looks like:
<img width="1310" alt="Screenshot 2025-01-09 at 11 56 42 AM"
src="https://github.com/user-attachments/assets/b65eb9f9-c559-4b99-b64a-ee301fa9e443"
/>
<img width="1310" alt="Screenshot 2025-01-09 at 12 10 30 PM"
src="https://github.com/user-attachments/assets/f4880221-2ed9-4bb0-9d48-1cb29c2b483f"
/>
I did have to touch the workspace `ErrorMessagePrompt` component to make
it scroll for long messages. I don't anticipate this being a problem for
other classes of errors (if anything, I suspect other long errors will
become more usable now).
Closes#21237.
Release Notes:
- Added an error toast that is shown when a dev extension fails to
install.
This PR fixes the duplicated `Fix with Assistant` code actions that were
being shown in the code actions menu.
This fix isn't 100% ideal, as there is an edge case in buffers that are
already open when the workspace loads, as we may not observe the feature
flags in time to register the code action providers by the time we
receive the event that an item was added to the workspace.
Closes https://github.com/zed-industries/zed/issues/22400.
Release Notes:
- Fixed duplicate "Fix with Assistant" entries showing in the code
action list.
When displaying the number of matches in the branch picker during a
search, don't count the "create new branch" option as a match, since it
only appears when _no_ existing branches are found.
<img width="530" alt="Screenshot 2025-01-09 at 12 17 30"
src="https://github.com/user-attachments/assets/c4e6ac6f-d842-4b2f-a3af-ec28c9d90f0a"
/>
Closes#22905.
Release Notes:
- Fixed result count in branch picker searches.
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This PR fixes the incorrect filename for the extension manifest being
used in an error message.
It should be `extension.toml` and not `extension.json`.
Release Notes:
- N/A
This PR is an alternate version of
https://github.com/zed-industries/zed/pull/22850, but now using a
similar approach to the existing `tab_content` and `tab_content_text`,
where `tab_tooltip_content` refers to the existing `tab_tooltip_text` if
there's no custom tooltip content/trait defined, meaning it will
simplify render the text/string content in this case.
This is all motivated by
https://github.com/zed-industries/zed/pull/21955, as we want to pull off
the ability to add custom content to a terminal tab tooltip.
Release Notes:
- N/A
This changes the behaviour of `<tab>` when inline completion is visible.
When the cursor is before the suggested indentation level, accepting a
completion should just indent.
cc @nathansobo @maxdeviant
Release Notes:
- Changed the behavior of `<tab>` at start of line when an inline
completion (Copilot, Supermaven, ...) is visible. If the cursor is
before the suggested indentation, `<tab>` now indents the line instead
of accepting the visible completion.
Co-authored-by: Antonio <antonio@zed.dev>
* Follows-up https://github.com/zed-industries/zed/pull/22224 , by
adjusting `impl PartialEq for OutlineEntryOutline` to compare outline
items' values too.
Before that, all outline items from the same excerpt were considered
equal.
Adds a test for this
* Stops re-revealing items in the outline panel, when it's focused: now,
when someone scrolls over outline panel items, there is no extra work
happening: the "revealed" item is the one scrolled to
Release Notes:
- Fixed outline items not scrolling properly
This one seems to be triggered when the assistant's
`View<ContextEditor>` is leased during the call into
`NavHistory::for_each_entry`, which then tries to read it again through
the `ItemHandle` interface. Fix it by skipping entries that can't be
read in the history iteration.
Release Notes:
- N/A
This PR adjusts the create billing subscription endpoint to prevent
initiating a checkout flow when a user has existing subscriptions that
are overdue.
A subscription is considered "overdue" when either:
- The status is `past_due`
- The status is `canceled` and the cancellation reason is
`payment_failed`
In Stripe, when a subscription has failed payment a certain number of
times, it is canceled with a reason of `payment_failed`. However, today
there is nothing stopping someone from simply creating a new
subscription without paying the outstanding invoices. With this change a
user will need to reconcile their outstanding invoices before they can
sign up for a new subscription.
Release Notes:
- N/A
This PR updates the `billing_subscriptions` in the database to record
the cancellation reason from Stripe.
We're primarily interested in this so we can check for subscriptions
that were canceled for being `past_due`.
Release Notes:
- N/A
Closes#18908
This PR started as a cleanup of redundant logic for setting up envs when
Zed is launched as a desktop entry on Linux. More on this can be read
[here](https://github.com/zed-industries/zed/pull/22335#issuecomment-2574726377).
The TLDR is that desktop entries on Linux sometimes might not have the
correct envs (as they don't `cwd` into your project directory). To
address this, we initially tried to fix it by loading the default shell
and its env vars.
However, a better solution, as recommended by @mrnugget, is to pass
`env` as `None`. Internally, if `env` is `None`, it falls back to the
project's working dir envs. This removes the need to manually load the
envs and is cleaner.
Additionally, it also fixes an issue with Zed not loading
project-specific envs because now we are actually doing so (albeit
unintentionally?).
I don't have macOS to test, but I believe this is not an issue on macOS
since it uses the Zed binary instead of the CLI, which essentially sets
the CLI `env` to `None` automatically.
Before:
Here, I have `/home/tims/go/bin` set up in `.envrc`, which only loads in
that project directory.
When launching Zed via the CLI in the project directory, notice
`/home/tims/go/bin` is in the `PATH`. As a result, we use the
user-installed `gopls` server.
```sh
[INFO] attempting to start language server "gopls", path: "/home/tims/temp/go-proj", id: 1
[INFO] using project environment variables from CLI. PATH="/home/tims/go/bin:/usr/local/go/bin"
[INFO] found user-installed language server for gopls. path: "/home/tims/go/bin/gopls", arguments: ["-mode=stdio"]
[INFO] starting language server process. binary path: "/home/tims/go/bin/gopls", working directory: "/home/tims/temp/go-proj", args: ["-mode=stdio"]
```
However, when using the desktop entry and attempting to load envs from
the default shell, notice `/home/tims/go/bin` is no longer there since
it's not in the project directory. Zed cannot find the user-installed
language server and starts downloading its own `gopls`.
```sh
[INFO] attempting to start language server "gopls", path: "/home/tims/temp/go-proj", id: 1
[INFO] using project environment variables from CLI. PATH="/usr/local/go/bin"
[INFO] fetching latest version of language server "gopls"
[INFO] downloading language server "gopls"
[INFO] starting language server process. binary path: "/home/tims/.local/share/zed/languages/gopls/gopls_0.17.1_go_1.23.4", working directory: "/home/tims/temp/go-proj", args: ["-mode=stdio"]
```
After:
When using the desktop entry, we pass the CLI env as `None`. For the
language server, it falls back to the project directory envs. Result,
Zed finds the user-installed language server.
```sh
[INFO] attempting to start language server "gopls", path: "/home/tims/temp/go-proj", id: 1
[INFO] using project environment variables shell launched in "/home/tims/temp/go-proj". PATH="/home/tims/go/bin:/usr/local/go/bin"
[INFO] found user-installed language server for gopls. path: "/home/tims/go/bin/gopls", arguments: ["-mode=stdio"]
[INFO] starting language server process. binary path: "/home/tims/go/bin/gopls", working directory: "/home/tims/temp/go-proj", args: ["-mode=stdio"]
```
Release Notes:
- Fixed issue with project-specific env not being found via .envrc
(direnv) on Linux
