Closes#36300
This PR follows Windows conventions by introducing
`KeybindingKeystroke`, so shortcuts now show up as `ctrl-shift-4`
instead of `ctrl-$`.
It also fixes issues with keyboard layouts: when `use_key_equivalents`
is set to true, keys are remapped based on their virtual key codes. For
example, `ctrl-\` on a standard English layout will be mapped to
`ctrl-ё` on a Russian layout.
Release Notes:
- N/A
---------
Co-authored-by: Kate <kate@zed.dev>
Rodio parts are well tested and need less configuration then the livekit
parts. I suspect there is a bug in the livekit configuration regarding
resampling. Rather then investigate that it seemed faster & easier to
swap in Rodio.
This opens the door to using other Rodio parts like:
- Decibel based volume control
- Limiter (prevents sound from becoming too loud)
- Automatic gain control
To use this add to settings:
```
"audio": {
"experimental.rodio_audio": true
}
```
Release Notes:
- N/A
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
This removes around 900 unnecessary clones, ranging from cloning a few
ints all the way to large data structures and images.
A lot of these were fixed using `cargo clippy --fix --workspace
--all-targets`, however it often breaks other lints and needs to be run
again. This was then followed up with some manual fixing.
I understand this is a large diff, but all the changes are pretty
trivial. Rust is doing some heavy lifting here for us. Once I get it up
to speed with main, I'd appreciate this getting merged rather sooner
than later.
Release Notes:
- N/A
Follow up to #36278 to ensure this bug is actually fixed. Also fixes
this on two layers and adds a test for the lower layer, as we cannot
properly test it in the UI.
Furthermore, this improves the error message to show some more context
and ensures the status toast is actually only shown when the keybind was
successfully updated: Before, we would show the success toast whilst
also showing an error in the editor.
Lastly, this also fixes some issues with the status toast (and
animations) where no status toast or no animation would show in certain
scenarios.
Release Notes:
- N/A
Release Notes:
- Settings can now be configured per operating system with the new
top-level fields: `"macos"`/`"windows"`/`"linux"`. These will override
user level settings, but are lower precedence than _release channel_
settings.
- Added profile selector to `zed > settings` submenu.
- Added examples to the `default.json` docs.
- Reduced length of the setting description that shows on autocomplete,
since it was cutoff in the autocomplete popover.
Release Notes:
- N/A
Settings Profiles
- [X] Allow profiles to be defined, where each profile can be any of
Zed's settings
- [X] Autocompletion of all settings
- [X] Errors on invalid keys
- [X] Action brings up modal that shows user-defined profiles
- [X] Alphabetize profiles
- [X] Ability to filter down via keyboard, and navigate via arrow up and
down
- [X] Auto select Disabled option by default (first in list, after
alphabetizing user-defined profiles)
- [X] Automatically select active profile on next picker summoning
- [X] Persist settings until toggled off
- [X] Show live preview as you select from the profile picker
- [X] Tweaking a setting, while in a profile, updates the profile live
- [X] Make sure actions that live update Zed, such as `cmd-0`, `cmd-+`,
and `cmd--`, work while in a profile
- [X] Add a test to track state
Release Notes:
- Added the ability to configure settings profiles, via the "profiles"
key. Example:
```json
{
"profiles": {
"Streaming": {
"agent_font_size": 20,
"buffer_font_size": 20,
"theme": "One Light",
"ui_font_size": 20
}
}
}
```
To set a profile, use `settings profile selector: toggle`
This change dims rows in the keymap editor for which the corresponding
keybind is overridden by other keybinds coming from higher priority
sources.
Release Notes:
- N/A
Closes #ISSUE
This change applies both to the UI (we render `<null>` as muted text
instead of `zed::NoAction`) as well as how we update the keymap file
(the duplicated binding is bound to `null` instead of `"zed::NoAction"`)
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes #ISSUE
This PR attempts to add workarounds for `use_key_equivalents` in the
keymap UI. First of all it makes it so that `use_key_equivalents` is
ignored when searching for a binding to replace so that replacing a
keybind with `use_key_equivalents` set to true does not result in a new
binding. Second, it attempts to infer the value of `use_key_equivalents`
off of a base binding when adding a binding by adding an optional `from`
parameter to the `KeymapUpdateOperation::Add` variant. Neither
workaround will work when the `from` binding for an add or the `target`
binding for a replace are not in the user keymap.
cc: @Anthony-Eid
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes #ISSUE
Makes it so that `KeymapFile::update_keybinding` treats removals of
bindings that weren't user-defined as creating a new binding to
`zed::NoAction`.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes #ISSUE
Previously, the keystroke input would be empty, even when editing an
existing binding. This meant you had to re-enter the bindings even if
you just wanted to edit the context. Now, the existing keystrokes are
rendered as a placeholder, are re-shown if newly entered keystrokes are
cleared, and will be returned from the `KeystrokeInput::keystrokes()`
method if no new keystrokes were entered.
Additionally fixed a bug in `KeymapFile::update_keybinding` where
semantically identical contexts would be treated as unequal due to
formatting differences.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes #ISSUE
Adds an action and special handling in `KeymapFile::update_keybinding`
for removals. If the binding being removed is the last in a keymap
section, the keymap section will be removed entirely instead of left
empty.
Still to do is the ability to unbind/remove non-user created bindings
such as those in the default keymap by binding them to `NoAction`,
however, this will be done in a follow up PR.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes #ISSUE
Adds a very simple editor for editing action input to the edit keybind
modal. No auto-complete yet.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes #ISSUE
Implements a very basic completion provider that is attached to the
context editor in the keybind editing modal.
The context identifiers used for completions are scraped from the
default, vim, and base keymaps on demand.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes #ISSUE
Adds a context input to the keybind edit modal. Also fixes some bugs in
the keymap update function to handle context changes gracefully. The
current keybind update strategy implemented in this PR is
* when the context doesn't change, just update the binding in place
* when the context changes, but the binding is the only binding in the
keymap section, update the binding _and_ context in place
* when the context changes, and the binding is _not_ the only binding in
the keymap section, remove the existing binding and create a new section
with the update context and binding so as to avoid impacting other
bindings
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Followup to #33678, doing the same thing for all JSON Schema files
provided to json-language-server
Release Notes:
* Added warnings for unknown fields when editing `tasks.json` /
`snippets.json`.
Closes#30017
* While generating the settings JSON schema, defaults all schema
definitions to reject unknown fields via `additionalProperties: false`.
* Uses `unevaluatedProperties: false` at the top level to check fields
that remain after the settings field names + release stage override
field names.
* Changes json schema version from `draft07` to `draft_2019_09` to have
support for `unevaluatedProperties`.
Release Notes:
- Added warnings for unknown fields when editing `settings.json`.
Adds the initial semblance of a keymap UI. It is currently gated behind the `settings-ui` feature flag. Follow up PRs will add polish and missing features.
Release Notes:
- N/A
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
Co-authored-by: Anthony <anthony@zed.dev>
The major change in schemars 1.0 is that now schemas are represented as
plain json values instead of specialized datatypes. This allows for more
concise construction and manipulation.
This change also improves how settings schemas are generated. Each top
level settings type was being generated as a full root schema including
the definitions it references, and then these were merged. This meant
generating all shared definitions multiple times, and might have bugs in
cases where there are two types with the same names.
Now instead the schemar generator's `definitions` are built up as they
normally are and the `Settings` trait no longer has a special
`json_schema` method. To handle types that have schema that vary at
runtime (`FontFamilyName`, `ThemeName`, etc), values of
`ParameterizedJsonSchema` are collected by `inventory`, and the schema
definitions for these types are replaced.
To help check that this doesn't break anything, I tried to minimize the
overall [schema
diff](https://gist.github.com/mgsloan/1de549def20399d6f37943a3c1583ee7)
with some patches to make the order more consistent + schemas also
sorted with `jq -S .`. A skim of the diff shows that the diffs come
from:
* `enum: ["value"]` turning into `const: "value"`
* Differences in handling of newlines for "description"
* Schemas for generic types no longer including the parameter name, now
all disambiguation is with numeric suffixes
* Enums now using `oneOf` instead of `anyOf`.
Release Notes:
- N/A
Closes #ISSUE
The ability to update user keybindings in their keymap is required for
#32436. This PR adds the ability to do so, reusing much of the existing
infrastructure for updating settings JSON files.
However, the existing JSON update functionality was intended to work
only with objects, therefore, this PR simply wraps the object updating
code with non-general keymap-specific array updating logic, that only
works for top-level arrays and can only append or update entries in said
top-level arrays. This limited API is reflected in the limited
operations that the new `update_keymap` method on `KeymapFile` can take
as arguments.
Additionally, this PR pulls out the existing JSON updating code into its
own module (where array updating code has been added) and adds a
significant number of tests (hence the high line count in the diff)
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes #ISSUE
Adds a very simple API to track metadata about keybindings in GPUI,
namely the source of the binding. The motivation for this is displaying
the source of keybindings in the [keymap
UI](https://github.com/zed-industries/zed/pull/32436).
The API is designed to be as simple and flexible as possible, storing
only a `Option<u32>` on the bindings themselves to keep the struct
small. It is intended to be used as an index or key into a table/map
created and managed by the consumer of the API to map from indices to
arbitrary meta-data. I.e. the consumer is responsible for both
generating these indices and giving them meaning.
The current usage in Zed is stateless, just a mapping between constants
and User, Default, Base, and Vim keymap sources, however, this can be
extended in the future to also track _which_ base keymap is being used.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Instead of a menagerie of macros for implementing `Action`, now there
are just two:
* `actions!(editor, [MoveLeft, MoveRight])`
* `#[derive(..., Action)]` with `#[action(namespace = editor)]`
In both contexts, `///` doc comments can be provided and will be used in
`JsonSchema`.
In both contexts, parameters can provided in `#[action(...)]`:
- `namespace = some_namespace` sets the namespace. In Zed this is
required.
- `name = "ActionName"` overrides the action's name. This must not
contain "::".
- `no_json` causes the `build` method to always error and
`action_json_schema` to return `None`
and allows actions not implement `serde::Serialize` and
`schemars::JsonSchema`.
- `no_register` skips registering the action. This is useful for
implementing the `Action` trait
while not supporting invocation by name or JSON deserialization.
- `deprecated_aliases = ["editor::SomeAction"]` specifies deprecated old
names for the action.
These action names should *not* correspond to any actions that are
registered. These old names
can then still be used to refer to invoke this action. In Zed, the
keymap JSON schema will
accept these old names and provide warnings.
- `deprecated = "Message about why this action is deprecation"`
specifies a deprecation message.
In Zed, the keymap JSON schema will cause this to be displayed as a
warning. This is a new feature.
Also makes the following changes since this seems like a good time to
make breaking changes:
* In `zed.rs` tests adds a test with an explicit list of namespaces. The
rationale for this is that there is otherwise no checking of `namespace
= ...` attributes.
* `Action::debug_name` renamed to `name_for_type`, since its only
difference with `name` was that it
* `Action::name` now returns `&'static str` instead of `&str` to match
the return of `name_for_type`. This makes the action trait more limited,
but the code was already assuming that `name_for_type` is the same as
`name`, and it requires `&'static`. So really this just makes the trait
harder to misuse.
* Various action reflection methods now use `&'static str` instead of
`SharedString`.
Release Notes:
- N/A
Still a work in progress! Todos before merging:
- [x] Allow to delete (not just turn off) an MCP server from the panel's
settings view
- [x] Also uninstall the extension upon deleting the server (check if
the extension just provides MCPs)
- [x] Resolve repository URL again
- [x] Add a button to open the configuration modal from the panel's
settings view
- [x] Improve modal UX to install and configure a non-extension MCP
Release Notes:
- N/A
---------
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
* Fixes a bug where for Cursor, `config_dir()` (Zed's config dir) was
being used instead of `dirs::config_dir` (`~/.config` /
`$XDG_CONFIG_HOME`).
* Adds support for windows, before it was using the user profile folder
+ `/.config` which is incorrect.
* Now looks using a variety of product names - `["Code", "Code - OSS",
"Code Dev", "Code - OSS Dev", "code-oss-dev", "VSCodium"]`.
* Now shows settings path that was read before confirming import.
Including this path in the confirmation modal is a bit ugly (making it
link-styled and clickable would be nice), but I think it's better to
include it now that it is selecting the first match of a list of
candidate paths:
Release Notes:
- Added more settings file locations to check for VS Code / Cursor
settings import.
Closes#29229
Release Notes:
- Extended the support for configuring custom git hosting providers to
cover project settings in addition to global settings.
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
This PR updates the name of the `NewSessionModal` to `NewProcessModal`
(to reflect it's new purpose), changes the tabs in the modal to read
`Run | Debug | Attach | Launch` and changes the associated types in code
to match the tabs. In addition, this PR adds a few labels to the text
fields in the `Launch` tab, and adds a link to open the associated
settings file. In both debug.json files, added links to the zed.dev
debugger docs.
Release Notes:
- Debugger Beta: Improve the new process modal
Closes #ISSUE
Release Notes:
- Added support for importing settings from cursor. Cursor settings can
be imported using the `zed: import cursor settings` command from the
command palette
https://github.com/zed-industries/zed/issues/30972 brought up another
case where our context is not enough to track the actual source of the
issue: we get a general top-level error without inner error.
The reason for this was `.ok_or_else(|| anyhow!("failed to read HEAD
SHA"))?; ` on the top level.
The PR finally reworks the way we use anyhow to reduce such issues (or
at least make it simpler to bubble them up later in a fix).
On top of that, uses a few more anyhow methods for better readability.
* `.ok_or_else(|| anyhow!("..."))`, `map_err` and other similar error
conversion/option reporting cases are replaced with `context` and
`with_context` calls
* in addition to that, various `anyhow!("failed to do ...")` are
stripped with `.context("Doing ...")` messages instead to remove the
parasitic `failed to` text
* `anyhow::ensure!` is used instead of `if ... { return Err(...); }`
calls
* `anyhow::bail!` is used instead of `return Err(anyhow!(...));`
Release Notes:
- N/A
Closes #ISSUE
Release Notes:
- Breaking change: The actions used while developing Zed have been
renamed from `debug:` to `dev:` to avoid confusion with the new debugger
feature:
- - `dev::OpenDebugAdapterLogs`
- - `dev::OpenSyntaxTreeView`
- - `dev::OpenThemePreview`
- - `dev::OpenLanguageServerLogs`
- - `dev::OpenKeyContextView`
Adds a `global_settings.json` file which can be set up by enterprises
with automation, enabling setting settings like edit provider by default
without interfering with user's settings files.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
