Closes#30017
* While generating the settings JSON schema, defaults all schema
definitions to reject unknown fields via `additionalProperties: false`.
* Uses `unevaluatedProperties: false` at the top level to check fields
that remain after the settings field names + release stage override
field names.
* Changes json schema version from `draft07` to `draft_2019_09` to have
support for `unevaluatedProperties`.
Release Notes:
- Added warnings for unknown fields when editing `settings.json`.
The major change in schemars 1.0 is that now schemas are represented as
plain json values instead of specialized datatypes. This allows for more
concise construction and manipulation.
This change also improves how settings schemas are generated. Each top
level settings type was being generated as a full root schema including
the definitions it references, and then these were merged. This meant
generating all shared definitions multiple times, and might have bugs in
cases where there are two types with the same names.
Now instead the schemar generator's `definitions` are built up as they
normally are and the `Settings` trait no longer has a special
`json_schema` method. To handle types that have schema that vary at
runtime (`FontFamilyName`, `ThemeName`, etc), values of
`ParameterizedJsonSchema` are collected by `inventory`, and the schema
definitions for these types are replaced.
To help check that this doesn't break anything, I tried to minimize the
overall [schema
diff](https://gist.github.com/mgsloan/1de549def20399d6f37943a3c1583ee7)
with some patches to make the order more consistent + schemas also
sorted with `jq -S .`. A skim of the diff shows that the diffs come
from:
* `enum: ["value"]` turning into `const: "value"`
* Differences in handling of newlines for "description"
* Schemas for generic types no longer including the parameter name, now
all disambiguation is with numeric suffixes
* Enums now using `oneOf` instead of `anyOf`.
Release Notes:
- N/A
Stop doing useless prettier-related work when doing a project search.
Before, project search might cause
<img width="1728" alt="not_pretty"
src="https://github.com/user-attachments/assets/5f8b935f-962d-488e-984f-50dfbaee97ba"
/>
but now we debounce the prettier-related task first, and actually set
the "installed" state for the default prettier, when there's no install
needed.
Release Notes:
- N/A
Previously we would always run `maintain_servers` even if the settings
did not change. While this would not cause any MCP servers to restart,
we would still go through all configured servers and call the
`command(...)` function on each installed MCP extension. This can cause
lots of logs to show up when an MCP server is not configured correctly.
Release Notes:
- N/A
Follow-up to #32852. This time we'll check if the debug session is
initialized before querying threads.
Release Notes:
- Fix Zed's debugger issuing threads request before it is allowed to do
so per DAP specification.
Closes https://github.com/zed-industries/zed/issues/33575
* Fixes inlay colors spoiled after document color displayed
* Optimizes the query pattern for large multi buffers
Release Notes:
- Fixed document colors issues with other inlays and multi buffers
Closes https://github.com/zed-industries/zed/issues/33522
Turns out a bunch of Zed requests were not checking their capabilities
correctly, due to odd copy-paste and due to default that assumed that
the capabilities are met.
Adjust the code, which includes the document colors, add the test on the
colors case.
Release Notes:
- Fixed excessive document colors requests for unrelated files
Follow-up of https://github.com/zed-industries/zed/pull/32490
The tool still looks like designed by professional developers, and still
may change its UX based on the internal feedback.
Release Notes:
- N/A
## Context
To support inline values a language will have to implement their own
provider trait that walks through tree sitter nodes. This is overly
complicated, hard to accurately implement for each language, and lacks
proper extension support.
This PR switches to a singular inline provider that uses a language's
`debugger.scm` query field to capture variables and scopes. The inline
provider is able to use this information to generate inlays that take
scope into account and work with any language that defines a debugger
query file.
### Todos
- [x] Implement a utility test function to easily test inline values
- [x] Generate inline values based on captures
- [x] Reimplement Python, Rust, and Go support
- [x] Take scope into account when iterating through variable captures
- [x] Add tests for Go inline values
- [x] Remove old inline provider code and trait implementations
Release Notes:
- debugger: Generate inline values based on a language debugger.scm file
This PR addresses to fix (#31308) a race condition where auto-indent (in
buffer.cs) and on-type-formatting (in lsp_store.rs) concurrently
calculate indentation using the same buffer snapshot.
Previous Solution (Abandoned):
https://github.com/zed-industries/zed/pull/31340
Final Solution:
Delay applying on-type-formatting until auto-indent is complete.
Issue:
If AutoindentMode finishes first, formatting works correctly. If
"Formatting on typing" starts before AutoindentMode completes, it
results in double indentation.
Closes#31308
Release Notes:
- Fixed a race condition resulting in incorrect buffer contents when combining auto-indent and on-type-formatting
Before this PR force quitting Zed would leave hanging debug adapter
processes and not allow debug adapters to clean up their sessions
properly.
This PR fixes this problem by sending a disconnect/terminate to all
debug adapters and force shutting down their processes after they
respond.
Co-authored-by: Cole Miller \<cole@zed.dev\>
Release Notes:
- debugger: Shutdown and clean up debug processes when force quitting
Zed
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Custom arguments replace any arguments that we normally pass to the DAP.
For interpreted languages, they are passed to the interpreter after the
DAP path or module. They can be combined with a custom binary, or you
can omit `dap.binary` and just customize the arguments to the DAPs we
download.
This doesn't take care of updating the extension API to support custom
arguments.
Release Notes:
- debugger: Implemented support for passing custom arguments to a debug
adapter binary using the `dap.args` setting.
- debugger: Fixed not being able to use the `dap` setting in
`.zed/settings.json`.
I don't have a concrete misbehavior from it, but this update of
`insert_range` doesn't make sense for two reasons:
* If the resolved completion doesn't have a new `text_edit` it would
clear out the `insert_range`.
* It doesn't update the completion if it has already been resolved,
except this update of `insert_range` happened before that.
Guessing it was written this way because this field needed to only be
mutated within the `CompletionSource::Lsp` case and this was a
convenient match below.
Release Notes:
- N/A
Co-authored-by: Smit <smit@zed.dev>
Closes#33106
Instead of directly using `filter_text` in `StringMatchCandidate`, which
yields better results for fuzzy matching but messes up with highlighting
letters in bold, as `positions` list generated by fuzzy crate are now of
`filter_text` and not `label` shown to the user.
This PR fixes it by keeping use of `filter_range` in
`StringMatchCandidate`, which is range w.r.t to `label` shown to user.
And actually generating this `filter_range` at source by using
`filter_range` if exists.
- [x] Tests
Release Notes:
- Fixed issue where incorrect letters are marked as bold in completions.
- [x] Show disabled MCP servers in the list so you can enable them again
- [x] If MCP is not present in the settings, add it
Closes #ISSUE
Release Notes:
- agent: Allow to enable/disable context servers permanently in the
agent configuration view
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
### This PR introduces support for adding watchers to specific
expressions (such as variable names or evaluated expressions).
This feature is useful in scenarios where many variables are in scope,
but only a few are of interest—especially when tracking variables that
change frequently. By allowing users to add watchers, it becomes easier
to monitor the values of selected expressions across stack frames
without having to sift through a large list of variables.
https://github.com/user-attachments/assets/c49b470a-d912-4182-8419-7406ba4c8f1e
------
**TODO**:
- [x] make render variable code reusable for render watch method
- [x] use SharedString for watches because of a lot of cloning
- [x] add tests
- [x] basic test
- [x] test step debugging
Release Notes:
- Debugger Beta: Add support for variable watchers
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Variable list wasn't notified when a set variable value request was
successfully. This caused the variable list and inline values to show
stale data in some cases, which this PR fixes.
Release Notes:
- debugger: Fix bug where setting a variable's value wouldn't update the
variable list or inline values
- [x] Pass in cwd
- [x] Use the appropriate package manager
- [x] Don't mix up package.json and composer.json
Release Notes:
- debugger: Fixed wrong arguments being passed to the DAP when debugging
scripts from package.json.
Still a work in progress! Todos before merging:
- [x] Allow to delete (not just turn off) an MCP server from the panel's
settings view
- [x] Also uninstall the extension upon deleting the server (check if
the extension just provides MCPs)
- [x] Resolve repository URL again
- [x] Add a button to open the configuration modal from the panel's
settings view
- [x] Improve modal UX to install and configure a non-extension MCP
Release Notes:
- N/A
---------
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
Release Notes:
- New session modal for a debugger will now show tasks from package.json
as debuggable scenarios
---------
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Todo:
* [x] Open diffed files as regular buffers
* [x] Update diff when buffers change
* [x] Show diffed filenames in the tab title
* [x] Investigate why syntax highlighting isn't reliably handled for old
text
* [x] remove unstage/restore buttons
Release Notes:
- Adds `zed --diff A B` to show the diff between the two files
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
Co-authored-by: Agus Zubiaga <agus@zed.dev>
- Don't assume all located tasks come from our test runnables
- Run tests from the right working directory
- Scope forking behavior customization for jest and vitest more tightly,
to just our test runnables
- Standardize on `$PACKAGE_MANAGER exec -- $TEST_LIBRARY ...` to fix
runnables not working with npm
Release Notes:
- Debugger Beta: Fixed issues with debugging tasks from package.json and
test runnables.
https://github.com/user-attachments/assets/ad0fa304-e4fb-4598-877d-c02141f35d6f
Closes https://github.com/zed-industries/zed/issues/4678
Also adds the code to support `textDocument/colorPresentation`
counterpart that serves as a resolve mechanism for the document colors.
The resolve itself is not run though, and the editor does not
accommodate color presentations in the editor yet — until a well
described use case is provided.
Use `lsp_document_colors` editor settings to alter the presentation and
turn the feature off.
Release Notes:
- Start showing inline previews for LSP document colors
Before this change, we would see "connection reset" when sending the
initialize
request over SSH in the case that the debug adapter was slow to boot.
(Although we'd have successfully created a connection to the local SSH
port,
trying to read/write from it would not work until the remote end of the
connection had been established)
Fixes #32575
Release Notes:
- debugger: Fix connecting to a Python debugger over SSH
- [x] foreground highlights
- [x] background highlights
- [x] advertise support in DAP capabilities
Closes#31372
Release Notes:
- Debugger Beta: added basic support for highlighting in the console
based on ANSI escape codes.
This changes the way context servers are organised. We now store a
`source` which indicates if the MCP server is configured manually or
managed by an extension.
Release Notes:
- N/A
---------
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
Follow-up to: https://github.com/zed-industries/zed/pull/32769
Now that the project type identification telemetry can look for multiple
files in order to identify the project type, we need to make sure we
still only send a single event for a given worktree.
Also, simplifies project detection telemetry code
Release Notes:
- N/A
This PR fixes a common issue where a debug session won't start up and
user's weren't able to get any logs from the debug session. We now do
these three things
1. We know store a history of debug sessions
2. We added a new option to only look at the initialization sequence
3. We default to selecting a session in dap log view in stead of none
Release Notes:
- debugger: Add history to debug session logging
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Do not cleanup the result_id data on buffer drop, as this data is meant
to be stored between buffer reopens.
Use `LanguageServerId` as keys as this way it's simpler to access the
data.
Follow-up of https://github.com/zed-industries/zed/pull/32403
Release Notes:
- N/A
