In project panel, `rename` and `duplicate` action further needs user
input for editing, so if panel is closed we should open it.
Release Notes:
- Fixed project panel not opening when `project panel: rename` and
`project panel: duplicate` actions are triggered from workspace.
the change was made in https://github.com/zed-industries/zed/pull/34223
for unknown reason. it wasn't required actually, and the code can be
safely left as before
update: after this revert Zed compiles with MinGW as before
Release Notes:
- N/A
Closes#34826
In move line up method, make use of `prev_line_boundary` which accounts
for fold map, etc., for selection start row so that we don't incorrectly
calculate row range to move up.
Release Notes:
- Fixed an issue where `editor: move line up` action sometimes crashed
if the cursor was at the end of a line beside a fold marker.
Mistral released their new DevstralMedium model to be used via API:
https://mistral.ai/news/devstral-2507
Release Notes:
- Add support for Mistral Devstral Medium
This PR splits the resize logic into separate left/right propagation
methods and improve code organization around column width adjustments.
It also allows resize to work for both the left and right sides as well,
instead of only checking the right side for room
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
This change dims rows in the keymap editor for which the corresponding
keybind is overridden by other keybinds coming from higher priority
sources.
Release Notes:
- N/A
This PR adds resizable columns to the keymap editor and the ability to
double-click on a resizable column to set a column back to its default
size.
The table uses a column's width to calculate what position it should be
laid out at. So `column[i]` x position is calculated by the summation of
`column[..i]`. When resizing `column[i]`, `column[i+1]`’s size is
adjusted to keep all columns’ relative positions the same. If
`column[i+1]` is at its minimum size, we keep seeking to the right to
find a column with space left to take.
An improvement to resizing behavior and double-clicking could be made by
checking both column ranges `0..i-1` and `i+1..COLS`, since only one
range of columns is checked for resize capacity.
Release Notes:
- N/A
---------
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Remco Smits <djsmits12@gmail.com>
As suggested in https://github.com/zed-industries/zed/pull/34418, this
proposes various changes to language configs to make block comments and
doc-block-style comments more similar. In doing so, it introduces some
breaking changes into the extension schema.
This change is needed to support the changes I'm working on in #34418,
to be able to support `rewrap` in block comments like `/* really long
comment ... */`. As is, we can do this in C-style doc-block comments (eg
`/** ... */`) because of the config in `documentation`, but we can't do
this in regular block comments because we lack the info about what the
line prefix and indentation should be.
And while I was here, I did various other clean-ups, many of which feel
nice but are optional.
I would love special attention on the changes to the schema, version and
related changes; I'm totally unfamiliar with that part of Zed.
**Summary of changes**
- break: changes type of `block_comment` to same type as
`documentation_comment` (**this is the important change**)
- break: rename `documentation` to `documentation_comment` (optional,
but improves consistency w/ `line_comments` and `block_comment`)
- break/refactor?: removes some whitespace in the declaration of
`block_comment` delimiters (optional, may break things, need input; some
langs had no spaces, others did)
- refactor: change `tab_size` from `NonZeroU32` to just a `u32` (some
block comments don't seem to need/want indent past the initial
delimiter, so we need this be 0 sometimes)
- refactor: moves the `documentation_comment` declarations to appear
next to `block_comment`, rearranges the order of the fields in the TOML
for `documentation_comment`, rename backing `struct` (all optional)
**Future scope**
I believe that this will also allow us to extend regular block comments
on newline – as we do doc-block comments – but I haven't looked into
this yet. (eg, in JS try pressing enter in both of these: `/* */` and
`/** */`; the latter should extend w/ a `*` prefixed line, while the
former does not.)
Release Notes:
- BREAKING CHANGE: update extension schema version from 1 to 2, change
format of `block_comment` and rename `documentation_comment`
/cc @smitbarmase
Change channel reorganization (move up/down) from `cmd-up/down` (mac) /
`ctrl-up/down` (linux) to `alt-up/down` (both) to match moving lines in
the editor.
Also fix an issue where if you selected channels using down/up in the
filter field, the movement shortcuts would not work (`editing` vs
`not_editing`).
Release Notes:
- N/A
Quick follow up to #34896 which ensures that the Agent Panel cannot be
caught by actions like `workspace: toggle left dock` when `disable_ai`
is set to true.
Also removes a method that was introduced but unused in the workspace
because `first_enabled_panel_idx` already covers all cases this method
could be useful for.
Release Notes:
- N/A
This commit adds an example with deep children hierarchy.
The depth of a tree can be tweaked with GPUI_TREE_DEPTH env variable.
With depth=100
<img width="301" height="330" alt="image"
src="https://github.com/user-attachments/assets/844cd285-c5f3-4410-a74e-981bf093ba2e"
/>
With this example, I can trigger a stack overflow at depth=633 (and
higher).
Release Notes:
- N/A
Collect the iterator instead of manually looping over it to utilize
possible size hints. Zed usually passes in owned `Vec`'s, meaning we get
to reuse memory as well.
Release Notes:
- N/A
we were join(",") and split(",") to serialize the patterns.
This doesn't work when pattern includes a ","
example: *.{ts,tsx} (very common pattern used by agent)
help needed:
how will this work on version mismatch?
Release Notes:
- Fixed search filter patterns on remote projects.
https://github.com/user-attachments/assets/d472fbdd-7736-4bd7-8a90-8cca356b2815
This PR adds `editor: diff clipboard with selection` - good for spotting
the differences in eerily-similar code, which is when refactoring code,
as you need to see what needs to be passed in in order to maintain
previous behavior of both snippets.
1. Copy some text from anywhere
2. Highlight some text in Zed
3. Run `editor: diff clipboard with selection`
Like JetBrains' IDEs and VS Code with the `PartialDiff` package, if the
selection is empty, we take the entire buffer as the selection.
Caveats:
- We do not know the language of the text in the clipboard. I went ahead
and just assumed that in most cases, it will be the same language as the
selected text, which does mean we will highlight the old text
incorrectly if they are copying from a different language, but I think
in most cases, it will be the same, and the alternative of always having
no syntax highlighting is worse. PyCharm seems to do the same thing.
Release Notes:
- Added an `editor: diff clipboard with selection` action
---------
Co-authored-by: Junkui Zhang <364772080@qq.com>
Co-authored-by: Ben Kunkle <ben@zed.dev>
Closes#7759
While opening a new SSH project if we are reusing an existing window,
i.e. drop the existing workspace and create a new one, then before
dropping it, we should remove `session_id` from that workspace's
serialized entry. That way:
1. Upon closing (cmd-w) this remote workspace (which also clears
`session_id` for this), and then quitting. No workspace with that
`session_id` is found, and it starts fresh.
2. Upon directly quitting (cmd-q) this remote workspace, only this
workspace exists in db (among two of them) with that `session_id`, and
it restores correctly.
Release Notes:
- Fixed an issue while closing remote workspace restores last local
workspace on startup.
Closes#34924
Now, when `local_paths` are empty, we detach `session_id` from that
workspace serialization item. This way, when we restore it using the
default "last_session", we don't restore this workspace back. This is
same as when we use `cmd-w` to close window, which also sets
`session_id` to `None` before serialization.
Release Notes:
- Fixed an issue where last removed folder from workspace used to reopen
on Zed startup.
The license file is not properly linked to actual license. This was
casued due to new-crate script linking the license to wrong file. Fixed
both of them.
Reference logs:
```
2025-07-22T17:16:19+05:30 ERROR [worktree] error reading target of symlink "/Users/umesh/code/zed/crates/onboarding/LICENSE-GPL": canonicalizing
```
Release Notes:
- N/A
This PR removes the caching of Stripe price IDs by meter ID on the
`StripeBilling` object, as we weren't actually reading them anywhere.
Release Notes:
- N/A
This gets rid of the need to pass context to all cursor functions. In
practice context is always immutable when interacting with cursors.
A nicety of this is in the follow-up PR we will be able to implement
Iterator for all Cursors/filter cursors (hell, we may be able to get rid
of filter cursor altogether, as it is just a custom `filter` impl on
iterator trait).
Release Notes:
- N/A
Closes#26030
*Note: This is my first contribution to Zed*
This addresses a second streaming bottleneck in Bedrock that remained
after the initial fix in #28281 (released in preview 194).
The issue is in the mechanism used to convert Zed's internal `AsyncBody`
into the `SdkBody` expected by the Bedrock language provider. We are
using a non-streaming converter that buffers responses.
**How the fix works:**
The AWS SDK provides streaming-compatible converters to create `SdkBody`
instances, but these require the input body to implement the `Body`
trait from the `http-body` crate.
This PR enables streaming by implementing the required trait and
switching to the streaming-compatible converter.
**Changes (2 commits):**
* 1st Commit - **Implement http-body Body trait for AsyncBody:**
- Add `http-body = 1.0` dependency (already an indirect dependency)
- Implement the `Body` trait for our existing `AsyncBody` type
- Uses `poll_frame` to read data chunks asynchronously, preserving
streaming behavior
* 2nd Commit - **Use streaming-compatible AWS SDK converter:**
- Create `SdkBody` using `SdkBody::from_body_1_x()` with the new `Body`
trait implementation
**Details/FAQ:**
**Q: Why add another dependency?**
A: We tried to avoid adding a dependency, but the AWS SDK requires the
`Body` trait and `http-body` is where it's defined. The crate is already
an indirect dependency, making this a reasonable solution.
**Q: Why modify the shared `http_client` crate instead of just
`aws_bedrock_client`?**
A: We considered implementing the `Body` trait on a wrapper in
`aws_bedrock_client`, but since `AsyncBody` already uses `http` crate
types, extending support to the companion `http-body` crate seems
reasonable and may benefit other integrations.
**Q: How was this bottleneck discovered?**
A: After @5herlocked's initial streaming fix in #28281, I tested preview
194 and noticed streaming still had issues. I found a way to reproduce
the problem and chatted with @5herlocked about it. He immediately
pinpointed the exact location where the issue was occurring, his
diagnosis made this fix possible.
**Q: How does this relate to the previous fix?**
A: #28281 fixed buffering issues higher in the stack, but unfortunately
there was another bottleneck lower-down in the aws-http-client. This PR
addresses that separate buffering issue.
**Q: Does this use zero-copy or one-copy?**
A: The `Body` implementation includes one copy. Someone more
knowledgeable might be able to achieve a zero-copy approach, but we
opted for a conservative approach. The performance impact should not be
perceptible in typical usage.
**Testing:**
Confirmed that Bedrock streaming now works without buffering delays in a
local build.
Release Notes:
- Improved Bedrock streaming by eliminating response buffering delays
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Closes#31917
Previously, as of #28457 we used a hack, creating an empty transaction
in the history that we then merged formatting changes into in order to
correctly identify concurrent edits to the buffer while formatting was
happening. This caused issues with noop formatting however, as using the
normal API of the buffer history (in an albeit weird way) resulted in
the redo stack being cleared, regardless of whether the formatting
transaction included edits or not, which is the correct behavior in all
other contexts.
This PR fixes the redo issue by codifying the behavior formatting wants,
that being the ability to push an empty transaction to the history with
no other side-effects (i.e. clearing the redo stack) to detect
concurrent edits, with the tradeoff being that it must then manually
remove the transaction later if no changes occurred from the formatting.
The redo stack is still cleared when there are formatting edits, as the
individual format steps use the normal `{start,end}_transaction` methods
which clear the redo stack if the finished transaction isn't empty.
Release Notes:
- Fixed an issue where redo would not work after buffer formatting
(including formatting on save) when the formatting did not result in any
changes
