Follow-up for #36093 and
https://github.com/zed-industries/zed/pull/36138
Since v1.355.0, `@github/copilot-language-server` has stopped responding
to `CheckStatus` requests if a `DidChangeConfiguration` notification
hasn’t been sent beforehand. This causes `CheckStatus` to remain in an
await state until it times out, leaving the connection stuck for a long
period before finally throwing a timeout error.
```rs
let status = server
.request::<request::CheckStatus>(request::CheckStatusParams {
local_checks_only: false,
})
.await
.into_response() // bails here with ConnectionResult::Timeout
.context("copilot: check status")?;
````
This PR fixes the issue by sending the `DidChangeConfiguration`
notification before making the `CheckStatus` request. It’s just an
ordering change i.e. no other LSP actions occur between these two calls.
Previously, we only updated our internal connection status and UI in
between.
Release Notes:
- Fixed an issue where GitHub Copilot could get stuck and fail to sign
in.
In vim and zed (vim and helix modes) typing "tx" will jump before the
next `x`, but typing it again won't do anything. But in helix the cursor
just jumps before the `x` after that. I added that in helix mode.
This also solves another small issue where the selection doesn't include
the first `x` after typing "fx" twice. And similarly after typing "Fx"
or "Tx" the selection should include the character that the motion
startet on.
Release Notes:
- helix: Fixed inconsistencies in the "f" and "t" motions
Related https://github.com/zed-industries/zed/issues/4642
Release Notes:
- Helix: without active selection, pressing `y` in helix mode will yank
a single character under cursor.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes #ISSUE
Release Notes:
- Keymap Editor: Added a button in the top left to allow opening the
keymap JSON file. Right clicking the button provides shortcuts to
opening the default Zed and Vim keymaps as well.
Closes https://github.com/zed-industries/zed/issues/36149
Release Notes:
- Fixed a bug where changing the `toolbar.breadcrumbs` setting didn't
immediately update the UI when saving the `settings.json` file.
cc https://github.com/zed-industries/zed/issues/34666
Display printing anyhow errors only renders the error itself, but not
any of its causes so we've been dropping the important context when
showing the issue to the users.
Release Notes:
- N/A
Follow up of this pr: #25148
Release Notes:
- Improved file sorting.
As described in #20126, I was fed up with lexicographical file sorting
in the project panel. The current sorting behavior doesn't handle
numeric segments properly, leading to unintuitive ordering like
`file_1.rs`, `file_10.rs`, `file_2.rs`.
## Example Sorting Results
Using `lexicographical` (default):
```
.
├── file_01.rs
├── file_1.rs
├── file_10.rs
├── file_1025.rs
├── file_2.rs
```
Using alphabetical (natural) sorting:
```
.
├── file_1.rs
├── file_01.rs
├── file_2.rs
├── file_10.rs
├── file_1025.rs
```
Currently, the terminal search function doesn't work well with ViMode.
It matches the search terms, scrolls the active match in the view, but
it doesn't move the cursor to the match, which makes it useless for
navigating the scrollback in vimode.
With this improvement, if a user activates ViMode before the search Zed
moves the cursor to the active search terms. So, when the search dialog
is dismissed the cursor is places on the latest active search term and
it's possible to navigate the scrollback via ViMode using this place as
the starting point.
https://github.com/user-attachments/assets/63325405-ed93-4bf8-a00f-28ded5511f31
Release Notes:
- Improved the search function in the terminal when ViMode is activated
Closes#35805
If the cursor is between column 0 and the indent size, pressing
`cmd-left` jumps to the indent. Pressing it again moves to the true
column 0. Further presses toggle between indent and column 0.
This PR changes the first `cmd-left` to go to column 0 instead of
indent. Toggling between is unaffected.
Release Notes:
- Fixed issue where pressing `cmd-left` with the cursor in the leading
spaces moved to the start of the text first. It now goes to the
beginning of the line first, then the start of the text.
The Zed Plex fonts were found to violate the OFL by using the word Plex
in the name.
Lilex has better ligatures and box-drawing characters than Zed Plex
Mono, but Zed Plex Sans should be identical
to IBM Plex Sans.
Closes#15542Closeszed-industries/zed-fonts#31
Release Notes:
- The "Zed Plex Sans" and "Zed Plex Mono" fonts have been replaced with
"IBM Plex Sans" and "Lilex". The old names still work for backward
compatibility. Other than fixing line-drawing characters, and improving
the ligatures, there should be little visual change as the fonts are all
of the same family.
- Introduced ".ZedSans" and ".ZedMono" as aliases to allow us to easily
change the default fonts in the future. These currently default to "IBM
Plex Sans" and "Lilex" respectively.
Closes#36093
Pin copilot version to 1.354 for now until further investigation.
Release Notes:
- Fixes issue where Copilot failed to sign in.
Co-authored-by: MrSubidubi <dev@bahn.sh>
1. Welcome Page Open
2. Welcome Nav clicked
3. Skip clicked
4. Font changed
5. Import settings clicked
6. Inlay Hints
7. Git Blame
8. Format on Save
9. Font Ligature
10. Ai Enabled
11. Ai Provider Modal open
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
This PR improves the toggle button group to be more responsive across
different layouts. This is accomplished by ensuring each button takes up
the same amount of space in the parent containers layout.
Ideally, this should be done with grids instead of a flexbox container,
as this would be much better suited for this purpose. Yet, since we lack
support for this, we go with this route for now.
| Before | After |
| --- | --- |
| <img width="1608" height="1094" alt="Bildschirmfoto 2025-08-13 um 11
24 26"
src="https://github.com/user-attachments/assets/2a4b5a59-6483-4f79-8fcb-e26e22071795"
/> | <img width="1608" height="1094" alt="Bildschirmfoto 2025-08-13 um
11 29 36"
src="https://github.com/user-attachments/assets/e6402729-6a8f-4a44-b79e-a569406edfff"
/> |
Release Notes:
- N/A
Release Notes:
- Added `reasoning_effort` support to custom models
Tested using the following config:
```json5
"language_models": {
"openai": {
"available_models": [
{
"name": "gpt-5-mini",
"display_name": "GPT 5 Mini (custom reasoning)",
"max_output_tokens": 128000,
"max_tokens": 272000,
"reasoning_effort": "high" // Can be minimal, low, medium (default), and high
}
],
"version": "1"
}
}
```
Docs:
https://platform.openai.com/docs/api-reference/chat/create#chat_create-reasoning_effort
This work could be used to split the GPT 5/5-mini/5-nano into each of
it's reasoning effort variant. E.g. `gpt-5`, `gpt-5 low`, `gpt-5
minimal`, `gpt-5 high`, and same for mini/nano.
Release Notes:
* Added a setting to control `reasoning_effort` in OpenAI models
I've recently disabled Spotlight on my Mac and found that this code path
(which I rely on a lot) ceased working for me.
Closes #ISSUE
Release Notes:
- N/A
The fix was changing the picker kind we used from `list` variant to a
`uniform` list
`Picker::list()` still has a bug where it's unable to scroll to it's
selected entry when the list is first openned. This is likely caused by
list not knowing the pixel offset of each element it would have to
scroll pass to get to the selected element
Release Notes:
- N/A
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
An alternative might be to adjust the logic to not nest items when their
ranges are the same, but then clicking them doesn't work properly /
moving the cursor does not change which is selected. This could probably
be made to work with some extra logic there, but it seems overkill.
The downside of fixing it at the query level is that other parts of the
declaration are not inside the item range. This seems to be fine for
single line declarations - the nearest outline item is highlighted.
However, if a part of the declaration is not included in an item range
and is on its own line, then no outline item is highlighted.
Release Notes:
- Outline Panel: Fixed nesting of var and field declarations with
multiple identifiers in Go and C++
C++ before:
<img width="743" height="227" alt="image"
src="https://github.com/user-attachments/assets/af1a1d76-ecdc-4999-ae9c-95591726ccca"
/>
C++ after:
<img width="795" height="250" alt="image"
src="https://github.com/user-attachments/assets/49667ed3-e088-48b3-a9f0-6a119b5e7648"
/>
Go before:
<img width="859" height="306" alt="image"
src="https://github.com/user-attachments/assets/ecc7530a-ca16-4f37-b8d1-60687f178b12"
/>
Go after:
<img width="900" height="334" alt="image"
src="https://github.com/user-attachments/assets/d741cfb0-59e5-4d27-bd6a-f422204dc972"
/>
1. Extension loaded events are now condensed into a single event with a
Vec of (extension_id, extension_version) called id_and_versions.
2. Editor Saved & AutoSaved are merged into a singular event with a type
field that is either "manual" or "autosave”.
3. Editor Edited event will only fire once every 10 minutes now.
4. Editor Closed event is fired when an editor item (tab) is removed
from a pane
cc: @katie-z-geer
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
