- https://github.com/zed-industries/zed/pull/30444
This PR broke migration notification to only emit event when content is
migrated. This resulted in the migration banner not going away after
clicking "Backup and Migrate". It should also emit event when it's not
migrated which removes the banner.
Future: I think we should have better tests in place for banner
visibility.
Release Notes:
- Fixed an issue where migration banner wouldn't go away after clicking
"Backup and Migrate".
This PR moves over the last method on `StripeBilling` to use the
`StripeClient` trait, allowing us to fully mock out Stripe behaviors for
`StripeBilling` in tests.
Release Notes:
- N/A
Follow-up to #31712
Pane handle hitboxes were opaque prior to the linked PR. This was the
case because pane handles have an intentionally larger hitbox than the
pane dividers size to allow for easier dragging. The cursor style is
also updated for that hitbox to indicate that resizing is possible:
9086784038/crates/workspace/src/pane_group.rs (L1297-L1301)
Not blocking the mouse events here causes mouse events to bleed through
this hitbox whilst actually any clicks will only cause a pane resize to
happen. Hence, this hitbox should continue to block mouse events to
avoid any confusion when resizing panes.
I considered using `HitboxBehavior::BlockMouseExceptScroll` here,
however, due to the reasons mentioned above, I decided against it. The
cursor will not indicate that scrolling should be possible. Since all
other mouse events on underlying elements (like hovers) are blocked, it
felt more reasonable to just go with `HitboxBehavior::BlockMouse`.
Release Notes:
- N/A
This method was added in #20649 to be an alternative of `occlude` which
allows scroll events. It seems a bit arbitrary to only stop left mouse
downs, so this seems like it's probably an improvement.
Release Notes:
- N/A
tl;dr: This adds `.block_mouse_except_scroll()` which should typically
be used instead of `.occlude()` for cases when the mouse shouldn't
interact with elements drawn below an element. The rationale for
treating scroll events differently:
* Mouse move / click / styles / tooltips are for elements the user is
interacting with directly.
* Mouse scroll events are about finding the current outer scroll
container.
Most use of `occlude` should probably be switched to this, but I figured
I'd derisk this change by minimizing behavior changes to just the 3 uses
of `block_mouse_except_scroll`.
GPUI changes:
* Added `InteractiveElement::block_mouse_except_scroll()`, and removes
`stop_mouse_events_except_scroll()`
* Added `Hitbox::should_handle_scroll()` to be used when handling scroll
wheel events.
* `Window::insert_hitbox` now takes `HitboxBehavior` instead of
`occlude: bool`.
- `false` for that bool is now `HitboxBehavior::Normal`.
- `true` for that bool is now `HitboxBehavior::BlockMouse`.
- The new mode is `HitboxBehavior::BlockMouseExceptScroll`.
* Removes `Default` impl for `HitboxId` since applications should not
manually create `HitboxId(0)`.
Release Notes:
- N/A
Parses project's package.json to better detect Jasmine, Jest, Vitest and
Mocha and `test`, `build` scripts presence.
Also tries to detect `pnpm` and `npx` as test runners, falls back to
`npm`.
https://github.com/user-attachments/assets/112d3d8b-8daa-4ba5-8cb5-2f483036bd98
Release Notes:
- Improved TypeScript task detection
This PR adds a new `intent` field to completion requests to assist in
categorizing them correctly.
Release Notes:
- N/A
---------
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
To use this, spawn `weclome: toggle base keymap selector` from the
command palette.
<img width="589" alt="Screenshot 2025-05-29 at 14 07 35"
src="https://github.com/user-attachments/assets/0d4c4eff-6a3b-40f4-9032-5d8ca7664d20"
/>
MacOS is well tested to match Cursor. The [curors keymap
documentation](https://docs.cursor.com/kbd) is does not explicitly state
windows/linux keymap entries only "All Cmd keys can be replaced with
Ctrl on Windows." so that is what we've done. We welcome feedback /
refinements.
Note, because this provides a mapping for `cmd-k` (macos) and `ctrl-k`
(linux/windows) using this keymap will disable all of the default
chorded keymap entries which have `cmd-k` / `ctrl-k` as a prefix. For
example `cmd-k cmd-s` for open keymap will no longer function.
Release Notes:
- Added Cursor compatibility keymap
---------
Co-authored-by: Joseph Lyons <joseph@zed.dev>
Re-enables format on save for agent changes (when the user has that
enabled in settings), except differently from before:
- Now we do the format-on-save in the separate buffer the edit tool
uses, *before* the diff
- This means it never triggers separate staleness
- It has the downside that edits are now blocked on the formatter
completing, but that's true of saving in general.
Release Notes:
- N/A
---------
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Was touching this part of the Agent Panel and thought it could be a
quick name consistency win here, so it is aligned with the terminology
we're currently actively using in the product/docs.
Release Notes:
- N/A
Follow up to https://github.com/zed-industries/zed/pull/31470.
I started looking at config and changed preferred_completion_mode to
burn to only find its max so made changes to align it better with
rebrand. As this is in preview build now.
This doesn't touch zed_llm_client. Only the Zed changes the code and doc
to match the new UI of burn mode. There are still more things to be
renamed, though.
Release Notes:
- N/A
---------
Signed-off-by: Umesh Yadav <git@umesh.dev>
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Turning minimap on during debug sessions would cause the console editor
to gain the minimap, despite it being explicitly disabled in the code.
Release Notes:
- N/A
This is my first contribution to zed, let me know if I missed anything.
There is no corresponding issue/discussion.
`$ZED_RELATIVE_DIR` can be used in cases where a task's command's
filesystem namespace (e.g. inside a container) is different than the
host, where absolute paths cannot work.
I modified `relative_path` to `relative_file` after the addition of
`relative_dir`.
For top-level files, where `relative_file.parent() == Some("")`, I use
`"."` for `$ZED_RELATIVE_DIR`, which is a valid relative path in both
*nix and windows.
Thank you for building zed, and open-sourcing it. I hope to contribute
more as I use it as my primary editor.
Release Notes:
- Added ZED_RELATIVE_DIR (path to current file's directory relative to
worktree root) task variable.
That commit broke a lot, as our one-off tasks (alt-enter in the tasks
modal), npm, jest tasks are all not real commands, but a composition of
commands and arguments.
This reverts commit 5db14d315b.
Closes https://github.com/zed-industries/zed/issues/31554
Release Notes:
- N/A
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Currently, `RemoteEntry::SshConfig` for `ssh_config_servers` initializes
on every render. This leads to side effects like a new focus handle
being created on every render, which leads to breaking navigating
up/down for `ssh_config_servers` items.
This PR fixes it by moving the logic of remote entry
for`ssh_config_servers` into `default_mode`, and only rebuilding it when
`ssh_config_servers` actually changes.
Before:
https://github.com/user-attachments/assets/8c7187d3-16b5-4f96-aa73-fe4f8227b7d0
After:
https://github.com/user-attachments/assets/21588628-8b1c-43fb-bcb8-0b93c70a1e2b
Release Notes:
- Fixed issue navigating SSH config servers in Remote Projects with
keyboard.
Release Notes:
- Debugger Beta: Added a spinner to the debug panel when a session is
starting up.
---------
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Co-authored-by: Julia <julia@zed.dev>
Add `(child)` instead of using the same label.
Release Notes:
- Debugger Beta: Made child sessions appear distinct from their parents
in the session selector.
This PR updates the `StripeBilling::checkout_with_zed_pro` and
`StripeBilling::checkout_with_zed_pro_trial` methods to use the
`StripeClient` trait instead of using `stripe::Client` directly.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/31565
* Looking up settings on every row was very slow in the case of large
folds, especially if there was an `.editorconfig` file with numerous
glob patterns
* Checking whether each indent guide was within a fold was very slow,
when a fold spanned many indent guides.
Release Notes:
- Fixed slowness that could happen when editing in the presence of large
folds.
One caveat with this PR is that the keybinding still doesn't work for text threads. Will do that in a follow-up.
Release Notes:
- agent: Added a keybinding to toggle Burn Mode on and off.
Follow-up to #24887
Follow-up to #31510
This PR ensures that [this misalignment of the horizontal
scrollbar](https://github.com/zed-industries/zed/pull/31510#issuecomment-2912842457)
does not occur. See the entire discussion in the first linked PR as to
why this gap is there in the first place.
I am also aware of the general stance towards comments. Yet, I felt for
this case it is better to just straight up explain how these two things
are connected, as I do believe this is not intuitively clear after all.
Might also be a good time to bring
https://github.com/zed-industries/zed/issues/25519 up again. The
horizontal scrollbar seems huge for the edit file tool card.
Furthermore, since we do not reserve space for the horizontal scrollbar
(yet), this will lead to the last line being not clickable.
Release Notes:
- N/A
This PR updates `StripeBilling` to use the `StripeClient` trait to
retrieve prices and meters from Stripe instead of using the
`stripe::Client` directly.
Release Notes:
- N/A
The fix prevents data loss, but it also results in a somewhat confusing
UX. Specifically, after the user has made changes to an AI-created file,
selecting "Reject" will leave AI changes in place.
This is because there's no trivial way to disentangle user edits from
the edits made by the AI.
A better solution might exist. In the meantime, this change should do.
Closes
* #30527
Release Notes:
- Prevent data loss when reverting changes in an agent-created file
This PR introduces a new `StripeClient` trait to abstract over
interacting with the Stripe API.
This will allow us to more easily test our billing code.
This initial cut is small and focuses just on making
`StripeBilling::find_or_create_customer_by_email` testable. I'll follow
up with using the `StripeClient` in more places.
Release Notes:
- N/A
Previously, the click on the backdrop to dismiss the message editing was
unreliable. You would click on it and sometimes it would work and others
it wouldn't. This PR fixes that now.
Release Notes:
- agent: Fixes the previous message dismissal by clicking on the
backdrop
Previously, when you clicked on a previous message to edit it and then
dismissed it, your focus would jump to the buffer. This caught me
several times as the most obvious place to return to for me was the
agent panel main message editor, so I can continue prompting something
else. And this is what this PR changes.
Release Notes:
- agent: Improved previous message editing UX by returning focus to the
main panel's text area after dismissing it.
This expands our deserialization of JSON from models to be more tolerant
of different variations that the model may send, including
capitalization, wrapping things in objects vs. being plain strings, etc.
Also when deserialization fails, it reports the entire error in the JSON
so we can see what failed to deserialize. (Previously these errors were
very unhelpful at diagnosing the problem.)
Finally, also removes the `WrappedText` variant since the custom
deserializer just turns that style of JSON into a normal `Text` variant.
Release Notes:
- N/A
Follow up to #31179
In addition to seeing the version when in the `Click to restart and
update Zed` status, this PR allows us to see the version when in
`Downloading Zed update…` or `Installing Zed update…` status, in a
tooltip, when hovering on the activity indicator.
Will merge after tomorrow's release.
Release Notes:
- Added version information, in a tooltip, when hovering on the activity
indicator for both the download and install status.
This PR simply does a tiny bit of cleanup on some code, where I wasn't
quite happy with the naming and ordering of parameters of the now
`check_if_fetched_version_is_newer` function. There should be no
functional changes here, but I will wait until after tomorrow's release
to merge.
Release Notes:
- N/A
* stopped fetching LSP tasks for too long (but still use the hardcoded
value for the time being — the LSP tasks settings part is a simple bool
key and it's not very simple to fit in another value there)
* introduced `prefer_lsp` language task settings value, to control
whether in the gutter/modal/both/none LSP tasks are shown exclusively,
if possible
Release Notes:
- Added a way to prefer LSP tasks over Zed tasks
