Same as `editor::RestartLanguageServer`, now there's an
`editor::StopLanguageServer` action that stops all language servers,
related to the currently opened editor.
Opening another singleton editor with the same language or changing
selections in a multi buffer will bring the servers back up.
Release Notes:
- Added a way to temporarily stop LSP servers
---------
Co-authored-by: Michael Sloan <mgsloan@gmail.com>
Release Notes:
- Fixed a bug where Zed sometimes added multiple redundant FS watchers
when language servers requested to watch paths. This could cause saves
and git operations to fail if Zed exceeded the file descriptor limit.
---------
Co-authored-by: Piotr <piotr@zed.dev>
This adds a "workspace-hack" crate, see
[mozilla's](https://hg.mozilla.org/mozilla-central/file/3a265fdc9f33e5946f0ca0a04af73acd7e6d1a39/build/workspace-hack/Cargo.toml#l7)
for a concise explanation of why this is useful. For us in practice this
means that if I were to run all the tests (`cargo nextest r
--workspace`) and then `cargo r`, all the deps from the previous cargo
command will be reused. Before this PR it would rebuild many deps due to
resolving different sets of features for them. For me this frequently
caused long rebuilds when things "should" already be cached.
To avoid manually maintaining our workspace-hack crate, we will use
[cargo hakari](https://docs.rs/cargo-hakari) to update the build files
when there's a necessary change. I've added a step to CI that checks
whether the workspace-hack crate is up to date, and instructs you to
re-run `script/update-workspace-hack` when it fails.
Finally, to make sure that people can still depend on crates in our
workspace without pulling in all the workspace deps, we use a `[patch]`
section following [hakari's
instructions](https://docs.rs/cargo-hakari/0.9.36/cargo_hakari/patch_directive/index.html)
One possible followup task would be making guppy use our
`rust-toolchain.toml` instead of having to duplicate that list in its
config, I opened an issue for that upstream: guppy-rs/guppy#481.
TODO:
- [x] Fix the extension test failure
- [x] Ensure the dev dependencies aren't being unified by Hakari into
the main dependencies
- [x] Ensure that the remote-server binary continues to not depend on
LibSSL
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
This PR adds `completions.lsp_insert_mode` and effectively changes the
default from `"replace"` to `"replace_suffix"`, which automatically
detects whether to use the LSP `replace` range instead of `insert`
range.
`"replace_suffix"` was chosen as a default because it's more
conservative than `"replace_subsequence"`, considering that deleting
text is usually faster and less disruptive than having to rewrite a long
replaced word.
Fixes#27197Fixes#23395 (again)
Fixes#4816 (again)
Release Notes:
- Added new setting `completions.lsp_insert_mode` that changes what will
be replaced when an LSP completion is accepted. The default is
`"replace_suffix"`, but it accepts 4 values: `"insert"` for replacing
only the text before the cursor, `"replace"` for replacing the whole
text, `"replace_suffix"` that acts like `"replace"` when the text after
the cursor is a suffix of the completion, and `"replace_subsequence"`
that acts like `"replace"` when the text around your cursor is a
subsequence of the completion (similiar to a fuzzy match). Check [the
documentation](https://zed.dev/docs/configuring-zed#LSP-Insert-Mode) for
more information.
---------
Co-authored-by: João Marcos <marcospb19@hotmail.com>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR adds passing in `stop_on_entry` to debug configs in debug.json
instead of going through initialization args.
This has two benefits:
1. It's more streamlined to a user since every internal adapter supports
`stop_on_entry` for launch requests and Go's adapter supports it for
attach requests too.
2. It will allow @osiewicz `NewSesssionModal` PR to use this field for
the stop on entry checkbox.
Release Notes:
- N/A
This fixes a bug in #27568 that caused flickering in the git panel's
checkbox state when staging and unstaging entire files. The problem is
that that stage/unstage action first saves the target path (if it's open
as a buffer), and we do a targeted git status scan in response to that
filesystem event, which makes its way to the git panel and causes it to
clear its pending state before the actual stage or unstage has gone
through.
The fix is to not clear the panel's pending state for git repository
events that originated from a targeted scan (i.e. one that was triggered
by FS events for repo paths, as opposed to events inside `.git` which
cause all statuses to be recomputed).
Release Notes:
- N/A
This PR completes the process of moving git repository state storage and
scanning logic from the worktree crate to `project::git_store`.
Release Notes:
- N/A
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Conrad <conrad@zed.dev>
This PR fixes two bugs that cause unexpected behavior with breakpoints.
The first bug made it impossible to delete the last breakpoint in a file
in the workspace's database. This caused deleted breakpoints to remain
in the database and added to new projects.
The second bug was an edge case in the breakpoint context menu where
disabling/enabling a breakpoint would sometimes set a new breakpoint on
top of the old breakpoint.
Release Notes:
- N/A
This PR adds functionality for loading the diff for an arbitrary git
commit, and displaying it in a tab. To retrieve the diff for the commit,
I'm using a single `git cat-file --batch` invocation to efficiently load
both the old and new versions of each file that was changed in the
commit.
Todo
* Features
* [x] Open the commit view when clicking the most recent commit message
in the commit panel
* [x] Open the commit view when clicking a SHA in a git blame column
* [x] Open the commit view when clicking a SHA in a commit tooltip
* [x] Make it work over RPC
* [x] Allow buffer search in commit view
* [x] Command palette action to open the commit for the current blame
line
* Styling
* [x] Add a header that shows the author, timestamp, and the full commit
message
* [x] Remove stage/unstage buttons in commit view
* [x] Truncate the commit message in the tab
* Bugs
* [x] Dedup commit tabs within a pane
* [x] Add a tooltip to the tab
Release Notes:
- Added the ability to show past commits in Zed. You can view the most
recent commit by clicking its message in the commit panel. And when
viewing a git blame, you can show any commit by clicking its sha.
## Summary
This PR starts the process of adding debug task locators to Zed's
debugger system. A task locator is a secondary resolution phase that
allows a debug task to run a command before starting a debug session and
then uses the output of the run command to configure itself.
Locators are most applicable when debugging a compiled language but will
be helpful for any language as well.
## Architecture
At a high level, this works by adding a debug task queue to `Workspace`.
Which add's a debug configuration associated with a `TaskId` whenever a
resolved task with a debug config is added to `TaskInventory`'s queue.
Then, when the `SpawnInTerminal` task finishes running, it emits its
task_id and the result of the ran task.
When a ran task exits successfully, `Workspace` tells `Project` to start
a debug session using its stored debug config, then `DapStore` queries
the `LocatorStore` to configure the debug configuration if it has a
valid locator argument.
Release Notes:
- N/A
This is a slight refactor that flattens Breakpoint struct in
anticipation of condition/hit breakpoints. It also adds a slight delay
before breakpoints are shown on gutter hover to make breakpoints less
attention grabbing.
Release Notes:
- N/A
When a file is deleted outside of Zed, but it doesn't have any unsaved
changes, it shouldn't be considered "dirty" (prompting you before you
close it).
Release Notes:
- Fixed an bug where unchanged buffers were marked as conflicting if
their files were deleted outside of Zed.
---------
Co-authored-by: Antonio <antonio@zed.dev>
Fixes running git push on a coder instance.
Closes #ISSUE
Release Notes:
- Zed will now use `GIT_ASKPASS` if you already have one set instead of
overriding with our own. Fixes `git push` in Coder.
This PR does three things
- Right clicking within the gutter outside of the gutter fold area
bounds opens a breakpoint context menu
- Disabled breakpoints are now outline with the debugger accent color
instead of being fully colored at half opacity
- Clicking a breakpoint acts differently now
- Clicking a breakpoint while holding the platform modifier key will
disable/enable it
- Clicking a breakpoint hint while holding the platform modifier key
will set a disabled breakpoint
- Clicking a disabled breakpoint will enable it instead of deleting it
Release Notes:
- N/A
This PR adds two more cases to existing LSP completion cases.
- When text_edit exists: (New test)
1. we use text_edit, over insert_text and label
- When edit range exists (and text_edit is None): (New test)
1. insert_text is used over label if exists
2. label is used otherwise
- When not edit range exists (and text_edit is None): (Existing test)
1. insert_text is used over label if exists
2. label is used otherwise
Release Notes:
- N/A
This is a clean-up PR in anticipation of introduction of Debugger
Registry. I wanna get rid of DebugAdapterKind (or rather, it being an
enum).
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Closes#25761#21603
When `text_edit` is not available we directly fallback to to `label`.
That means, when we have range to replace, we never use `insertText` and
only use it when we haven't found any range.
This PR fixes, this and uses `insertText` as fallback first, and then
`label`.
Release Notes:
- Fixed an issue where accepting LSP snippet completion would insert the
label instead of expanding the snippet.
This is another in the series of PRs to make the GitStore own all
repository state and enable better concurrency control for git
repository scans.
After this PR, the `RepositoryEntry`s stored in worktree snapshots are
used only as a staging ground for local GitStores to pull from after
git-related events; non-local worktrees don't store them at all,
although this is not reflected in the types. GitTraversal and other
places that need information about repositories get it from the
GitStore. The GitStore also takes over handling of the new
UpdateRepository and RemoveRepository messages. However, repositories
are still discovered and scanned on a per-worktree basis, and we're
still identifying them by the (worktree-specific) project entry ID of
their working directory.
- [x] Remove WorkDirectory from RepositoryEntry
- [x] Remove worktree IDs from repository-related RPC messages
- [x] Handle UpdateRepository and RemoveRepository RPCs from the
GitStore
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This ensures that we do not get a bunch of error logs when using the
symbol search:
```
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:33+01:00 ERROR project] Method not found
...
```
Release Notes:
- N/A
This PR adds the ability to enable/disable breakpoints. It also fixes a
bug where toggling a log breakpoint from the breakpoint context menu
would add a standard breakpoint on top of the log breakpoint instead of
deleting it.
todo:
- [x] Add `BreakpointState` field Breakpoint that manages if a
breakpoint is active or not
- [x] Don't send disabled breakpoints to DAP servers - in progress
- [x] Half the opacity of disabled breakpoints - in progress
- [x] Add `BreakpointState` to database
- [x] Editor test for enabling/disabling breakpoints
- [ ] Integration Test to make sure we don't send disabled breakpoints
to DAP servers
- [x] Database test to make sure we properly serialize/deserialize
BreakpointState
Release Notes:
- N/A
---------
Co-authored-by: Piotr <piotr@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
This PR adds an action that clears all breakpoints and notifies any
active DAPs.
todo
- [x] Implement clear functionality
- [x] Write an integration test for this
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
