Closes https://github.com/zed-industries/zed/issues/13111
Release Notes:
- vim: Added global marks `'[A-Z]`
- vim: Added persistence for global (and local) marks. When re-opening
the same workspace your previous marks will be available.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#22536
Changes:
- Visual and visual block: Cursor at start of selection.
- Visual line: Cursor at start on line.
- Uses different handling since the selection does not actually change
in vline.
Release Notes:
- vim: Fixed insert before (`shift-i`) in visual modes.
Implements [vim-exchange](https://github.com/tommcdo/vim-exchange)
functionality.
Lets you swap the content of one selection/object/motion with another.
The default key bindings are the same as in exchange:
- `cx` to begin the exchange in normal mode. Visual mode does not have a
default binding due to conflicts.
- `cxx` selects the current line
- `cxc` clears the selection
- If the previous operation was an exchange, `.` will repeat that
operation.
Closes#22759
## Overlapping regions
According to the vim exchange readme:
> If one region is fully contained within the other, it will replace the
containing region.
Zed does the following:
- If one range is completely contained within another: the smaller
region replaces the larger region (as in exchange.vim)
- If the ranges only partially overlap, then we abort and cancel the
exchange. I don't think we can do anything sensible with that. Not sure
what the original does, evil-exchange aborts.
## Not implemented: cross-window exchange
Emacs's evil-exchange allows you to exchange across buffers. There is no
code to accommodate that in this PR. Personally, it'd never occurred to
me before working on this and I've never needed it. As such, I'll leave
that implementation for whomever needs it.
As an upside; this allows you to have concurrent exchange states per
buffer, which may come in handy.
## Bonus
Also adds "replace with register" for the full line with `grr` 🐕 This
was an oversight from a previous PR.
Release notes:
- Added an implementation of `vim-exchange`
- Fixed: Added missing default key binding for `Vim::CurrentLine` for
replace with register mode (`grr`)
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#24270
Release Notes:
- Fixed an issue where doing line-wise operations in vim mode on the
last line of a file with no trailing newline would not work properly
There's still a bit more work to do on this, but this PR is compiling
(with warnings) after eliminating the key types. When the tasks below
are complete, this will be the new narrative for GPUI:
- `Entity<T>` - This replaces `View<T>`/`Model<T>`. It represents a unit
of state, and if `T` implements `Render`, then `Entity<T>` implements
`Element`.
- `&mut App` This replaces `AppContext` and represents the app.
- `&mut Context<T>` This replaces `ModelContext` and derefs to `App`. It
is provided by the framework when updating an entity.
- `&mut Window` Broken out of `&mut WindowContext` which no longer
exists. Every method that once took `&mut WindowContext` now takes `&mut
Window, &mut App` and every method that took `&mut ViewContext<T>` now
takes `&mut Window, &mut Context<T>`
Not pictured here are the two other failed attempts. It's been quite a
month!
Tasks:
- [x] Remove `View`, `ViewContext`, `WindowContext` and thread through
`Window`
- [x] [@cole-miller @mikayla-maki] Redraw window when entities change
- [x] [@cole-miller @mikayla-maki] Get examples and Zed running
- [x] [@cole-miller @mikayla-maki] Fix Zed rendering
- [x] [@mikayla-maki] Fix todo! macros and comments
- [x] Fix a bug where the editor would not be redrawn because of view
caching
- [x] remove publicness window.notify() and replace with
`AppContext::notify`
- [x] remove `observe_new_window_models`, replace with
`observe_new_models` with an optional window
- [x] Fix a bug where the project panel would not be redrawn because of
the wrong refresh() call being used
- [x] Fix the tests
- [x] Fix warnings by eliminating `Window` params or using `_`
- [x] Fix conflicts
- [x] Simplify generic code where possible
- [x] Rename types
- [ ] Update docs
### issues post merge
- [x] Issues switching between normal and insert mode
- [x] Assistant re-rendering failure
- [x] Vim test failures
- [x] Mac build issue
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Joseph <joseph@zed.dev>
Co-authored-by: max <max@zed.dev>
Co-authored-by: Michael Sloan <michael@zed.dev>
Co-authored-by: Mikayla Maki <mikaylamaki@Mikaylas-MacBook-Pro.local>
Co-authored-by: Mikayla <mikayla.c.maki@gmail.com>
Co-authored-by: joão <joao@zed.dev>
Co-Authored-By: Jon Walstedt <jon@walstedt.se>
Closes#22094
Release Notes:
- vim: Added support for ctrl-g
Co-authored-by: Jon Walstedt <jon@walstedt.se>
Closes#22885Closes#12565
This doesn't yet add history in the command palette, which is painfully
missing.
Release Notes:
- vim: Added `:!`, `:<range>!` and `:r!` support
- vim: Added `!` operator in normal/visual mode
Closes#8628
Release Notes:
- Added support for resizing the current pane using vim keybinds with
the intention to follow the functionality of vim
- "ctrl-w +" to make a pane taller
- "ctrl-w -" to make the pane shorter
- "ctrl-w >" to make a pane wider
- "ctrl-w <" to make the pane narrower
- Changed vim pre_count and post_count to globals to allow for other
crates to use the vim count. In this case, it allows for resizing by
more than one unit. For example, "10 ctrl-w -" will decrease the height
of the pane 10 times more than "ctrl-w -"
- This pr does **not** add keybinds for making all panes in an axis
equal size and does **not** add support for resizing docks. This is
mentioned because these could be implied by the original issue
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Support has been added for the ctrl-o command within insert mode. Ctrl-o
is used to partially enter normal mode for 1 motion to then return back
into insert mode.
Release Notes:
- vim: Added support for `ctrl-o` in insert mode to enter temporary
normal mode
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Performing `ysa")` on `"Hello World"` should produce `("Hello World")`.
Instead it places the parens inside the quotes (i.e. `"(Hello World)"`).
This PR fixes the behavior by preserving the `around` flag from the
operator sequence.
Closes#12976 and partially fixes#13841
Release Notes:
- Fixed the behavior of surrounding a text object in vim.
Closes#13579
A major painpoint in the Vim crate has been life-cycle management. We
used to have one global Vim instance that tried to track per-editor
state; this led to a number of subtle issues (e.g. #13579, the mode
indicator being global, and quick toggling between windows letting vim
mode's notion of the active editor get out of sync).
This PR changes the internal structure of the code so that there is now
one `Vim` instance per `Editor` (stored as an `Addon`); and the global
stuff is separated out. This fixes the above problems, and tidies up a
bunch of the mess in the codebase.
Release Notes:
* vim: Fixed accidental visual mode in project search and go to
references
([#13579](https://github.com/zed-industries/zed/issues/13579)).
### Summary
This PR adds support for count and object motions to the toggle comments
action in Vim mode. The relevant issue is
[#14337](https://github.com/zed-industries/zed/issues/14337).
For example, `2 g c j` will toggle comments three lines downward. `g c g
g` will toggle comments from the current cursor position up to the start
of the file.
Notably missing from this PR are `g c b` (toggle comments for the
current block) as well as `g c p` (toggle comments for the current
paragraph). These seem to be non-standard.
The new module `normal/toggle_comments.rs` has been copied almost
verbatim from `normal/indent.rs`. Maybe that ought to be abstracted over
but I feel I lack the overview.
Release Notes:
- vim: Added support for count and object motion to the toggle comments
action ([#14337](https://github.com/zed-industries/zed/issues/14337)).
These were previously passed directly to the editor module, which knows
nothing about vim counts. Instead, implement new actions in the vim
module which take the count and use it to invoke the corresponding
action in the editor module, properly repeated.
Release Notes:
- Fixed vim undo and redo commands not taking counts.
Fixing the "r" action just involved adapting `normal_replace` to replace
multiple characters.
Fixing the "shift-r" command was less straightforward. The bindings for
`vim::BeforeNormal` in replace mode were being overwritten and several
other steps required for action repetition were not performed. Finally,
the cursor adjustment after re-entering normal mode was duplicated
(`vim::BeforeNormal` was now triggered correctly) so I removed the
special case for replace mode.
Release Notes:
- Fixed vim "r" action to accept a count argument
- Fixed vim "shift-r" action to accept a count argument and allow
repetition
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Release Notes:
- vim: Fix `gi` when the insert ended at the end of a line (#12162)
- vim: Add `gv` to restore previous visual selection (#12888)
- vim: Fix `gl` when the first match is at the end of a line
This cleans up the neovim-backed vim tests:
- removed exempted tests (we'll rely on bug reports to find missing edge
cases)
- moved all assertions into non-async fn's so that failures are
reporting on the right file/line
- removed the NeovimBackedBindingTestContext
- renamed a few things to make them clearer
- reduced the number of permutations tested in some cases to reduce
slowest test from 60s to 5s
Release Notes:
- N/A
Part of https://github.com/zed-industries/zed/issues/8081
To avoid confusion and bugs when converting between various row `u32`'s,
use different types for each.
Further PRs should split `Point` into buffer and multi buffer variants
and make the code more readable.
Release Notes:
- N/A
---------
Co-authored-by: Piotr <piotr@zed.dev>
Release Notes:
- vim: Added support for buffer-local marks (`'a-'z`) and some builtin
marks `'<`,`'>`,`'[`,`']`, `'{`, `'}` and `^`. Global marks (`'A-'Z`),
and other builtin marks (`'0-'9`, `'(`, `')`, `''`, `'.`, `'"`) are not
yet implemented. (#5122)
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
For #4965
There are still some minor issues:
1. When change the surround and delete the surround, we should also
decide whether there are spaces inside after deleting/replacing
according to whether it is open parentheses, and replace them
accordingly, but at present, delete and change, haven't done this
adaptation for current pr, I'm not sure if I can fit it in the back or
if it needs to be fitted together.
2. In the selection mode, pressing s plus brackets should also trigger
the Add Surrounds function, but this MR has not adapted the selection
mode for the time being, I think we need to support different add
behaviors for the three selection modes.(Currently in select mode, s is
used for Substitute)
3. For the current change surrounds, if the user does not find the
bracket that needs to be matched after entering cs, but it is a valid
bracket, and will wait for the second input before failing, the better
practice here should be to return to normal mode if the first bracket is
not found
4. I reused BracketPair in language, but two of its properties weren't
used in this mr, so I'm not sure if I should create a new struct with
only start and end, which would have less code
I'm not sure which ones need to be changed in the first issue, and which
ones can be revised in the future, and it seems that they can be solved
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
I found that there may be some minor problems here, in editor.edit may
be more dependent on the order of operations, if the same set of
operations, different execution orders may lead to some different
results, so maybe we need to use BTreeSet instead of HashSet, because
HashSet may not be able to ensure that the same set of data order is
consistent, but maybe my worries are too much
Release notes:
- N/A
I'm not sure how compliant you're aiming to be with vim, but the `f`
behavior is more useful when it can search on multiple lines instead of
a single one, so I'd like to propose this change.
This change is quite frequent in vim/neovim as a plugin (e.g.
[clever-f](https://github.com/VSCodeVim/Vim),
[improved-ft](https://github.com/backdround/improved-ft.nvim), etc), and
in other vim emulations (e.g.
[vscode-vim](https://github.com/VSCodeVim/Vim)).
Release Notes:
- vim: Added a setting to control default clipboard behaviour. `{"vim":
{"use_system_clipboard": "never"}}` disables writing to the clipboard.
`"on_yank"` writes to the system clipboard only on yank, and `"always"`
preserves the current behavior. ([#4390
](https://github.com/zed-industries/zed/issues/4390))
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
