Swift bindings BEGONE
Release Notes:
- Switched from using the Swift LiveKit bindings, to the Rust bindings,
fixing https://github.com/zed-industries/zed/issues/9396, a crash when
leaving a collaboration session, and making Zed easier to build.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Michael Sloan <michael@zed.dev>
This is a clean-up PR in anticipation of introduction of Debugger
Registry. I wanna get rid of DebugAdapterKind (or rather, it being an
enum).
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
This is another in the series of PRs to make the GitStore own all
repository state and enable better concurrency control for git
repository scans.
After this PR, the `RepositoryEntry`s stored in worktree snapshots are
used only as a staging ground for local GitStores to pull from after
git-related events; non-local worktrees don't store them at all,
although this is not reflected in the types. GitTraversal and other
places that need information about repositories get it from the
GitStore. The GitStore also takes over handling of the new
UpdateRepository and RemoveRepository messages. However, repositories
are still discovered and scanned on a per-worktree basis, and we're
still identifying them by the (worktree-specific) project entry ID of
their working directory.
- [x] Remove WorkDirectory from RepositoryEntry
- [x] Remove worktree IDs from repository-related RPC messages
- [x] Handle UpdateRepository and RemoveRepository RPCs from the
GitStore
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This ensures that we do not get a bunch of error logs when using the
symbol search:
```
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:33+01:00 ERROR project] Method not found
...
```
Release Notes:
- N/A
This is a pure refactoring PR that goes through all the git-related APIs
exposed by the worktree crate and minimizes their use outside that
crate, migrating callers of those APIs to read from the GitStore
instead. This is to prepare for evacuating git repository state from
worktrees and making the GitStore the new source of truth.
Other drive-by changes:
- `project::git` is now `project::git_store`, for consistency with the
other project stores
- the project panel's test module has been split into its own file
Release Notes:
- N/A
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR updates our DB schemas and wire protocol to separate the
synchronization of git statuses and other repository state from the
synchronization of worktrees. This paves the way for moving the code
that executes git status updates out of the `worktree` crate and onto
the new `GitStore`. That end goal is motivated by two (related) points:
- Disentangling git status updates from the worktree's
`BackgroundScanner` will allow us to implement a simpler concurrency
story for those updates, hopefully fixing some known but elusive bugs
(upstream state not updating after push; statuses getting out of sync in
remote projects).
- By moving git repository state to the project-scoped `GitStore`, we
can get rid of the duplication that currently happens when two worktrees
are associated with the same git repository.
Co-authored-by: Max <max@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR reworks the `FakeGitRepository` type that we use for testing git
interactions, to make it more realistic. In particular, the `status`
method now derives the Git status from the differences between HEAD, the
index, and the working copy. This way, if you modify a file in the
`FakeFs`, the Git repository's `status` method will reflect that
modification.
Release Notes:
- N/A
---------
Co-authored-by: Junkui Zhang <364772080@qq.com>
This is the core change:
https://github.com/zed-industries/zed/pull/26758/files#diff-044302c0d57147af17e68a0009fee3e8dcdfb4f32c27a915e70cfa80e987f765R1052
TODO:
- [x] Use AsyncFn instead of Fn() -> Future in GPUI spawn methods
- [x] Implement it in the whole app
- [x] Implement it in the debugger
- [x] Glance at the RPC crate, and see if those box future methods can
be switched over. Answer: It can't directly, as you can't make an
AsyncFn* into a trait object. There's ways around that, but they're all
more complex than just keeping the code as is.
- [ ] Fix platform specific code
Release Notes:
- N/A
This PR adds a failing test `test_staging_hunks_with_delayed_fs_event`
and makes it pass
Also skips a queued read for git diff states if another read was
requested (less work)
This still doesn't catch all race conditions, but the PR is getting long
so I'll yield this and start another branch
Release Notes:
- N/A
It looks like:
- https://github.com/zed-industries/zed/pull/26780
accidentally added a new event type, `AssistantThreadFeedback`, using
the old event system, that it didn't end up actually using, as the code
actually relies on using the newer (preferred) `telemetry::event!()`.
Release Notes:
- N/A
### DISCLAIMER
> As of 6th March 2025, debugger is still in development. We plan to
merge it behind a staff-only feature flag for staff use only, followed
by non-public release and then finally a public one (akin to how Git
panel release was handled). This is done to ensure the best experience
when it gets released.
### END OF DISCLAIMER
**The current state of the debugger implementation:**
https://github.com/user-attachments/assets/c4deff07-80dd-4dc6-ad2e-0c252a478fe9https://github.com/user-attachments/assets/e1ed2345-b750-4bb6-9c97-50961b76904f
----
All the todo's are in the following channel, so it's easier to work on
this together:
https://zed.dev/channel/zed-debugger-11370
If you are on Linux, you can use the following command to join the
channel:
```cli
zed https://zed.dev/channel/zed-debugger-11370
```
## Current Features
- Collab
- Breakpoints
- Sync when you (re)join a project
- Sync when you add/remove a breakpoint
- Sync active debug line
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Restart stack frame (if adapter supports this)
- Variables
- Loaded sources
- Modules
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Debug console
- Breakpoints
- Log breakpoints
- line breakpoints
- Persistent between zed sessions (configurable)
- Multi buffer support
- Toggle disable/enable all breakpoints
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Show collapsed stack frames
- Restart stack frame (if adapter supports this)
- Loaded sources
- View all used loaded sources if supported by adapter.
- Modules
- View all used modules (if adapter supports this)
- Variables
- Copy value
- Copy name
- Copy memory reference
- Set value (if adapter supports this)
- keyboard navigation
- Debug Console
- See logs
- View output that was sent from debug adapter
- Output grouping
- Evaluate code
- Updates the variable list
- Auto completion
- If not supported by adapter, we will show auto-completion for existing
variables
- Debug Terminal
- Run custom commands and change env values right inside your Zed
terminal
- Attach to process (if adapter supports this)
- Process picker
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Disconnect
- Restart
- Stop
- Warning when a debug session exited without hitting any breakpoint
- Debug view to see Adapter/RPC log messages
- Testing
- Fake debug adapter
- Fake requests & events
---
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
Co-authored-by: Piotr <piotr@zed.dev>
This PR makes the account age-related fields required in
`LlmTokenClaims`.
We've also removed the account age check from the LLM token issuance
endpoint, instead having it solely be enforced in the `POST /completion`
endpoint.
This change will be safe to deploy at ~8:01PM EDT.
Release Notes:
- N/A
This PR defers the account age check to the `POST /completion` endpoint
instead of doing it when an LLM token is generated.
This will allow us to lift the account age restriction for using Edit
Prediction.
Note: We're still temporarily performing the account age check when
issuing the LLM token until this change is deployed and the LLM tokens
have had a chance to cycle.
Release Notes:
- N/A
This PR cleans up the LLM token creation a bit.
We now pass in the entire list of feature flags to the
`LlmTokenClaims::create` method to prevent having a bunch of confusable
`bool` parameters.
Release Notes:
- N/A
This PR refactors the constructors for the various Git hosting providers
to facilitate adding support for more self-hosted variants.
Release Notes:
- N/A
Similar to how tasks are fetched via LSP, also queries for document's
code lens and filters the ones with the commands, supported in server
capabilities.
Whatever's left and applicable to the range given, is added to the
actions menu:
This way, Zed can get more actions to run, albeit neither r-a nor vtsls
seem to provide anything by default.
Currently, there are no plans to render code lens the way as in VSCode,
it's just the extra actions that are show in the menu.
------------------
As part of the attempts to use rust-analyzer LSP data about the
runnables, I've explored a way to get this data via standard LSP.
When particular experimental client capabilities are enabled (similar to
how clangd does this now), r-a starts to send back code lens with the
data needed to run a cargo command:
```
{"jsonrpc":"2.0","id":48,"result":{"range":{"start":{"line":0,"character":0},"end":{"line":98,"character":0}},"command":{"title":"▶︎ Run Tests","command":"rust-analyzer.runSingle","arguments":[{"label":"test-mod tests::ecparser","location":{"targetUri":"file:///Users/someonetoignore/work/ec4rs/src/tests/ecparser.rs","targetRange":{"start":{"line":0,"character":0},"end":{"line":98,"character":0}},"targetSelectionRange":{"start":{"line":0,"character":0},"end":{"line":98,"character":0}}},"kind":"cargo","args":{"environment":{"RUSTC_TOOLCHAIN":"/Users/someonetoignore/.rustup/toolchains/1.85-aarch64-apple-darwin"},"cwd":"/Users/someonetoignore/work/ec4rs","overrideCargo":null,"workspaceRoot":"/Users/someonetoignore/work/ec4rs","cargoArgs":["test","--package","ec4rs","--lib"],"executableArgs":["tests::ecparser","--show-output"]}}]}}}
```
This data is passed as is to VSCode task processor, registered in
60cd01864a/editors/code/src/main.ts (L195)
where it gets eventually executed as a VSCode's task, all handled by the
r-a's extension code.
rust-analyzer does not declare server capabilities for such tasks, and
has no `workspace/executeCommand` handle, and Zed needs an interactive
terminal output during the test runs, so we cannot ask rust-analyzer
more than these descriptions.
Given that Zed needs experimental capabilities set to get these lens:
60cd01864a/editors/code/src/client.ts (L318-L327)
and that the lens may contain other odd tasks (e.g. docs opening or
references lookup), a protocol extension to get runnables looks more
preferred than lens:
https://rust-analyzer.github.io/book/contributing/lsp-extensions.html#runnables
This PR does not include any work on this direction, limiting to the
general code lens support.
As a proof of concept, it's possible to get the lens and even attempt to
run it, to no avail:
Release Notes:
- Used `textDocument/codeLens` data in the actions menu when applicable
Release Notes:
- Multibuffers now use less vertical space for excerpt boundaries.
Additionally the expand up/down arrows are hidden at the start and end
of the buffers
---------
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Zed AI <claude-3.5-sonnet@zed.dev>
This moves spawning of the git subprocess to the main thread. We're not
yet
sure why, but when we spawn a process using GCD's background queues,
sub-processes like git-credential-manager fail to open windows.
This seems to be fixable either by using the main thread, or by using a
standard background thread,
but for now we use the main thread.
Release Notes:
- Git: Fix git-credential-manager
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
This PR does not close an issue, but it is an issue and and fix in one.
I hope this is ok, but please let me know if you prefer me to open an
issue before.
Release Notes:
- Add "copy permalink" action for self-hosted GitHub enterprise
instances
# Issue
### Related issues:
* https://github.com/zed-industries/zed/issues/26393
* https://github.com/zed-industries/zed/issues/11043
When you try to copy a permalink from a self-hosted GitHub enterprise
instance, you get the following error:
<img width="383" alt="permalink"
src="https://github.com/user-attachments/assets/b32338a7-a2d7-48fc-86bf-ade1d32ed1f7"
/>
You also cannot open a PR or commit when you hover over a git blame:
https://github.com/user-attachments/assets/a5491ce7-270b-412f-b9ac-027ec020b028
### Reproduce
If you do not have access to a self-hosted GitHub instance, you can
change the remote url of any git repo:
```
git remote set-url origin git@github.mycorp.com:nilskch/zed.git
```
With the fix, permalinks still won't bring you to a valid website, but
you can verify that they are correctly created.
# Solution
Currently, we only support detecting self-hosted GitLab instances, but
not self-hosted GitHub instances. We detect GitLab instances by checking
if "gitlab" is part of the git URL.
This PR adds the same logic to detect self-hosted GitHub enterprise
instances (by checking if "github" is in the URL).
This solution is not ideal, since self-hosted GitHub or GitLab instances
might not contain the word "github" or "gitlab". #26393 proposes adding
a setting that would allow users to map specific domains to their
corresponding git provider types. This mapping would help Zed correctly
identify the appropriate git instance, even if "gitlab" or "github" are
not part of the URL.
This PR does not implement the offered solution, but I added a TODO
where the fix for #26393 has to make changes.
- Truncate branch names based on the width of the picker
- Use a footer for "Create branch" instead of a picker entry
Still to do:
- [x] Select the footer button when no matches and run the create logic
on `enter`
- [x] Make it possible to quickly select the footer button from the
keyboard when there are matches
Release Notes:
- Git Beta: Removed limitation that made it impossible to create a
branch from the branch picker when it too closely resembled an existing
branch name
This PR finishes up the support for generating commit messages using an
LLM.
We're shelling out to `git diff` to get the diff text, as it seemed more
efficient than attempting to reconstruct the diff ourselves from our
internal Git state.
https://github.com/user-attachments/assets/9bcf30a7-7a08-4f49-a753-72a5d954bddd
Release Notes:
- Git Beta: Added support for generating commit messages using a
language model.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Release Notes:
- Git Beta: Fixed a bug where the branch selector would only show for
the first repository opened.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
Closes#10004
This PR adds support for the organize imports action. Previously, you
had to manually configure it in the settings and then use format to run
it.
Note: Default key binding will be `alt-shift-o` which is similar to
VSCode's organize import. Also, because `cmd-shift-o` is taken by
outline picker.
Todo:
- [x] Initial working
- [x] Handle remote
- [x] Handle multi buffer
- [x] Can we make it generic for executing any code action?
Release Notes:
- Added `editor:OrganizeImports` action to organize imports (sort,
remove unused, etc) for supported LSPs. You can trigger it by using the
`alt-shift-o` key binding.
https://github.com/zed-industries/zed/pull/25752 with fixes on top
* Ensures no flickering happens for all modifiers `: false` case
* Dismisses the toggled state on focus out
* Reworks cache state so that "enabled" and "toggled by modifiers" are
different states with their own lifecycle
Release Notes:
- N/A
This PR fixes a bug where using the project diff editor to restore hunks
from a file that's not open in its own buffer would cause those reverts
to be lost once the project diff drops its excerpts for that file.
The fix is to save the buffers after restoring them but before the
excerpts are (potentially) dropped. This is done for the project diff
editor only. If we fail to save the affected files, we add their buffers
to the active workspace, so that the reverted contents are preserved and
the user can try again to save them.
- [x] Get it working
- [x] Test
- [ ] ~~Clean up boolean soup~~
Co-authored-by: Max <max@zed.dev>
Release Notes:
- N/A
Like the real app, this one infinite loops if you have a diff in an
UnsharedFile.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This is a follow-up to https://github.com/zed-industries/zed/pull/25573.
We were still using the spend for a particular model when determining if
the user was over their maximum monthly spend instead of looking at the
usage across all models.
Release Notes:
- N/A
This PR adjusts the usage checks for the LLM free tier.
Previously we would limit the usage on a per-model basis, meaning the
user would get $10/mo free for each model they had access to.
We now have usage for all models count towards the free tier limit.
Release Notes:
- N/A
