Closes https://github.com/zed-industries/zed/issues/29746
| Action | New Key | Old Key | Former Conflict |
| - | - | - | - |
| `edit_prediction::ToggleMenu` | `ctrl-alt-shift-i` | `ctrl-shift-i` |
`editor::Format` |
| `editor::ToggleEditPrediction` | `ctrl-alt-shift-e` | `ctrl-shift-e` |
`project_panel::ToggleFocus` |
These aren't great keys and I'm open to alternate suggestions, but the
will work out of the box without conflict.
Release Notes:
- N/A
Small fixes to onboarding.
Correct ligature example.
Replace`ctrl-escape` and `alt-tab` since they are reserved on windows
(and often on linux) and so are caught by the OS.
Release Notes:
- N/A
Closes #ISSUE
Allows tabbing through everything in all three pages. Until #35075 is
merged it is not possible to actually "click" tab focused buttons with
the keyboard.
Additionally adds an action `onboarding::Finish` and displays the
keybind. The action corresponds to both the "Skip all" and "Start
Building" buttons, with the keybind displayed similar to how it is for
the page nav buttons
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: MrSubidubi <finn@zed.dev>
"Settings" is the terminology we use in the agent panel, thus having the
action use "configuration" makes it harder for folks to find this either
via the command palette or the keybinding editor UI in case they'd like
to change it.
Release Notes:
- agent: Renamed the "open configuration" action to "open settings" for
better discoverability and consistency
Follow-up to #26114
- Ensure that the previous commit message is filled in when toggling on
amend mode from the context menu
- Fix keybinding flicker in context menu
Release Notes:
- N/A
This change dims rows in the keymap editor for which the corresponding
keybind is overridden by other keybinds coming from higher priority
sources.
Release Notes:
- N/A
Change channel reorganization (move up/down) from `cmd-up/down` (mac) /
`ctrl-up/down` (linux) to `alt-up/down` (both) to match moving lines in
the editor.
Also fix an issue where if you selected channels using down/up in the
filter field, the movement shortcuts would not work (`editing` vs
`not_editing`).
Release Notes:
- N/A
Make the git blame popover available via the keymap by making it an
action. The blame popover stays open after being shown via the action,
similar to the `editor::Hover` action.
I added a default vim-mode key binding for `g b`, which goes in hand
with `g h` for hover. I'm not sure what the keybind would be for regular
layouts, if any would be set by default.
I'm opening this as a draft because I coludn't figure out a way to
position the popover correctly above/under the cursor head. I saw some
uses of `content_origin` in other places for calculating absolute pixel
positions, but I'm not sure how to make use of it here without doing a
big refactor of the blame popover code 🤔. I would appreciate some
help/tips with positioning, because it seems like the last thing to
implement here.
Opening as a draft for now because I think without the correct
positioning this feature is not complete.
Closes https://github.com/zed-industries/zed/discussions/26447
Release Notes:
- Added `editor::BlameHover` action for showing the git blame popover
under the cursor. By default bound to `ctrl-k ctrl-b` and to `g h` in
vim mode.
Closes: https://github.com/zed-industries/zed/issues/34780
Also relocated undo/redo selection in the keymap (no-op) as they are
from Sublime, not VSCode.
Release Notes:
- vim: Fixed an issue so `ctrl-w` / `ctrl-h` and `ctrl-u` work in
pickers on Linux when Vim mode is enabled.
When `use_modifier_to_send` is turned on, holding `cmd`/`ctrl` is
necessary to send a message in the agent panel. Text threads already use
`cmd-enter` by default to submit a message, and it was done this way to
have the usual text editing bindings not taken over when writing a
prompt, sort of stimulating more thoughtful writing. While `enter` to
send is still somewhat a huge pattern in chat-like LLM UIs, it still
makes sense to allow this for the new agent panel... hence the existence
of this setting now!
Release Notes:
- agent: Added the `use_modifier_to_send` setting, which makes holding a
modifier (`cmd`/`ctrl`), together with `enter`, required to send a new
message.
This is following feedback from folks that were searching the "close
others" action, available in the tab's context menu, and not finding it
because it was actually named "close inactive", which was confusing. So,
this PR makes sure the tab's menu item and the action have consistent
naming.
Release Notes:
- Rename "CloseInactiveItems" action to "CloseOtherItems" for naming
consistency.
Closes #ISSUE
Defines keybindings for `keymap_editor::EditBinding` and
`keymap_editor::CreateBinding`, making sure those actions are used in
tooltips.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: Finn <dev@bahn.sh>
Adds keyboard navigation to the keybind edit modal. Using up/down arrows
to select the previous/next input editor, and `cmd-enter` to save +
`escape` to exit
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes #ISSUE
Changes direction on the design of the keystroke input. Due to MacOS
limitations, it was decided that the complex repeat keystroke logic
could be avoided by limiting the number of keystrokes so that accidental
repeats were less damaging to ux. This PR follows up on the design pass
in #34437 that assumed these changes would be made, hooking up actions
and greatly improving the keyboard navigability of the keystroke input.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
This PR adds a `severity` argument so severity can be defined when
navigating through diagnostics. This allows keybinds like the following:
```json
{
"] e": ["editor::GoToDiagnostic", { "severity": "error" }],
"[ e": ["editor::GoToDiagnostic", { "severity": "error" }]
}
```
I've added test comments and a test. Let me know if there's anything
else you need!
Release Notes:
- Add `severity` argument to `editor::GoToDiagnostic`,
`editor::GoToPreviousDiagnostic`, `project_panel::SelectNextDiagnostic`
and `project_panel::SelectPrevDiagnostic` actions
This fixes a bug on linux where repeated presses of p while holding down
the ctrl modifier navigates through options in reverse.
Closes#34379
The main issue is the default biding of ctrl-p on linux is
menu::SelectPrevious hence in context "context": "FileFinder ||
(FileFinder > Picker > Editor)" it would navigate in reverse
Release Notes:
- Fixed `file_finder::Toggle` on Linux not scrolling forward
* Add a "close item"-like binding to close the active dock, if present
Now, cmd/ctrl-w can be used close the focused dock before the Zed window
* Add defaults to MoveItem* actions to make it appear in the command
palette
Release Notes:
- N/A
This PR revives zed-industries/zed#27818 and aims to complete the
partially implemented overloaded signature help feature.
The first commit is a rebase of zed-industries/zed#27818, and the
subsequent commit addresses all review feedback from the original PR.
Now the overloaded signature help works like
https://github.com/user-attachments/assets/e253c9a0-e3a5-4bfe-8003-eb75de41f672Closes#21493
Release Notes:
- Implemented signature help for overloaded items. Additionally, added a
support for rendering signature help documentation.
---------
Co-authored-by: Fernando Tagawa <tagawafernando@gmail.com>
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
First time contributor here. 😊
I settled on markdown::MovePageUp and markdown::MovePageDown to match
the names the editor uses for the same functionality.
Closes#30246
Release Notes:
- Support PgUp/PgDown in Markdown previews
We reworked the debug modal spawning to use the task context from past
debug sessions when spawning a debug scenario based on task inventory
history.
We changed restart session keybinding to rerun session too.
Closes#31369
Release Notes:
- Restarting a debug session now reruns build tasks that are associated
with the session
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Adds the initial semblance of a keymap UI. It is currently gated behind the `settings-ui` feature flag. Follow up PRs will add polish and missing features.
Release Notes:
- N/A
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
Co-authored-by: Anthony <anthony@zed.dev>
Closes#10454
Implements SVG file preview capability similar to the existing markdown
preview.
- Adds `svg_preview` crate with preview view and live reloading upon
file save.
- Integrates SVG preview button in quick action bar.
- File preview shortcuts (`ctrl/cmd+k v` and `ctrl/cmd+shift+v`) are
extension-aware.
Release Notes:
- Added SVG file preview, accessible via the quick action bar button or
keyboard shortcuts (`ctrl/cmd+k v` and `ctrl/cmd+shift+v`) when editing
SVG files.
Follow up to https://github.com/zed-industries/zed/pull/31777. I
could've sworn the filter options keybinding was being displayed in the
icon button tooltip, but just realized it actually wasn't. So, this PR
fixes that!
Release Notes:
- N/A
### This PR introduces support for adding watchers to specific
expressions (such as variable names or evaluated expressions).
This feature is useful in scenarios where many variables are in scope,
but only a few are of interest—especially when tracking variables that
change frequently. By allowing users to add watchers, it becomes easier
to monitor the values of selected expressions across stack frames
without having to sift through a large list of variables.
https://github.com/user-attachments/assets/c49b470a-d912-4182-8419-7406ba4c8f1e
------
**TODO**:
- [x] make render variable code reusable for render watch method
- [x] use SharedString for watches because of a lot of cloning
- [x] add tests
- [x] basic test
- [x] test step debugging
Release Notes:
- Debugger Beta: Add support for variable watchers
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
