This Pull Request attempts to fix an issue where using `d}` in vim mode
would not delete all characters in case there's no blank lines at the
end of the buffer.
When calculating the end point for this motion, if there's no blank
lines at the end of the buffer, Zed was calculating it to be the last
character in the last line. However, if there's a newline at the end of
the buffer, it calculates the end point to be the point at the right of
the last character.
Here's an example, for the following buffer contents:
```
Hello!
Hello!
```
If the `d}` command is run at `(0, 0)`, the end point will be set to
`(1, 5)`. However, fi the same command is run for this buffer instead:
```
Hello!
Hello!
```
The end point will be set to `(1, 6)`, there's a 1 unit difference in
the column, which leads to all characters actually being deleted.
Closes#29393
Release Notes:
- Fixed deleting to the end of paragraph when there's no blank lines
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Taken from:
https://github.com/jeetsukumaran/vim-indentwise?tab=readme-ov-file#movements-by-relative-indent-depth
> [- : Move to previous line of lesser indent than the current line.
> [+ : Move to previous line of greater indent than the current line.
> [= : Move to previous line of same indent as the current line that is
separated from the current line by lines of different indents.
> ]- : Move to next line of lesser indent than the current line.
> ]+ : Move to next line of greater indent than the current line.
> ]= : Move to next line of same indent as the current line that is
separated from the current line by lines of different indents.
Release Notes:
- vim: Added indent-wise motions `] -/+/=`
Closes https://github.com/zed-industries/zed/issues/27619
Fixes issue with right wrapped movement when a multi-byte character is
at the end of the line. This is done by grabbing the last character on
the current row and using that characters size to calculate the
`max_column` variable, which is used to decide if the next right
movement should move down the line or not.
We did notice a bit of code that could be an issue that we wanted to
call out.
[Here](https://github.com/zed-industries/zed/blob/main/crates/editor/src/display_map.rs#L1070)
inside of `clip_at_line_end` it also does a saturating_sub(1), assuming
a single byte character. We didn't run into any issues due to this line
but felt like a similar bug. We can apply a similar fix if wanted to
pose the question first.
Test case: Moving to next line when eol is a multi-byte character
https://github.com/user-attachments/assets/1021ab1f-f49d-4986-8f9a-8cfc7e5c91bc
Release Notes:
- Fixed issue in vim forward spacing when a multi-byte character is at
the eol
---------
Co-authored-by: KyleBarton <kjbarton4@gmail.com>
Before this change we didn't explicitly handle vim's exclusive-linewise
edgecase
(https://neovim.io/doc/user/motion.html#exclusive).
Instead we had hard-coded workarounds in a few places to make our tests
pass.
The most pernicious of these workarounds was that we represented a
visual line
selection as including the trailing newline (or leading newline for
files that
end with no newline), which other code had to undo to get back to what
the user
indended.
Closes#21440
Updates #6900
Release Notes:
- vim: Fixed `d]}` to not delete the closing brace
- vim: Fixed `d}` from the start of the line to not delete the paragraph
separator
- vim: Fixed `d}` from the middle of the line to not delete the final
newline
Closes#26806
Changes: Clips the new point with `Bias::Right` like in
`saturating_right`
Release Notes:
- vim: Fixed `space` not handling non-ascii characters
Closes https://github.com/zed-industries/zed/issues/13111
Release Notes:
- vim: Added global marks `'[A-Z]`
- vim: Added persistence for global (and local) marks. When re-opening
the same workspace your previous marks will be available.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes https://github.com/zed-industries/zed/discussions/25665
> Currently Zed is missing quite an useful Vim motion: <count>% (go to
{count} percentage in the file).
Description:
{count}% - Go to {count} percentage in the file, on the first non-blank
in the line linewise. To compute the new line number this formula is
used: ({count} * number-of-lines + 99) / 100 .
> [Link](https://neovim.io/doc/user/motion.html#N%25).
Release Notes:
- vim: Added `<count>%` motion
---------
Co-authored-by: Conrad Irwin <conrad@zed.dev>
https://github.com/zed-industries/zed/pull/25663#issuecomment-2686095807
Renamed the `vim::Backspace` and `vim::Space` actions to
`vim::WrappingLeft` and `vim::WrappingRight` respectively. The old names
are still available, but they are marked as deprecated and users are
advised to use the new names.
Also added a paragraph to the docs describing how to enable wrapping
cursor navigation.
Covers part of #5129 by adding `MoveToStartOfExcerpt`,
`MoveToEndOfExcerpt`, `SelectToStartOfExcerpt`, and
`SelectToEndOfExcerpt`.
No default linux bindings yet as it's unclear what to use. Currently,
`ctrl-up` / `ctrl-down` scroll up and down by one line (see #13269).
Considering changing the meaning of those.
Mac:
* Previously `cmd-up` and `cmd-down` were `editor::MoveToBeginning` and
`editor::MoveToEnd`. In singleton editors these will behave the same as
before. In multibuffers, they will now step through excerpts instead of
jumping to the beginning / end of the multibuffer.
* `cmd-home` and `cmd-end`, often typed as `cmd-fn-left` and
`cmd-fn-right` are now `editor::MoveToBeginning` and
`editor::MoveToEnd`. This is useful in multibuffers.
Release Notes:
- Mac: `cmd-up` now moves to the previous
multibuffer excerpt start, and `cmd-down` moves to the next multibuffer
excerpt end. Within normal buffers these behave the same as before, moving
to the beginning or end.
- [x] snake case keymap properties
- [x] flatten actions
- [x] keymap migration + notfication
- [x] settings migration + notification
- [x] inline completions -> edit predictions
### future:
- keymap notification doesn't show up on start up, only on keymap save.
this is existing bug in zed, will be addressed in seperate PR.
Release Notes:
- Added a notification for deprecated settings and keymaps, allowing you
to migrate them with a single click. A backup of your existing keymap
and settings will be created in your home directory.
- Modified some keymap actions and settings for consistency.
---------
Co-authored-by: Piotr Osiewicz <piotr@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Closes#23877
Co-Authored-By: Ben <ben@zed.dev>
Co-Authored-By: Michael <michael@zed.dev>
Release Notes:
- vim: Fix navigating to end of line with inlay hints
---------
Co-authored-by: Ben <ben@zed.dev>
Co-authored-by: Michael <michael@zed.dev>
There's still a bit more work to do on this, but this PR is compiling
(with warnings) after eliminating the key types. When the tasks below
are complete, this will be the new narrative for GPUI:
- `Entity<T>` - This replaces `View<T>`/`Model<T>`. It represents a unit
of state, and if `T` implements `Render`, then `Entity<T>` implements
`Element`.
- `&mut App` This replaces `AppContext` and represents the app.
- `&mut Context<T>` This replaces `ModelContext` and derefs to `App`. It
is provided by the framework when updating an entity.
- `&mut Window` Broken out of `&mut WindowContext` which no longer
exists. Every method that once took `&mut WindowContext` now takes `&mut
Window, &mut App` and every method that took `&mut ViewContext<T>` now
takes `&mut Window, &mut Context<T>`
Not pictured here are the two other failed attempts. It's been quite a
month!
Tasks:
- [x] Remove `View`, `ViewContext`, `WindowContext` and thread through
`Window`
- [x] [@cole-miller @mikayla-maki] Redraw window when entities change
- [x] [@cole-miller @mikayla-maki] Get examples and Zed running
- [x] [@cole-miller @mikayla-maki] Fix Zed rendering
- [x] [@mikayla-maki] Fix todo! macros and comments
- [x] Fix a bug where the editor would not be redrawn because of view
caching
- [x] remove publicness window.notify() and replace with
`AppContext::notify`
- [x] remove `observe_new_window_models`, replace with
`observe_new_models` with an optional window
- [x] Fix a bug where the project panel would not be redrawn because of
the wrong refresh() call being used
- [x] Fix the tests
- [x] Fix warnings by eliminating `Window` params or using `_`
- [x] Fix conflicts
- [x] Simplify generic code where possible
- [x] Rename types
- [ ] Update docs
### issues post merge
- [x] Issues switching between normal and insert mode
- [x] Assistant re-rendering failure
- [x] Vim test failures
- [x] Mac build issue
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Joseph <joseph@zed.dev>
Co-authored-by: max <max@zed.dev>
Co-authored-by: Michael Sloan <michael@zed.dev>
Co-authored-by: Mikayla Maki <mikaylamaki@Mikaylas-MacBook-Pro.local>
Co-authored-by: Mikayla <mikayla.c.maki@gmail.com>
Co-authored-by: joão <joao@zed.dev>
Closes#12553
* [x] Fix `diff_hunk_before`
* [x] Fix failure to show deleted text when expanding hunk w/ cursor on
second line of the hunk
* [x] Failure to expand diff hunk below the cursor.
* [x] Delete the whole file, and expand the diff. Backspace over the
deleted hunk, panic!
* [x] Go-to-line now counts the diff hunks, but it should not
* [x] backspace at the beginning of a deleted hunk deletes too much text
* [x] Indent guides are rendered incorrectly
* [ ] Fix randomized multi buffer tests
Maybe:
* [ ] Buffer search should include deleted text (in vim mode it turns
out I use `/x` all the time to jump to the next x I can see).
* [ ] vim: should refuse to switch into insert mode if selection is
fully within a diff.
* [ ] vim `o` command when cursor is on last line of deleted hunk.
* [ ] vim `shift-o` on first line of deleted hunk moves cursor but
doesn't insert line
* [x] `enter` at end of diff hunk inserts a new line but doesn't move
cursor
* [x] (`shift-enter` at start of diff hunk does nothing)
* [ ] Inserting a line just before an expanded hunk collapses it
Release Notes:
- Improved diff rendering, allowing you to navigate with your cursor
inside of deleted text in diff hunks.
---------
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Cole <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Michael <michael@zed.dev>
Co-authored-by: Agus <agus@zed.dev>
Co-authored-by: João <joao@zed.dev>
Also:
* Adds `impl_internal_actions!` for deriving the `Action` trait without
registering.
* Removes some deserializers that immediately fail in favor of
`#[serde(skip)]` on fields where they were used. This also omits them
from the schema.
Release Notes:
- Keymap settings file now has more JSON schema information to inform
`json-language-server` completions and info, particularly for actions
that take input.
This fixes the issue described in this comment:
https://github.com/zed-industries/zed/pull/22439#issuecomment-2563896422
Essentially, we'd clip in the wrong direction when there were multi-line
inlay hints.
It also fixes inline completions for non-Zeta-providers showing up in
normal mode.
Release Notes:
- N/A
Fixes#22151.
Turns out Vim also has some weird behavior with sentence deletion in
case it's on the first character of a line.
Release Notes:
- vim: Fixed deleting sentence-wise (i.e. `d(` and `d)`), which would
previously delete the whole line instead of just a sentence.
Closes#19054
Rename `max_buffer_row()` to `widest_line_number()` to (hopefully)
prevent
people assuming it means the same as `max_point().row`.
Release Notes:
- Fixed a panic when folding in a multibuffer
Closes#4642
- Added the ability to switch to helix normal mode, with an additional
helix visual mode.
- <kbd>ctrl</kbd><kbd>h</kbd> from Insert mode goes to Helix Normal
mode. <kbd> i </kbd> and <kbd> a </kbd> to go back.
- Need to find a way to perform the helix normal mode selection with
<kbd> w </kbd>, <kbd>e </kbd>, <kbd> b </kbd> as a first step. Need to
figure out how the mode will interoperate with the VIM mode as the new
additions are in the same crate.
Co-Authored-By: Max <max@zed.dev>
Release Notes:
- vim: Added motions `[[`, `[]`, `]]`, `][` for navigating by section,
`[m`, `]m`, `[M`, `]M` for navigating by method, and `[*`, `]*`, `[/`,
`]/` for comments. These currently only work for languages built in to
Zed, as they are powered by new tree-sitter queries.
- vim: Added new text objects: `ic`, `ac` for inside/around classes,
`if`,`af` for functions/methods, and `g c` for comments. These currently
only work for languages built in to Zed, as they are powered by new
tree-sitter queries.
---------
Co-authored-by: Max <max@zed.dev>
Closes#8628
Release Notes:
- Added support for resizing the current pane using vim keybinds with
the intention to follow the functionality of vim
- "ctrl-w +" to make a pane taller
- "ctrl-w -" to make the pane shorter
- "ctrl-w >" to make a pane wider
- "ctrl-w <" to make the pane narrower
- Changed vim pre_count and post_count to globals to allow for other
crates to use the vim count. In this case, it allows for resizing by
more than one unit. For example, "10 ctrl-w -" will decrease the height
of the pane 10 times more than "ctrl-w -"
- This pr does **not** add keybinds for making all panes in an axis
equal size and does **not** add support for resizing docks. This is
mentioned because these could be implied by the original issue
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-Authored-By: Mikayla <mikayla@zed.dev>
Co-Authored-By: Nate <nate@zed.dev>
Closes#15606Closes#13515
Release Notes:
- Fixes `-` being considered a word character for selections in some
languages
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Nate <nate@zed.dev>
Closes#13579
A major painpoint in the Vim crate has been life-cycle management. We
used to have one global Vim instance that tried to track per-editor
state; this led to a number of subtle issues (e.g. #13579, the mode
indicator being global, and quick toggling between windows letting vim
mode's notion of the active editor get out of sync).
This PR changes the internal structure of the code so that there is now
one `Vim` instance per `Editor` (stored as an `Addon`); and the global
stuff is separated out. This fixes the above problems, and tidies up a
bunch of the mess in the codebase.
Release Notes:
* vim: Fixed accidental visual mode in project search and go to
references
([#13579](https://github.com/zed-industries/zed/issues/13579)).
Release Notes:
- vim: Added `-`/`+` to go to beginning of line above/below
([#14183](https://github.com/zed-industries/zed/issues/14183)).
- vim: (Breaking) Removed non-standard builtin binding from `-` to open
the project panel. You can re-add it to your keymap file with:
`{"context":"VimControl", "bindings":{ "-":
"pane::RevealInProjectPanel"}}`
Optionally, include screenshots / media showcasing your addition that
can be included in the release notes.
https://github.com/zed-industries/zed/assets/32429059/0e9e9348-265e-4a81-a45a-4739034dc5d9
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-Authored-By: Richard <richard@zed.dev>
Release Notes:
- vim: Fixed behavior of `dw` at the end of a soft wrapped line
Co-authored-by: Richard <richard@zed.dev>
This cleans up the neovim-backed vim tests:
- removed exempted tests (we'll rely on bug reports to find missing edge
cases)
- moved all assertions into non-async fn's so that failures are
reporting on the right file/line
- removed the NeovimBackedBindingTestContext
- renamed a few things to make them clearer
- reduced the number of permutations tested in some cases to reduce
slowest test from 60s to 5s
Release Notes:
- N/A
Part of https://github.com/zed-industries/zed/issues/8081
To avoid confusion and bugs when converting between various row `u32`'s,
use different types for each.
Further PRs should split `Point` into buffer and multi buffer variants
and make the code more readable.
Release Notes:
- N/A
---------
Co-authored-by: Piotr <piotr@zed.dev>
Release Notes:
- vim: Added support for buffer-local marks (`'a-'z`) and some builtin
marks `'<`,`'>`,`'[`,`']`, `'{`, `'}` and `^`. Global marks (`'A-'Z`),
and other builtin marks (`'0-'9`, `'(`, `')`, `''`, `'.`, `'"`) are not
yet implemented. (#5122)
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
For #11084 In the case of an indentation in front of the current line,
it may also be necessary to deal with the start point of the selected
range
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
