Closes https://github.com/zed-industries/zed/issues/31181
Release Notes:
- Added the `multi_cursor_modifier` setting to be respected when making
columnar selections using the mouse drag.
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Follow-up of https://github.com/zed-industries/zed/pull/19230
* starts to send `result_id` in pull requests to allow servers to reply
with non-full results
* fixes a bug where disk-based diagnostics were offset after pulling the
diagnostics
* fixes a bug due to which pull diagnostics could not be disabled
* uses better names and comments for the workspace pull diagnostics part
Release Notes:
- N/A
This allows storing the profile per thread, as well as moving the logic
of which tools are enabled or not to the profile itself.
This makes it much easier to switch between profiles, means there is
less global state being changed on every profile change.
Release Notes:
- agent panel: allow saving the profile per thread
---------
Co-authored-by: Ben Kunkle <ben.kunkle@gmail.com>
Closes [#13107](https://github.com/zed-industries/zed/issues/13107)
Enabled pull diagnostics by default, for the language servers that
declare support in the corresponding capabilities.
```
"diagnostics": {
"lsp_pull_diagnostics_debounce_ms": null
}
```
settings can be used to disable the pulling.
Release Notes:
- Added support for the LSP `textDocument/diagnostic` command.
# Brief
This is draft PR that implements the LSP `textDocument/diagnostic`
command. The goal is to receive your feedback and establish further
steps towards fully implementing this command. I tried to re-use
existing method and structures to ensure:
1. The existing functionality works as before
2. There is no interference between the diagnostics sent by a server and
the diagnostics requested by a client.
The current implementation is done via a new LSP command
`GetDocumentDiagnostics` that is sent when a buffer is saved and when a
buffer is edited. There is a new method called `pull_diagnostic` that is
called for such events. It has debounce to ensure we don't spam a server
with commands every time the buffer is edited. Probably, we don't need
the debounce when the buffer is saved.
All in all, the goal is basically to get your feedback and ensure I am
on the right track. Thanks!
## References
1.
https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#textDocument_pullDiagnostics
## In action
You can clone any Ruby repo since the `ruby-lsp` supports the pull
diagnostics only.
Steps to reproduce:
1. Clone this repo https://github.com/vitallium/stimulus-lsp-error-zed
2. Install Ruby (via `asdf` or `mise).
4. Install Ruby gems via `bundle install`
5. Install Ruby LSP with `gem install ruby-lsp`
6. Check out this PR and build Zed
7. Open any file and start editing to see diagnostics in realtime.
https://github.com/user-attachments/assets/0ef6ec41-e4fa-4539-8f2c-6be0d8be4129
---------
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Re: #19015Close#12667
When dragging a dock’s resize handle, only the active panel grows or
shrinks. This patch introduces an opt-in behaviour that lets users
resize every panel hosted by that dock at once.
Release Notes:
- Added new `resize_all_panels_in_dock` setting to optionally resize
every panel in a dock together.
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Hi, this pull request adds `sorbet` and `steep` to the list of available
language servers for the Ruby language in order to prepare default Ruby
language settings for these LS. Both language servers are disabled by
default. We plan to add both in #104 and #102. Thanks!
Release Notes:
- ruby: Added `sorbet` and `steep` to the list of available language servers.
Closes: https://github.com/rzukic/zed-latex/issues/77
## Default formatter: `latexindent`
Before, formatting was delegated to the language server, which just ran
a `latexindent` executable. There was no benefit to running it through
the language server over running it as an "external" formatter in zed.
In fact this was an issue because there was no way to provide an
explicit path for the executable (causing above extension issue). Having
the default settings configure the formatter directly gives more control
to user and removes the number of indirections making it clearer how to
tweak things like the executable path, or extra CLI args, etc...
## Alternative: `prettier`
Default settings have also been added to allow prettier as the formatter
(by just setting `"formatter": "prettier"` in the "LaTeX" language
settings). This was not possible before because an extra line needed to
be added to the `prettier` crate (similarly to what was done for
https://github.com/zed-industries/zed/issues/19024) to find the plugin
correctly.
> [!NOTE]
> The `prettier-plugin-latex` node module also contained a
`dist/standalone.js` but using that instead of
`dist/prettier-plugin-latex.js` gave an error, and indeed the latter
worked as intended (along with its questionable choices for formatting).
Release Notes:
- LaTeX: added default `latexindent` formatter settings without relying
on `texlab`, as well as allowing `prettier` to be chosen for formatting
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
Closes#4265Closes#24600
This setting causes many visual defects, and introduces unnecessary
(maintenance) complexity. as seen by #4265 and #24600
CC: @iamnbutler - How do you feel about this? I recommend looking at
https://github.com/zed-industries/zed/pull/24150#issuecomment-2866706506
for more context
Release Notes:
- Removed support
---------
Co-authored-by: Peter <peter@zed.dev>
This pull request adds full integration with OpenRouter, allowing users
to access a wide variety of language models through a single API key.
**Implementation Details:**
* **Provider Registration:** Registers OpenRouter as a new language
model provider within the application's model registry. This includes UI
for API key authentication, token counting, streaming completions, and
tool-call handling.
* **Dedicated Crate:** Adds a new `open_router` crate to manage
interactions with the OpenRouter HTTP API, including model discovery and
streaming helpers.
* **UI & Configuration:** Extends workspace manifests, the settings
schema, icons, and default configurations to surface the OpenRouter
provider and its settings within the UI.
* **Readability:** Reformats JSON arrays within the settings files for
improved readability.
**Design Decisions & Discussion Points:**
* **Code Reuse:** I leveraged much of the existing logic from the
`openai` provider integration due to the significant similarities
between the OpenAI and OpenRouter API specifications.
* **Default Model:** I set the default model to `openrouter/auto`. This
model automatically routes user prompts to the most suitable underlying
model on OpenRouter, providing a convenient starting point.
* **Model Population Strategy:**
* <strike>I've implemented dynamic population of available models by
querying the OpenRouter API upon initialization.
* Currently, this involves three separate API calls: one for all models,
one for tool-use models, and one for models good at programming.
* The data from the tool-use API call sets a `tool_use` flag for
relevant models.
* The data from the programming models API call is used to sort the
list, prioritizing coding-focused models in the dropdown.</strike>
* <strike>**Feedback Welcome:** I acknowledge this multi-call approach
is API-intensive. I am open to feedback and alternative implementation
suggestions if the team believes this can be optimized.</strike>
* **Update: Now this has been simplified to one api call.**
* **UI/UX Considerations:**
* <strike>Authentication Method: Currently, I've implemented the
standard API key input in settings, similar to other providers like
OpenAI/Anthropic. However, OpenRouter also supports OAuth 2.0 with PKCE.
This could offer a potentially smoother, more integrated setup
experience for users (e.g., clicking a button to authorize instead of
copy-pasting a key). Should we prioritize implementing OAuth PKCE now,
or perhaps add it as an alternative option later?</strike>(PKCE is not
straight forward and complicated so skipping this for now. So that we
can add the support and work on this later.)
* <strike>To visually distinguish models better suited for programming,
I've considered adding a marker (e.g., `</>` or `🧠`) next to their
names. Thoughts on this proposal?</strike>. (This will require a changes
and discussion across model provider. This doesn't fall under the scope
of current PR).
* OpenRouter offers 300+ models. The current implementation loads all of
them. **Feedback Needed:** Should we refine this list or implement more
sophisticated filtering/categorization for better usability?
**Motivation:**
This integration directly addresses one of the most highly upvoted
feature requests/discussions within the Zed community. Adding OpenRouter
support significantly expands the range of AI models accessible to
users.
I welcome feedback from the Zed team on this implementation and the
design choices made. I am eager to refine this feature and make it
available to users.
ISSUES: https://github.com/zed-industries/zed/discussions/16576
Release Notes:
- Added support for OpenRouter as a language model provider.
---------
Signed-off-by: Umesh Yadav <umesh4257@gmail.com>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Closes#27982
Release Notes:
- Added `close_on_file_delete` setting (off by default) to allow closing
open files after they have been deleted on disk
---------
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
Follow up to https://github.com/zed-industries/zed/pull/31470.
I started looking at config and changed preferred_completion_mode to
burn to only find its max so made changes to align it better with
rebrand. As this is in preview build now.
This doesn't touch zed_llm_client. Only the Zed changes the code and doc
to match the new UI of burn mode. There are still more things to be
renamed, though.
Release Notes:
- N/A
---------
Signed-off-by: Umesh Yadav <git@umesh.dev>
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
* stopped fetching LSP tasks for too long (but still use the hardcoded
value for the time being — the LSP tasks settings part is a simple bool
key and it's not very simple to fit in another value there)
* introduced `prefer_lsp` language task settings value, to control
whether in the gutter/modal/both/none LSP tasks are shown exclusively,
if possible
Release Notes:
- Added a way to prefer LSP tasks over Zed tasks
This PR is a follow-up to
https://github.com/zed-industries/zed/pull/31415 that fixes the model ID
for Claude Sonnet 4.
With the release of the Claude 4 models, the model version now appears
at the end.
Release Notes:
- N/A
This PR adds the ability to hear a sound notification when the agent is
done generating and/or needs user input. This setting is turned off by
default and can be used together with the visual notification. The
specific sound I'm using here comes from the [Material Design 2 Sound
Library](https://m2.material.io/design/sound/sound-resources.html#).
Release Notes:
- agent: Added the ability to have a sound notification when the agent
is done generating and/or needs user input.
Fixes#14612
This was a feature I dearly missed from VSCode, so adding this helped me
migrate to Zed without disrupting my workflow. I found that `4.0` was a
nice goldilocks multiplier and felt close/the same as the speed in
VSCode.
Release Notes:
- Added faster scrolling in the editor while holding opt/alt
Follow up to https://github.com/zed-industries/zed/pull/30140 and
https://github.com/zed-industries/zed/pull/31236
This PR introduces an inline code action indicator that shows up at the
start of a buffer line when there's enough space. If space is tight, it
adjusts to lines above or below instead. It also adjusts when cursor is
near indicator.
The indicator won't appear if there's no space within about 8 rows in
either direction, and it also stays hidden for folded ranges. It also
won't show up in case there is not space in multi buffer excerpt. These
cases account for very little because practically all languages do have
indents.
https://github.com/user-attachments/assets/1363ee8a-3178-4665-89a7-c86c733f2885
This PR also sets the existing `toolbar.code_actions` setting to `false`
in favor of this.
Release Notes:
- Added code action indicator which shows up inline at the start of the
row. This can be disabled by setting `inline_code_actions` to `false`.
Don't hard wrap interactively; instead, soft wrap in `Bounded` mode
(editor width or 72 chars, whichever is smaller), and then hard wrap
before sending the commit message to git.
This also makes the soft wrap mode and width for commit messages
configurable in language settings.
Previously we didn't support soft wrap modes other than `EditorWidth` in
auto-height editors; I tried to add support for this by analogy with
code that was already there, and it seems to work pretty well.
Closes#27508
Release Notes:
- Fixed confusing wrapping behavior in commit message editors.
Closes https://github.com/blopker/codebook/issues/79
Recently, the setting `diagnostics_max_severity` was changed from `null`
to `warning`in this PR: https://github.com/zed-industries/zed/pull/30316
This change has caused the various spell checking extensions to not work
as expected by default, most of which use the `hint` diagnostic. This
goes against user expectations when installing one of these extensions.
Without `hint` as the default, extension authors will either need to
change the diagnostic levels, or instruct users to add
`diagnostics_max_severity` to their settings as an additional step,
neither of which is a great user experience.
This PR sets the default `hint`, which is closer to the original
behavior before the aforementioned PR.
Release Notes:
- Changed `diagnostics_max_severity` to `hint` instead of `warning` by
default
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Closes https://github.com/zed-industries/zed/issues/20016
Use `"read_ssh_config": false` to disable the new behavior.
Release Notes:
- Added a way to import ssh host names from the ssh config
---------
Co-authored-by: Cole Miller <m@cole-miller.net>
Designed to pair with #30444 to enable enterprises to make it harder to
sign into the collab server and perhaps accidentally end up sending code
to Zed.
Release Notes:
- N/A
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
- Add docs for `hover_popover_delay`.
- Set `hover_popover_delay` to `300` from `350` which matches [VSCode's
hover
delay](ed48873ba2/src/vs/editor/common/config/editorOptions.ts (L2219)).
Release Notes:
- Added `hover_popover_delay` to settings which determines time to wait
in milliseconds before showing the informational hover box.
* project search button in the status bar
```jsonc
"search": {
"button": false
},
```
* project diagnostics button in the status bar
```jsonc
"diagnostics": {
"button": false
}
```
* project name and host buttons in the title bar
```jsonc
"title_bar": {
"show_project_items": false
}
```
* git branch button in the title bar
```jsonc
"title_bar": {
"show_branch_name": false
}
```
Before:
<img width="1728" alt="before"
src="https://github.com/user-attachments/assets/4b13b431-3ac1-43b3-8ac7-469e5a9ccf7e"
/>
After:
<img width="1728" alt="after"
src="https://github.com/user-attachments/assets/baf2765a-e27b-47a3-8897-89152b7a7c95"
/>
Release Notes:
- Added more settings to hide buttons from Zed UI
Release Notes:
- Fixed a race condition that sometimes prevented a system-installed
`node` binary from being detected.
- Fixed a bug where the `node.path` setting was not respected when
invoking npm.
* Adds a `diagnostics_max_severity: null` editor settings that has
previous hardcoded default, `warning`
* Make inline diagnostics to inherit this setting by default (can be
overridden with its own max_severity setting)
* Allows to toggle diagnostics in the editor menu and via new action,
`editor::ToggleDiagnostics`
Closes https://github.com/zed-industries/zed/issues/4686
Release Notes:
- N/A *or* Added/Fixed/Improved ...
## Overview
This PR adds the minimap feature to the Zed editor, closely following
the [design from Visual Studio
Code](https://code.visualstudio.com/docs/getstarted/userinterface#_minimap).
When configured, a second instance of the editor will appear to the left
of the scrollbar. This instance is not interactive and it has a slimmed
down set of annotations, but it is otherwise just a zoomed-out version
of the main editor instance. A thumb shows the line boundaries of the
main viewport, as well as the progress through the document. Clicking on
a section of code in the minimap will jump the editor to that code.
Dragging the thumb will act like the scrollbar, moving sequentially
through the document.
## New settings
This adds a `minimap` section to the editor settings with the following
keys:
### `show`
When to show the minimap in the editor.
This setting can take three values:
1. Show the minimap if the editor's scrollbar is visible: `"auto"`
2. Always show the minimap: `"always"`
3. Never show the minimap: `"never"` (default)
### `thumb`
When to show the minimap thumb.
This setting can take two values:
1. Show the minimap thumb if the mouse is over the minimap: `"hover"`
2. Always show the minimap thumb: `"always"` (default)
### `width`
The width of the minimap in pixels.
Default: `100`
### `font_size`
The font size of the minimap in pixels.
Default: `2`
## Providing feedback
In order to keep the PR focused on development updates, please use the
discussion thread for feature suggestions and usability feedback: #26894
## Features left to add
- [x] fix scrolling performance
- [x] user settings for enable/disable, width, text size, etc.
- [x] show overview of visible lines in minimap
- [x] clicking on minimap should navigate to the corresponding section
of code
- ~[ ] more prominent highlighting in the minimap editor~
- ~[ ] override scrollbar auto setting to always when minimap is set to
always show~
Release Notes:
- Added minimap for high-level overview and quick navigation of editor
contents.
---------
Co-authored-by: MrSubidubi <dev@bahn.sh>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
This conflicts for space with breakpoints, and seems borderline in terms
of utility.
We could consider bringing it back in a way that is closer to the
cursor, or be content with our right-click menu discovery.
Release Notes:
- Remove the code actions indicator from the gutter. It is still
available from the right click menu, or with the keyboard shortcut.
Adds a new `agent.model_parameters` setting that allows the user to
specify a custom temperature for a provider AND/OR model:
```json5
"model_parameters": [
// To set parameters for all requests to OpenAI models:
{
"provider": "openai",
"temperature": 0.5
},
// To set parameters for all requests in general:
{
"temperature": 0
},
// To set parameters for a specific provider and model:
{
"provider": "zed.dev",
"model": "claude-3-7-sonnet-latest",
"temperature": 1.0
}
],
```
Release Notes:
- agent: Allow customizing temperature by provider/model
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Supersedes: https://github.com/zed-industries/zed/pull/29936
Thanks for your contribution @imumesh18, but we had a slightly different
take on it :)
Release Notes:
- N/A
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
- Languages now define their preferred debuggers in `config.toml`.
- `LanguageRegistry` now exposes language config even for languages that
are not yet loaded. This necessitated extension registry changes (we now
deserialize config.toml of all language entries when loading new
extension index), but it should be backwards compatible with the old
format. /cc @maxdeviant
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Co-authored-by: Anthony <anthony@zed.dev>
Closes #ISSUE
Release Notes:
- Agent Beta: Renamed the top-level `assistant` settings key to `agent`.
A migration for existing settings files is included.
- Agent Beta: Moved the `assistant::ToggleFocus`,
`assistant::ToggleModelSelector`, and `assistant::OpenRulesLibrary`
actions to the `agent` namespace. Existing keymaps that mention these
actions by their old names will continue to work.
---------
Co-authored-by: Max <max@zed.dev>
You can set `agent_font_size` as a top-level settings key. You can also
use `zed::IncreaseBufferFontSize` and `zed::DecreaseBufferFontSize` and
`zed::ResetBufferFontSize` the agent panel is focused via the standard
bindings to adjust the agent font size. In the future, it might make
sense to rename these actions to be more general since "buffer" is now a
bit of a misnomer. 🍐'd with @mikayla-maki
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Completely subjective, but I just like it better.
Release Notes:
- N/A
---------
Co-authored-by: Danilo Leal <67129314+danilo-leal@users.noreply.github.com>
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Kinda feel like the way that makes the most sense to sort profiles in
the dropdown is by relevance/impact. "Write" is the default profile and
contains all built-in tools turned on by default, thus it should be the
first. "Ask" contains read-only tools, one step down from Write. And
"Manual" is totally empty, the least "powerful" profile, thus the last.
Release Notes:
- N/A
Closes#29836
The agent diff toolbar item was causing the editor toolbar to show even
when all the other elements were disabled via settings.
This PR fixes this by setting the location to
`ToolbarItemLocation::Hidden` in the states where it shouldn't show.
It also adds a new a `toolbar.agent_review` setting to hide the agent
review buttons altogether. However, if the other toolbar elements are
hidden and the file isn't under review, the editor toolbar will still be
hidden. So you only need to set this to `false` if you don't want them
to show up even under agent review.
Release Notes:
- N/A
Also `now` in `write` profile
Release Notes:
- Tools for manipulating directories no longer require confirmation, and
are enabled in the Write profile
- Enabled `now` and `list_directory` tools by default in Write profile
---------
Co-authored-by: Cole Miller <m@cole-miller.net>
Co-authored-by: Cole Miller <cole@zed.dev>
