Closes#29176
This PR fix an issue where uncommenting a code block in Markdown would
add Markdown comments instead of removing the language-specific
comments.
Why?
`language_scope_at` for comments in a code block in Markdown would
result in the language being detected as Markdown. This happens because
the smallest range, such as `//` or `#` on the Markdown layer, is
preferred over `// whole comment line` for any other language. This
results in language detection as Markdown for that point.
To fix this, we also use a depth factor and try to prefer the layer with
greater depth over one with lesser depth. In this case, the code block's
language depth would be preferred over Markdown. The smallest range is
now used as a tiebreaker.
Added test for this case.
Release Notes:
- Fixed issue where uncommenting a code block in Markdown would add
Markdown comments instead of removing the language comments.
### DISCLAIMER
> As of 6th March 2025, debugger is still in development. We plan to
merge it behind a staff-only feature flag for staff use only, followed
by non-public release and then finally a public one (akin to how Git
panel release was handled). This is done to ensure the best experience
when it gets released.
### END OF DISCLAIMER
**The current state of the debugger implementation:**
https://github.com/user-attachments/assets/c4deff07-80dd-4dc6-ad2e-0c252a478fe9https://github.com/user-attachments/assets/e1ed2345-b750-4bb6-9c97-50961b76904f
----
All the todo's are in the following channel, so it's easier to work on
this together:
https://zed.dev/channel/zed-debugger-11370
If you are on Linux, you can use the following command to join the
channel:
```cli
zed https://zed.dev/channel/zed-debugger-11370
```
## Current Features
- Collab
- Breakpoints
- Sync when you (re)join a project
- Sync when you add/remove a breakpoint
- Sync active debug line
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Restart stack frame (if adapter supports this)
- Variables
- Loaded sources
- Modules
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Debug console
- Breakpoints
- Log breakpoints
- line breakpoints
- Persistent between zed sessions (configurable)
- Multi buffer support
- Toggle disable/enable all breakpoints
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Show collapsed stack frames
- Restart stack frame (if adapter supports this)
- Loaded sources
- View all used loaded sources if supported by adapter.
- Modules
- View all used modules (if adapter supports this)
- Variables
- Copy value
- Copy name
- Copy memory reference
- Set value (if adapter supports this)
- keyboard navigation
- Debug Console
- See logs
- View output that was sent from debug adapter
- Output grouping
- Evaluate code
- Updates the variable list
- Auto completion
- If not supported by adapter, we will show auto-completion for existing
variables
- Debug Terminal
- Run custom commands and change env values right inside your Zed
terminal
- Attach to process (if adapter supports this)
- Process picker
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Disconnect
- Restart
- Stop
- Warning when a debug session exited without hitting any breakpoint
- Debug view to see Adapter/RPC log messages
- Testing
- Fake debug adapter
- Fake requests & events
---
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
Co-authored-by: Piotr <piotr@zed.dev>
Follow-up of https://github.com/zed-industries/zed/pull/26410
* Extract word completions into their own, `editor::ShowWordCompletions`
action so those could be triggered independently of completions
* Assign `ctrl-shift-space` binding to this new action
* Still keep words returned along the completions as in the original PR,
but:
* Tone down regular completions' fallback logic, skip words when the
language server responds with empty list of completions, but keep on
adding words if nothing or an error were returned instead
* Adjust the defaults to wait for LSP completions infinitely
* Skip "words" with digits such as `0_usize` or `2.f32` from completion
items, unless a completion query has digits in it
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/4957https://github.com/user-attachments/assets/ff491378-376d-48ec-b552-6cc80f74200b
Adds `"completions"` language settings section, to configure LSP and
word completions per language.
Word-based completions may be turned on never, always (returned along
with the LSP ones), and as a fallback if no LSP completion items were
returned.
Future work:
* words are matched with the same fuzzy matching code that the rest of
the completions are
This might worsen the completion menu's usability even more, and will
require work on better completion sorting.
* completion entries currently have no icons or other ways to indicate
those are coming from LSP or from word search, or from something else
* we may work with language scopes more intelligently, group words by
them and distinguish during completions
Release Notes:
- Supported word-based completions
---------
Co-authored-by: Max Brunsfeld <max@zed.dev>
Closes https://github.com/zed-industries/zed/issues/24914 (again)
Release Notes:
- Fixed an issue where multi-line pasted content was auto-indented
incorrectly if copied from the middle of an existing line.
Closes: #25556
We were always comparing `disabled_globs` against the relative file
path, we'll now use the absolute path if the glob is also absolute.
Release Notes:
- Support absolute globs in `edit_predictions.disabled_globs`
Closes#12064
It feels a bit strange to use `brackets` for this but it seems to work
without unintended consequences from my testing so far.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Closes https://github.com/zed-industries/zed/issues/10122
Closes https://github.com/zed-industries/zed/issues/25034
When formatting buffers or reloading them after they change on disk, we
performed a diff between the buffer's current contents and the new
content. We need this diff in order preserve the positions of cursors
and other decorations when updating the buffer's text.
In order to handle changes within lines, we would previously compute a
*character-wise* diff. This was extremely expensive for large files.
This PR gets rid of the character-wise diff, and instead performs a
normal line-wise diff. Then, for certain replace hunks, we compute a
secondary word-based diff. Also, I've switched to the
[`imara-diff`](https://github.com/pascalkuthe/imara-diff) crate, instead
of `similar`.
Release Notes:
- Fixed a hang that could occur when large files were changed on disk or
formatted.
There's still a bit more work to do on this, but this PR is compiling
(with warnings) after eliminating the key types. When the tasks below
are complete, this will be the new narrative for GPUI:
- `Entity<T>` - This replaces `View<T>`/`Model<T>`. It represents a unit
of state, and if `T` implements `Render`, then `Entity<T>` implements
`Element`.
- `&mut App` This replaces `AppContext` and represents the app.
- `&mut Context<T>` This replaces `ModelContext` and derefs to `App`. It
is provided by the framework when updating an entity.
- `&mut Window` Broken out of `&mut WindowContext` which no longer
exists. Every method that once took `&mut WindowContext` now takes `&mut
Window, &mut App` and every method that took `&mut ViewContext<T>` now
takes `&mut Window, &mut Context<T>`
Not pictured here are the two other failed attempts. It's been quite a
month!
Tasks:
- [x] Remove `View`, `ViewContext`, `WindowContext` and thread through
`Window`
- [x] [@cole-miller @mikayla-maki] Redraw window when entities change
- [x] [@cole-miller @mikayla-maki] Get examples and Zed running
- [x] [@cole-miller @mikayla-maki] Fix Zed rendering
- [x] [@mikayla-maki] Fix todo! macros and comments
- [x] Fix a bug where the editor would not be redrawn because of view
caching
- [x] remove publicness window.notify() and replace with
`AppContext::notify`
- [x] remove `observe_new_window_models`, replace with
`observe_new_models` with an optional window
- [x] Fix a bug where the project panel would not be redrawn because of
the wrong refresh() call being used
- [x] Fix the tests
- [x] Fix warnings by eliminating `Window` params or using `_`
- [x] Fix conflicts
- [x] Simplify generic code where possible
- [x] Rename types
- [ ] Update docs
### issues post merge
- [x] Issues switching between normal and insert mode
- [x] Assistant re-rendering failure
- [x] Vim test failures
- [x] Mac build issue
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Joseph <joseph@zed.dev>
Co-authored-by: max <max@zed.dev>
Co-authored-by: Michael Sloan <michael@zed.dev>
Co-authored-by: Mikayla Maki <mikaylamaki@Mikaylas-MacBook-Pro.local>
Co-authored-by: Mikayla <mikayla.c.maki@gmail.com>
Co-authored-by: joão <joao@zed.dev>
Closes#12553
* [x] Fix `diff_hunk_before`
* [x] Fix failure to show deleted text when expanding hunk w/ cursor on
second line of the hunk
* [x] Failure to expand diff hunk below the cursor.
* [x] Delete the whole file, and expand the diff. Backspace over the
deleted hunk, panic!
* [x] Go-to-line now counts the diff hunks, but it should not
* [x] backspace at the beginning of a deleted hunk deletes too much text
* [x] Indent guides are rendered incorrectly
* [ ] Fix randomized multi buffer tests
Maybe:
* [ ] Buffer search should include deleted text (in vim mode it turns
out I use `/x` all the time to jump to the next x I can see).
* [ ] vim: should refuse to switch into insert mode if selection is
fully within a diff.
* [ ] vim `o` command when cursor is on last line of deleted hunk.
* [ ] vim `shift-o` on first line of deleted hunk moves cursor but
doesn't insert line
* [x] `enter` at end of diff hunk inserts a new line but doesn't move
cursor
* [x] (`shift-enter` at start of diff hunk does nothing)
* [ ] Inserting a line just before an expanded hunk collapses it
Release Notes:
- Improved diff rendering, allowing you to navigate with your cursor
inside of deleted text in diff hunks.
---------
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Cole <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Michael <michael@zed.dev>
Co-authored-by: Agus <agus@zed.dev>
Co-authored-by: João <joao@zed.dev>
Closes#9656. Continuation of #9654, but with the addition of backwards
compatibility for the existing captures.
Release Notes:
- Improved Tree-sitter support with added compatibility for standard
injections captures
---------
Co-authored-by: Finn Evers <finn.evers@outlook.de>
This is quite experimental and untested in languages other than Rust.
It's written to attempt to do something sensible in many languages. Due
to its experimental nature, just releasing to staff, and so not
including it in release notes. Future release note might be "Improved
diagnostic excerpts by using syntactic info to determine the context
lines to show."
Release Notes:
- N/A
This is a pure refactor of our Git diff state management. Buffers are no
longer are associated with one single diff (the unstaged changes).
Instead, there is an explicit project API for retrieving a buffer's
unstaged changes, and the `Editor` view layer is responsible for
choosing what diff to associate with a buffer.
The reason for this change is that we'll soon want to add multiple "git
diff views" to Zed, one of which will show the *uncommitted* changes for
a buffer. But that view will need to co-exist with other views of the
same buffer, which may want to show the unstaged changes.
### Todo
* [x] Get git gutter and git hunks working with new structure
* [x] Update editor tests to use new APIs
* [x] Update buffer tests
* [x] Restructure remoting/collab protocol
* [x] Update assertions about staged text in
`random_project_collaboration_tests`
* [x] Move buffer tests for git diff management to a new spot, using the
new APIs
Release Notes:
- N/A
---------
Co-authored-by: Richard <richard@zed.dev>
Co-authored-by: Cole <cole@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
Co-Authored-By: Max <max@zed.dev>
Release Notes:
- vim: Added motions `[[`, `[]`, `]]`, `][` for navigating by section,
`[m`, `]m`, `[M`, `]M` for navigating by method, and `[*`, `]*`, `[/`,
`]/` for comments. These currently only work for languages built in to
Zed, as they are powered by new tree-sitter queries.
- vim: Added new text objects: `ic`, `ac` for inside/around classes,
`if`,`af` for functions/methods, and `g c` for comments. These currently
only work for languages built in to Zed, as they are powered by new
tree-sitter queries.
---------
Co-authored-by: Max <max@zed.dev>
* Make `description` optional (since we describe it as optional in the
prompt, and we're currently not showing it)
* Fix fuzzy location bug that neglected the cost of deleting prefixes of
the query.
* Make auto-indent work for single-line edits. Previously, auto-indent
would not occur when overwriting a single line (without inserting or
deleting a newline)
Release Notes:
- N/A
This fixes problems where auto-indent wasn't working correctly for
assistant edits.
Release Notes:
- Fixed a bug where auto-indent didn't work correctly when pasting with
multiple cursors on adjacent lines
Co-authored-by: Marshall <marshall@zed.dev>
* `Open Excerpts` command always opens the locations in the base buffer
* LSP features like document-highlights, go-to-def, and inlay hints work
correctly in branch buffers
* Other LSP features like completions, code actions, and rename are
disabled in branch buffers
Release Notes:
- N/A
This PR adds some more functionality to the Proposed Changes Editor
view, which we'll be using in
https://github.com/zed-industries/zed/pull/18240 for allowing the
assistant to propose changes to a set of buffers.
* Add an `Apply All` button, and fully implement applying of changes to
the base buffer
* Make the proposed changes editor searchable
* Fix a bug in branch buffers' diff state management
Release Notes:
- N/A
This PR introduces functionality for creating *branches* of buffers that
can be used to preview and edit change sets that haven't yet been
applied to the buffers themselves.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Marshall <marshall@zed.dev>
This PR makes the `Buffer::apply_ops` method infallible for
`text::Buffer` and `language::Buffer`.
We discovered that `text::Buffer::apply_ops` was only fallible due to
`apply_undo`, which didn't actually need to be fallible.
Release Notes:
- N/A
Fixes https://github.com/zed-industries/zed/issues/5291
Release Notes:
- Fixed a bug where the 'toggle comments' command didn't use the right
comment syntax in JSX and TSX elements.
---------
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
/cc @mrnugget
Release Notes:
- Fixed an issue where toggling inline completions in a markdown file
did not work correctly
---------
Co-authored-by: Marshall <marshall@zed.dev>
Closes#15860
Since rust std now supports LazyLock replacing lazy_static with it
reduce the external dependency.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This PR opens workflow step editors as preview tabs and closes them upon
exiting the step if they are still in preview mode and they weren't
already open before entering the step.
Making this work was tricky, because we often edit the buffer as part of
displaying the workflow step suggestions to create empty lines where we
can generate. We undo these edits if the transformation is not applied,
but they were causing the preview to be dismissed.
After trying a few approaches, I decided to give workspace `Item`s a
`preserve_preview` method that defaults to false. When the workspace
sees an edit event for the item, it checks if the item wants to preserve
its preview. For buffers, after editing, you can call `refresh_preview`,
which sets a preview version to the current version of the buffer. Any
edits after this version will cause preview to not be preserved.
One final issue is with async auto-indent. To ensure these async edits
don't dismiss the preview, I automatically refresh the preview version
if preview was preserved prior to performing the auto-indent. The
assumption is that these are edits created by other edits, and if we
didn't want to dismiss the preview with the originating edits, then the
auto-indent edits shouldn't dismiss it either.
Release Notes:
- N/A
---------
Co-authored-by: Jason <jason@zed.dev>
Closes https://github.com/zed-industries/zed/issues/4565
To fix issues with code blocks' parsing in Markdown, a
tree-sitter-markdown library update is needed.
But `tree_sitter::language` is used in many places within core Zed,
which forced more library updates.
Release Notes:
- Updated tree-sitter parsers for core languages
---------
Co-authored-by: Max Brunsfeld <max@zed.dev>
Co-authored-by: Piotr Osiewicz <piotr@zed.dev>
This is a first step towards allowing you to edit remote projects
directly over SSH. We'll start with a pretty bare-bones feature set, and
incrementally add further features.
### Todo
Distribution
* [x] Build nightly releases of `zed-remote-server` binaries
* [x] linux (arm + x86)
* [x] mac (arm + x86)
* [x] Build stable + preview releases of `zed-remote-server`
* [x] download and cache remote server binaries as needed when opening
ssh project
* [x] ensure server has the latest version of the binary
Auth
* [x] allow specifying password at the command line
* [x] auth via ssh keys
* [x] UI password prompt
Features
* [x] upload remote server binary to server automatically
* [x] opening directories
* [x] tracking file system updates
* [x] opening, editing, saving buffers
* [ ] file operations (rename, delete, create)
* [ ] git diffs
* [ ] project search
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Note that this shouldn't have any visible user-facing behavior yet. The
feature is incomplete but we wanna merge early to avoid a long-running
branch.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
