Closes#21198
Release Notes:
- Adds support for `:norm`
- Allows for vim and zed style modified keys specified in issue
- Vim style <C-w> and zed style <ctrl-w>
- Differs from vim in how multi-line is handled
- vim is sequential
- zed is combinational (with multi-cursor)
Closes#7759
While opening a new SSH project if we are reusing an existing window,
i.e. drop the existing workspace and create a new one, then before
dropping it, we should remove `session_id` from that workspace's
serialized entry. That way:
1. Upon closing (cmd-w) this remote workspace (which also clears
`session_id` for this), and then quitting. No workspace with that
`session_id` is found, and it starts fresh.
2. Upon directly quitting (cmd-q) this remote workspace, only this
workspace exists in db (among two of them) with that `session_id`, and
it restores correctly.
Release Notes:
- Fixed an issue while closing remote workspace restores last local
workspace on startup.
Closes#34924
Now, when `local_paths` are empty, we detach `session_id` from that
workspace serialization item. This way, when we restore it using the
default "last_session", we don't restore this workspace back. This is
same as when we use `cmd-w` to close window, which also sets
`session_id` to `None` before serialization.
Release Notes:
- Fixed an issue where last removed folder from workspace used to reopen
on Zed startup.
This is following feedback from folks that were searching the "close
others" action, available in the tab's context menu, and not finding it
because it was actually named "close inactive", which was confusing. So,
this PR makes sure the tab's menu item and the action have consistent
naming.
Release Notes:
- Rename "CloseInactiveItems" action to "CloseOtherItems" for naming
consistency.
This PR adds action `editor: toggle focus` which focuses to last active
editor pane item in workspace.
Release Notes:
- Added `editor: toggle focus` action, which focuses to last active
editor pane item.
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Closes#33972
As noted on
https://github.com/zed-industries/zed/pull/31390#discussion_r2147473526,
when splitting panes and having a border size set for the active pane,
or the minimap visibility configured to the active editor only, zed will
shortly show a flicker of the border or the minimap on the pane that's
being deactivated.
Release Notes:
- Fixed an issue where pane activations would sometimes have a brief
delay, causing a flicker in the process.
Closes#33445
Fixed the "Close others" context menu action to close tabs relative to
the right-clicked tab instead of the currently active tab. Previously,
when right-clicking on an inactive tab and selecting "Close others", it
would keep the active tab open rather than the right-clicked tab.
## Before/After
https://github.com/user-attachments/assets/d76854c3-c490-4a41-8166-309dec26ba8a
## Changes
- Modified `close_inactive_items()` method to accept an optional
`target_item_id` parameter
- Updated context menu handler to pass the right-clicked tab's ID as the
target
- Maintained backward compatibility by defaulting to active tab when no
target is specified
- Updated all existing call sites to pass `None` for the new parameter
Release Notes:
- Fixed: "Close others" context menu action now correctly keeps the
right-clicked tab open instead of the active tab
Fixes an issue that caused Windows to fail when removing extension's
directories, as Zed had never stop any related processes.
Now:
* Zed shuts down and waits until the end when the language servers are
shut down
* Adds `impl Drop for WasmExtension` where does
`self.tx.close_channel();` to stop a receiver loop that holds the "lock"
on the extension's work dir.
The extension was dropped, but the channel was not closed for some
reason.
* Does more unregistration to ensure `Arc<WasmExtension>` with the `tx`
does not leak further
* Tidies up the related errors which had never reported a problematic
path before
Release Notes:
- N/A
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Co-authored-by: Smit <smit@zed.dev>
Partial fix for #31330
It fix the problem that the inset stay on after switching to SSD, but it
still have the problem that after that first redraw, it have the wrong
size. Just resizing it even once work. I guess the relevant code to fix
that would be ``handle_toplevel_decoration_event`` of
``crates/gpui/src/platform/linux/wayland/window.rs``, but trying to call
resize here does not seems to work correctly (might be just wrong
argument), and I would like to take a break on that for now.
Release Notes:
- N/A
(better wait for that to be completely fixed before adding it in the
changelog)
---------
Co-authored-by: Michael Sloan <michael@zed.dev>
Closes #ISSUE
Adds a new `documentation` method to actions, that is extracted from doc
comments when using the `actions!` or derive macros.
Additionally, this PR adds doc comments to as many action definitions in
Zed as possible.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
* Add a "close item"-like binding to close the active dock, if present
Now, cmd/ctrl-w can be used close the focused dock before the Zed window
* Add defaults to MoveItem* actions to make it appear in the command
palette
Release Notes:
- N/A
We reworked the debug modal spawning to use the task context from past
debug sessions when spawning a debug scenario based on task inventory
history.
We changed restart session keybinding to rerun session too.
Closes#31369
Release Notes:
- Restarting a debug session now reruns build tasks that are associated
with the session
---------
Co-authored-by: Cole Miller <cole@zed.dev>
This is an easy way to shave some microseconds off the critical path for
frame rendering. On my machine this reduces typical frame rendering
latency by ~100 microseconds, probably quite a bit more on slower
machines.
Here is how long it typically takes to drop elements from the arena,
from a fairly brief run:
Release Notes:
- N/A
Instead of a menagerie of macros for implementing `Action`, now there
are just two:
* `actions!(editor, [MoveLeft, MoveRight])`
* `#[derive(..., Action)]` with `#[action(namespace = editor)]`
In both contexts, `///` doc comments can be provided and will be used in
`JsonSchema`.
In both contexts, parameters can provided in `#[action(...)]`:
- `namespace = some_namespace` sets the namespace. In Zed this is
required.
- `name = "ActionName"` overrides the action's name. This must not
contain "::".
- `no_json` causes the `build` method to always error and
`action_json_schema` to return `None`
and allows actions not implement `serde::Serialize` and
`schemars::JsonSchema`.
- `no_register` skips registering the action. This is useful for
implementing the `Action` trait
while not supporting invocation by name or JSON deserialization.
- `deprecated_aliases = ["editor::SomeAction"]` specifies deprecated old
names for the action.
These action names should *not* correspond to any actions that are
registered. These old names
can then still be used to refer to invoke this action. In Zed, the
keymap JSON schema will
accept these old names and provide warnings.
- `deprecated = "Message about why this action is deprecation"`
specifies a deprecation message.
In Zed, the keymap JSON schema will cause this to be displayed as a
warning. This is a new feature.
Also makes the following changes since this seems like a good time to
make breaking changes:
* In `zed.rs` tests adds a test with an explicit list of namespaces. The
rationale for this is that there is otherwise no checking of `namespace
= ...` attributes.
* `Action::debug_name` renamed to `name_for_type`, since its only
difference with `name` was that it
* `Action::name` now returns `&'static str` instead of `&str` to match
the return of `name_for_type`. This makes the action trait more limited,
but the code was already assuming that `name_for_type` is the same as
`name`, and it requires `&'static`. So really this just makes the trait
harder to misuse.
* Various action reflection methods now use `&'static str` instead of
`SharedString`.
Release Notes:
- N/A
This PR adds an optional `clone: bool` argument to
`workspace::MoveItemToPane` and `workspace::MoveItemToPaneInDirection`
which causes the item to be cloned into the destination pane rather than
moved. It provides similar functionality to
`workbench.action.splitEditorToRightGroup` in vscode.
This PR supercedes #25030.
Closes#24889
Release Notes:
- Add optional `clone: bool` (default: `false`) to
`workspace::MoveItemToPane` and `workspace::MoveItemToPaneInDirection`
which causes the item to be cloned into the destination pane rather than
moved.
Closes#32688
Release Notes:
- Fixed tasks (including build tasks for debug configurations) silently
using `/` as a working directory when the specified `cwd` didn't exist.
Closes#32297
Changes:
- Added restoration of `workspace.centered_layout` from
`serialized.centered_layout`
- Ensures the centered layout state persists across project switches
Release Notes:
- Fixed centered layout not persisting when switching between projects
As part of this I refactored the logic that enabled/disabled actions in
the debugger to happen at action registration time instead of using
command palette filters. This allows the menu to grey out actions correctly.
Release Notes:
- Add a "Run" menu to contain tasks and debugger
Follow-up to #24797
This PR ensures some cursor styles do not change for draggable elements
during dragging. The linked PR covered this on the higher level for
draggable divs. However, e.g. the pane divider inbetween two editors is
not a draggable div and thus still has the issue that the cursor style
changes during dragging. This PR fixes this issue by setting the hitbox
to `None` in cases where the element is currently being dragged, which
ensures the cursor style is applied to the cursor no matter what during
dragging.
Namely, this change fixes this for
- non-div pane dividers
- minimap slider and the
- editor scrollbars
and implements it for the UI scrollbars (Notably, UI scrollbars do
already have `cursor_default` on their parent container but would not
keep this during dragging. I opted out on removing this from the parent
containers until #30194 or a similar PR is merged).
https://github.com/user-attachments/assets/f97859dd-5f1d-4449-ab92-c27f2d933c4a
Release Notes:
- N/A
Cleaner to have references to this be `toast::RunAction` matching how it
appears in the keymap, instead of `workspace::RunAction`.
Release Notes:
- N/A
Closes [#13107](https://github.com/zed-industries/zed/issues/13107)
Enabled pull diagnostics by default, for the language servers that
declare support in the corresponding capabilities.
```
"diagnostics": {
"lsp_pull_diagnostics_debounce_ms": null
}
```
settings can be used to disable the pulling.
Release Notes:
- Added support for the LSP `textDocument/diagnostic` command.
# Brief
This is draft PR that implements the LSP `textDocument/diagnostic`
command. The goal is to receive your feedback and establish further
steps towards fully implementing this command. I tried to re-use
existing method and structures to ensure:
1. The existing functionality works as before
2. There is no interference between the diagnostics sent by a server and
the diagnostics requested by a client.
The current implementation is done via a new LSP command
`GetDocumentDiagnostics` that is sent when a buffer is saved and when a
buffer is edited. There is a new method called `pull_diagnostic` that is
called for such events. It has debounce to ensure we don't spam a server
with commands every time the buffer is edited. Probably, we don't need
the debounce when the buffer is saved.
All in all, the goal is basically to get your feedback and ensure I am
on the right track. Thanks!
## References
1.
https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#textDocument_pullDiagnostics
## In action
You can clone any Ruby repo since the `ruby-lsp` supports the pull
diagnostics only.
Steps to reproduce:
1. Clone this repo https://github.com/vitallium/stimulus-lsp-error-zed
2. Install Ruby (via `asdf` or `mise).
4. Install Ruby gems via `bundle install`
5. Install Ruby LSP with `gem install ruby-lsp`
6. Check out this PR and build Zed
7. Open any file and start editing to see diagnostics in realtime.
https://github.com/user-attachments/assets/0ef6ec41-e4fa-4539-8f2c-6be0d8be4129
---------
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Re: #19015Close#12667
When dragging a dock’s resize handle, only the active panel grows or
shrinks. This patch introduces an opt-in behaviour that lets users
resize every panel hosted by that dock at once.
Release Notes:
- Added new `resize_all_panels_in_dock` setting to optionally resize
every panel in a dock together.
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Closes#27982
Release Notes:
- Added `close_on_file_delete` setting (off by default) to allow closing
open files after they have been deleted on disk
---------
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
Release Notes:
- Debugger Beta: if there is no stopped or running session, `f5` now
reruns the last session, or opens the new session modal if there is no
previously-run session.
Closes#27579
This PR fixes issue where keybinding wouldn’t work in a pane after
focusing it from dock using the `ActivatePaneInDirection` action in
certain cases.
https://github.com/user-attachments/assets/9ceca580-a63f-4807-acff-29b61819f424
Release Notes:
- Fixed the issue where keybinding wouldn’t work in a pane after
focusing it from dock using the `ActivatePaneInDirection` action in
certain cases.
This PR adds a comprehensive test that ensures that no item-closing
action will panic when no items are present. A test already existed
(`test_remove_active_empty `) that ensured `CloseActiveItem` didn't
panic, but the new test covers:
- `CloseActiveItem`
- `CloseInactiveItems`
- `CloseAllItems`
- `CloseCleanItems`
- `CloseItemsToTheRight`
- `CloseItemsToTheLeft`
I plan to do a bit more clean up in `pane.rs` and this feels like a good
thing to add before that.
Release Notes:
- N/A
Release Notes:
- Debugger Beta: added a button to the quick action bar to start a debug
session or spawn a task, depending on which of these actions was taken
most recently.
- Debugger Beta: incorporated the tasks modal into the new session modal
as an additional tab.
---------
Co-authored-by: Julia Ryan <juliaryan3.14@gmail.com>
Co-authored-by: Julia Ryan <p1n3appl3@users.noreply.github.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Mikayla <mikayla@zed.dev>
tl;dr: This adds `.block_mouse_except_scroll()` which should typically
be used instead of `.occlude()` for cases when the mouse shouldn't
interact with elements drawn below an element. The rationale for
treating scroll events differently:
* Mouse move / click / styles / tooltips are for elements the user is
interacting with directly.
* Mouse scroll events are about finding the current outer scroll
container.
Most use of `occlude` should probably be switched to this, but I figured
I'd derisk this change by minimizing behavior changes to just the 3 uses
of `block_mouse_except_scroll`.
GPUI changes:
* Added `InteractiveElement::block_mouse_except_scroll()`, and removes
`stop_mouse_events_except_scroll()`
* Added `Hitbox::should_handle_scroll()` to be used when handling scroll
wheel events.
* `Window::insert_hitbox` now takes `HitboxBehavior` instead of
`occlude: bool`.
- `false` for that bool is now `HitboxBehavior::Normal`.
- `true` for that bool is now `HitboxBehavior::BlockMouse`.
- The new mode is `HitboxBehavior::BlockMouseExceptScroll`.
* Removes `Default` impl for `HitboxId` since applications should not
manually create `HitboxId(0)`.
Release Notes:
- N/A
Open inspector with `dev: toggle inspector` from command palette or
`cmd-alt-i` on mac or `ctrl-alt-i` on linux.
https://github.com/user-attachments/assets/54c43034-d40b-414e-ba9b-190bed2e6d2f
* Picking of elements via the mouse, with scroll wheel to inspect
occluded elements.
* Temporary manipulation of the selected element.
* Layout info and JSON-based style manipulation for `Div`.
* Navigation to code that constructed the element.
Big thanks to @as-cii and @maxdeviant for sorting out how to implement
the core of an inspector.
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Co-authored-by: Federico Dionisi <code@fdionisi.me>
This affects python's when debugging because the selected toolchain is
used as the python binary to spawn Debugpy
Release Notes:
- Fix bug where selected toolchain didn't exist
https://github.com/zed-industries/zed/issues/30972 brought up another
case where our context is not enough to track the actual source of the
issue: we get a general top-level error without inner error.
The reason for this was `.ok_or_else(|| anyhow!("failed to read HEAD
SHA"))?; ` on the top level.
The PR finally reworks the way we use anyhow to reduce such issues (or
at least make it simpler to bubble them up later in a fix).
On top of that, uses a few more anyhow methods for better readability.
* `.ok_or_else(|| anyhow!("..."))`, `map_err` and other similar error
conversion/option reporting cases are replaced with `context` and
`with_context` calls
* in addition to that, various `anyhow!("failed to do ...")` are
stripped with `.context("Doing ...")` messages instead to remove the
parasitic `failed to` text
* `anyhow::ensure!` is used instead of `if ... { return Err(...); }`
calls
* `anyhow::bail!` is used instead of `return Err(anyhow!(...));`
Release Notes:
- N/A
This is a more generic implementation of
https://github.com/zed-industries/zed/pull/30360
This also removes the need for a separate close action for the git
panel.
The downside is maybe it is harder to find since it is less specific.
Release Notes:
- workspace: Added new `workspace: close active dock` action to close
the currently focused dock
