This is another in the series of PRs to make the GitStore own all
repository state and enable better concurrency control for git
repository scans.
After this PR, the `RepositoryEntry`s stored in worktree snapshots are
used only as a staging ground for local GitStores to pull from after
git-related events; non-local worktrees don't store them at all,
although this is not reflected in the types. GitTraversal and other
places that need information about repositories get it from the
GitStore. The GitStore also takes over handling of the new
UpdateRepository and RemoveRepository messages. However, repositories
are still discovered and scanned on a per-worktree basis, and we're
still identifying them by the (worktree-specific) project entry ID of
their working directory.
- [x] Remove WorkDirectory from RepositoryEntry
- [x] Remove worktree IDs from repository-related RPC messages
- [x] Handle UpdateRepository and RemoveRepository RPCs from the
GitStore
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR fixes a bug where breakpoints would be rendered on incorrect
lines when openings a git hunk that contained breakpoints. This also
disables breakpoints from being shown in deleted git hunks as well.
Note: There's some unexpected behavior when using an anchor to get a
display point that is in an open git hunk, where the
`anchor.to_point().col == 0`.
```rust
let position = multi_buffer_anchor
.to_point(&multi_buffer_snapshot)
.to_display_point(&snapshot);
```
The above code will return a display point that is one line below where
the anchor actually represents when it's in an opened hunk diff. Which
causes the bug shown below
https://github.com/user-attachments/assets/bd15d02a-3cdc-4c8e-841f-bef238583351
@ConradIrwin Is this expected behavior when calling
`.to_display_point(&snapshot)`?
Release Notes:
- N/A
Closes#4461
Take 2 on https://github.com/zed-industries/zed/pull/25040.
Fixes panic caused due to using `setHiddenUntilMouseMoves` return type
to `set` cursor on macOS.
Release Notes:
- Now cursor hides when the user is typing in editor. It will stay
hidden until it is moved again. This behavior is `true` by default, and
can be configured with `hide_mouse_while_typing` in settings.
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
Co-authored-by: Thomas Mickley-Doyle <thomas@zed.dev>
Co-authored-by: Agus <agus@zed.dev>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Co-authored-by: Angelk90 <angelo.k90@hotmail.it>
This PR adds the ability to enable/disable breakpoints. It also fixes a
bug where toggling a log breakpoint from the breakpoint context menu
would add a standard breakpoint on top of the log breakpoint instead of
deleting it.
todo:
- [x] Add `BreakpointState` field Breakpoint that manages if a
breakpoint is active or not
- [x] Don't send disabled breakpoints to DAP servers - in progress
- [x] Half the opacity of disabled breakpoints - in progress
- [x] Add `BreakpointState` to database
- [x] Editor test for enabling/disabling breakpoints
- [ ] Integration Test to make sure we don't send disabled breakpoints
to DAP servers
- [x] Database test to make sure we properly serialize/deserialize
BreakpointState
Release Notes:
- N/A
---------
Co-authored-by: Piotr <piotr@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
This PR fixes an issue where a clickable scrollbar track was inserted in
the editor even when scrollbars were explicitly disabled via the user's
settings. If the user has
```json
"scrollbar": {
"show": "never"
}
```
in their settings, invisible and interactable scrollbar tracks will be
inserted in the editor if scrollbars would be required, as seen below:
https://github.com/user-attachments/assets/b0d915a9-7a7e-4518-84d8-96d9b15aab12
The bug occurs because we only set the scrollbar contents to be
invisible, which however does not affect the insertion of hitboxes for
the scrollbars.
This PR fixes this behaviour by preventing any scrollbar layouting from
happening when scrollbars are explicitly disabled via the settings:
https://github.com/user-attachments/assets/a3f5725b-aead-4fec-9fd8-e574cf269d45
All existing panels which have configurable scrollbars behave the same
way, see
fb2586a553/crates/outline_panel/src/outline_panel.rs (L4362-L4373)
for example. Following this check, neither a thumb nor a track is
inserted in any case when scrollbars are never to be shown.
Release Notes:
- Fixed invisible scrollbar tracks being inserted into the editor when
scrollbars are explicitly disabled via settings.
This PR is primarily an implementation of @osiewicz
[comment](https://github.com/zed-industries/zed/pull/19495#pullrequestreview-2488877957)
in an effort to increase maintainability after the horizontal editor
scrollbar was added in #19495 . I also want to build on these changes in
future PRs to adress some other small bugs.
This primarily does the following:
1. Uses `along` wherever possible
2. Fixes the amount of mouse event listeners attached to the editor when
scrollbars are displayed to 2 instead of 2-4 in case both scrollbars are
displayed.
This can be done since only one scrollbar can be dragged by the cursor
at any given time, so the event listeners now account for that. The
state reflecting the scrollbar dragging state was also updated
accordingly.
It does not change any functionality besides the aforementioned event
listener code as well as some minor bugs which where present after
#19495 , namely:
- One missing `cx.stop_propagation()` (see
[here](a8741dc310/crates/editor/src/element.rs (L4684))
and
[here](a8741dc310/crates/editor/src/element.rs (L4838))
respectively).
- The horizontal scrollbar thumb having a small border on the left side,
which seems to be unintended for the horizontal scrollbar whilst
intended for the vertical one. Since this is a minimal change, I figured
it could be already included in this PR.
This PR admittetly grew quite large over time, however, much of the diff
is just renames to account for the code now working for both axes as
well as moved code. The logic remains (or should at least be)
unaffected. If I should split this into two PRs or remove some of the
changes, please let me know.
Release Notes:
- N/A
It doesn't make sense to have `Pixels: Mul<Pixels, Output = Pixels>` as
the output should be `Pixels^2` (area), so these impls are removed. All
code where these impls were used are improved by instead multiplying by
`f32` or `usize`.
Also adds math op impls that are present for `Pixels` but absent for
`ScaledPixels`. Adds missing `Mul<Pixels> for usize` to both.
Release Notes:
- N/A
Features:
* Scales dash spacing with border width.
* Laying out dashes around rounded corners.
* Varying border widths with rounded corners - now uses an ellipse for the inner edge of the border.
* When there are no rounded corners, each straight border is laid out separately, so that the dashes to meet at the corners.
* All sides of each dash are antialiased.
Release Notes:
- N/A
---------
Co-authored-by: Michael Sloan <michael@zed.dev>
Co-authored-by: Ben <ben@zed.dev>
This PR updates two existing settings to use the settings migrator
instead of a manually implemented visitor. Both of these settings were
changed prior to the introduction of automatic migrations and the
visitor ensured that the settings were kept backwards compatible. See
https://github.com/zed-industries/zed/pull/22200 and
https://github.com/zed-industries/zed/pull/22364 respectively.
WIth this change, existing user configurations are updated accordingly
and the corresponding settings can derive `Deserialize` again.
I also added tests for the replacement of settings values, as there was
no test for this behaviour. Additionally, I added a seperate test for
the existing migration of `always_show_close_button`, since that
migration updated both the key and value.
Release Notes:
- N/A
- **support alternate tag name node names to fix autoclosing of
`<Foo.Bar>` style tags in TSX**
- **remove checks against close tag name while checking if tag is
closed**
- **move jsx tag auto close tests into jsx_tag_auto_close.rs**
Closes#27335
Release Notes:
- Fixed an issue with JSX tag auto-close where components containing a
`.` access like `<Foo.Bar>` would be auto-closed as `</>` instead of
`</Foo.Bar>`
When the selection grows both ways, the new code prioritizes the top
part instead of bottom one, this is usually more helpful considering
that most programming language grammars tend to define tokens right
before large delimited blocks, and rarely after (because humans and
parsers read from top to bottom).
Also, revert selection when convenient, so you have more control over
what you're selecting, looking at the selection `head` is commonly more
convenient than at the `tail`.
Release Notes:
- Improve scrolling of `editor::SelectLargerSyntaxNode` for better
visibility.
Closes#22398
Release Notes:
- vim: Adds `'` and `"` marks (last location jumped from in the current
buffer, and location when last exiting a buffer)
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR fixes the new awkward-looking git status labels due to the
change in version control colors. We want to enable styling version
control colors distinctly from other statuses, but these colors aren't
great for labels as they are meant to be quite high contrast.
We may need to split version control colors into a primary color and a
text color if we want to improve theming this overall.
| Before | After |
|--------|-------|
| 
| 
|
Release Notes:
- Fixes a regression in git status colors in the project panel
This fixes a bug where breakpoint's were unable to be toggled if the
text::Anchor representing the breakpoint position was not at the
beginning of a line.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
This is a pure refactoring PR that goes through all the git-related APIs
exposed by the worktree crate and minimizes their use outside that
crate, migrating callers of those APIs to read from the GitStore
instead. This is to prepare for evacuating git repository state from
worktrees and making the GitStore the new source of truth.
Other drive-by changes:
- `project::git` is now `project::git_store`, for consistency with the
other project stores
- the project panel's test module has been split into its own file
Release Notes:
- N/A
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
No default binding currently, `cmd/ctr-shift-c` seem somewhat natural
but those are occupied by the collab panel.
https://github.com/user-attachments/assets/702cc52a-a4b7-4f2c-bb7f-12ca0c66faeb
Release Notes:
- Added a way to copy with the selections trimmed
---------
Co-authored-by: Cole Miller <m@cole-miller.net>
Closes#24794
We now don't filter matches provided by the fuzzy matcher, as it already
performs most of the filtering for us. Instead, the custom logic we
previously used for filtering is now used to partition, where before
discarded matches will be appended at end of list.
Before - Filtering out matches with higher fuzzy score
<img width="400" alt="image"
src="https://github.com/user-attachments/assets/7f9d66a2-0921-499c-af8a-f1e530da50b1"
/>
After - Changing filter to partition instead, and appending remaining
items at the end
<img width="400" alt="image"
src="https://github.com/user-attachments/assets/45848f70-ed51-4935-976c-6c16c5b5777b"
/>
Release Notes:
- Improved LSP auto complete to show more possible matches.
---------
Co-authored-by: Peter Tripp <petertripp@gmail.com>
Closes#18581
Now characters for completing query and word characters, which are
responsible for selecting words by double clicking or navigating, are
different. This fixes a bunch of things:
For settings.json, this improves completions to treat the whole string
as a completion query, instead of just the last word. We now added
"space" as a completion query character without it being a word
character.
For keymap.json, this improves selecting part of an action as the ":"
character is only a completion character and not a word character. So,
completions would still trigger on ":" and query capture will treat ":"
as a word, but for actions like selections and navigation, ":" will be
treated as punctuation.
Before:
Unnecessary related suggestions as query is only the last word which is
"d".
<img width="300" alt="image"
src="https://github.com/user-attachments/assets/8199a715-7521-49dd-948b-e6aaed04c488"
/>
Double clicking `ToggleFold` selects the whole action:
<img width="300" alt="image"
src="https://github.com/user-attachments/assets/c7f91a6b-06d5-45b6-9d59-61a1b2deda71"
/>
After:
Now query is "one d" and it shows only matched ones.
<img width="300" alt="image"
src="https://github.com/user-attachments/assets/1455dfbc-9906-42e8-b8aa-b3f551194ca2"
/>
Double clicking `ToggleFold` only selects part of the action, which is
more refined behavior.
<img width="300" alt="image"
src="https://github.com/user-attachments/assets/34b1c3c2-184f-402f-9dc8-73030a8c370f"
/>
Release Notes:
- Improved autocomplete suggestions in `settings.json`, now whole string
is queried instead of just last word of string, which filters out lot of
false positives.
- Improved selection of action in `keymap.json`, where now you can
double click to only select certain part of action, instead of selecting
whole action.
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Ben Kunkle <ben@zed.dev>
Closes#26847
Release Notes:
- Updated Git panel background to use panel_background instead of
ElevationIndex::Surface.bg(cx) for consistency with other panels.
- Removed redundant GitStatusColors struct from status.rs and refactored
to use existing theme colors.
- Adjusted Color enum mappings in color.rs to reference
version_control_* colors instead of status() for better alignment with
the theme system.
- Cleaned up unused or redundant code.
Closes #ISSUE
cc @Anthony-Eid. One thing I noticed while doing this is that we do an
invalid cast here from DisplayPoint.row to MultiBufferRow. These are not
the same if you have soft-wrap enabled (or anything else in the display
map that's not in the editor).
Release Notes:
- N/A
This is the core change:
https://github.com/zed-industries/zed/pull/26758/files#diff-044302c0d57147af17e68a0009fee3e8dcdfb4f32c27a915e70cfa80e987f765R1052
TODO:
- [x] Use AsyncFn instead of Fn() -> Future in GPUI spawn methods
- [x] Implement it in the whole app
- [x] Implement it in the debugger
- [x] Glance at the RPC crate, and see if those box future methods can
be switched over. Answer: It can't directly, as you can't make an
AsyncFn* into a trait object. There's ways around that, but they're all
more complex than just keeping the code as is.
- [ ] Fix platform specific code
Release Notes:
- N/A
Release Notes:
- Fixed involuntary joining of lines when typing in the commit message
editor
- Fixed being unable to type whitespace after a comment character at the
start of a line in the commit message editor
### DISCLAIMER
> As of 6th March 2025, debugger is still in development. We plan to
merge it behind a staff-only feature flag for staff use only, followed
by non-public release and then finally a public one (akin to how Git
panel release was handled). This is done to ensure the best experience
when it gets released.
### END OF DISCLAIMER
**The current state of the debugger implementation:**
https://github.com/user-attachments/assets/c4deff07-80dd-4dc6-ad2e-0c252a478fe9https://github.com/user-attachments/assets/e1ed2345-b750-4bb6-9c97-50961b76904f
----
All the todo's are in the following channel, so it's easier to work on
this together:
https://zed.dev/channel/zed-debugger-11370
If you are on Linux, you can use the following command to join the
channel:
```cli
zed https://zed.dev/channel/zed-debugger-11370
```
## Current Features
- Collab
- Breakpoints
- Sync when you (re)join a project
- Sync when you add/remove a breakpoint
- Sync active debug line
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Restart stack frame (if adapter supports this)
- Variables
- Loaded sources
- Modules
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Debug console
- Breakpoints
- Log breakpoints
- line breakpoints
- Persistent between zed sessions (configurable)
- Multi buffer support
- Toggle disable/enable all breakpoints
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Show collapsed stack frames
- Restart stack frame (if adapter supports this)
- Loaded sources
- View all used loaded sources if supported by adapter.
- Modules
- View all used modules (if adapter supports this)
- Variables
- Copy value
- Copy name
- Copy memory reference
- Set value (if adapter supports this)
- keyboard navigation
- Debug Console
- See logs
- View output that was sent from debug adapter
- Output grouping
- Evaluate code
- Updates the variable list
- Auto completion
- If not supported by adapter, we will show auto-completion for existing
variables
- Debug Terminal
- Run custom commands and change env values right inside your Zed
terminal
- Attach to process (if adapter supports this)
- Process picker
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Disconnect
- Restart
- Stop
- Warning when a debug session exited without hitting any breakpoint
- Debug view to see Adapter/RPC log messages
- Testing
- Fake debug adapter
- Fake requests & events
---
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
Co-authored-by: Piotr <piotr@zed.dev>
Makes multibuffer headers less close to the top of the file.
Moves multibuffer line numbers one em to the right to make space for the
expand excerpt button on large line numbers.
Release Notes:
- N/A
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Closes#25458
When navigating code from a preview tab with
`enable_preview_from_code_navigation` set to `true`, "Go Back" from a
newly opened tab could focus on the tab to the right instead of
returning to the original preview tab.
Before, we killed the existing preview tab before opening a new one,
which breaking history as the new tab had no reference to the old one.
This caused navigation to shift to the next tab on the right.
Now, we first add the new tab at the preview index, and then kill the
existing preview tab. This preserves the history by linking new preview
tab to existing tab.
Release Notes:
- Fixes an issue where navigating code from a preview tab with
`enable_preview_from_code_navigation` set to `true`, "Go Back" from a
newly opened tab could focus on the tab to the right instead of
returning to the original preview tab.
