This PR completes the process of moving git repository state storage and
scanning logic from the worktree crate to `project::git_store`.
Release Notes:
- N/A
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Conrad <conrad@zed.dev>
This PR fixes two bugs that cause unexpected behavior with breakpoints.
The first bug made it impossible to delete the last breakpoint in a file
in the workspace's database. This caused deleted breakpoints to remain
in the database and added to new projects.
The second bug was an edge case in the breakpoint context menu where
disabling/enabling a breakpoint would sometimes set a new breakpoint on
top of the old breakpoint.
Release Notes:
- N/A
This PR adds functionality for loading the diff for an arbitrary git
commit, and displaying it in a tab. To retrieve the diff for the commit,
I'm using a single `git cat-file --batch` invocation to efficiently load
both the old and new versions of each file that was changed in the
commit.
Todo
* Features
* [x] Open the commit view when clicking the most recent commit message
in the commit panel
* [x] Open the commit view when clicking a SHA in a git blame column
* [x] Open the commit view when clicking a SHA in a commit tooltip
* [x] Make it work over RPC
* [x] Allow buffer search in commit view
* [x] Command palette action to open the commit for the current blame
line
* Styling
* [x] Add a header that shows the author, timestamp, and the full commit
message
* [x] Remove stage/unstage buttons in commit view
* [x] Truncate the commit message in the tab
* Bugs
* [x] Dedup commit tabs within a pane
* [x] Add a tooltip to the tab
Release Notes:
- Added the ability to show past commits in Zed. You can view the most
recent commit by clicking its message in the commit panel. And when
viewing a git blame, you can show any commit by clicking its sha.
## Summary
This PR starts the process of adding debug task locators to Zed's
debugger system. A task locator is a secondary resolution phase that
allows a debug task to run a command before starting a debug session and
then uses the output of the run command to configure itself.
Locators are most applicable when debugging a compiled language but will
be helpful for any language as well.
## Architecture
At a high level, this works by adding a debug task queue to `Workspace`.
Which add's a debug configuration associated with a `TaskId` whenever a
resolved task with a debug config is added to `TaskInventory`'s queue.
Then, when the `SpawnInTerminal` task finishes running, it emits its
task_id and the result of the ran task.
When a ran task exits successfully, `Workspace` tells `Project` to start
a debug session using its stored debug config, then `DapStore` queries
the `LocatorStore` to configure the debug configuration if it has a
valid locator argument.
Release Notes:
- N/A
This is a slight refactor that flattens Breakpoint struct in
anticipation of condition/hit breakpoints. It also adds a slight delay
before breakpoints are shown on gutter hover to make breakpoints less
attention grabbing.
Release Notes:
- N/A
When a file is deleted outside of Zed, but it doesn't have any unsaved
changes, it shouldn't be considered "dirty" (prompting you before you
close it).
Release Notes:
- Fixed an bug where unchanged buffers were marked as conflicting if
their files were deleted outside of Zed.
---------
Co-authored-by: Antonio <antonio@zed.dev>
Fixes running git push on a coder instance.
Closes #ISSUE
Release Notes:
- Zed will now use `GIT_ASKPASS` if you already have one set instead of
overriding with our own. Fixes `git push` in Coder.
This PR does three things
- Right clicking within the gutter outside of the gutter fold area
bounds opens a breakpoint context menu
- Disabled breakpoints are now outline with the debugger accent color
instead of being fully colored at half opacity
- Clicking a breakpoint acts differently now
- Clicking a breakpoint while holding the platform modifier key will
disable/enable it
- Clicking a breakpoint hint while holding the platform modifier key
will set a disabled breakpoint
- Clicking a disabled breakpoint will enable it instead of deleting it
Release Notes:
- N/A
This PR adds two more cases to existing LSP completion cases.
- When text_edit exists: (New test)
1. we use text_edit, over insert_text and label
- When edit range exists (and text_edit is None): (New test)
1. insert_text is used over label if exists
2. label is used otherwise
- When not edit range exists (and text_edit is None): (Existing test)
1. insert_text is used over label if exists
2. label is used otherwise
Release Notes:
- N/A
This is a clean-up PR in anticipation of introduction of Debugger
Registry. I wanna get rid of DebugAdapterKind (or rather, it being an
enum).
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Closes#25761#21603
When `text_edit` is not available we directly fallback to to `label`.
That means, when we have range to replace, we never use `insertText` and
only use it when we haven't found any range.
This PR fixes, this and uses `insertText` as fallback first, and then
`label`.
Release Notes:
- Fixed an issue where accepting LSP snippet completion would insert the
label instead of expanding the snippet.
This is another in the series of PRs to make the GitStore own all
repository state and enable better concurrency control for git
repository scans.
After this PR, the `RepositoryEntry`s stored in worktree snapshots are
used only as a staging ground for local GitStores to pull from after
git-related events; non-local worktrees don't store them at all,
although this is not reflected in the types. GitTraversal and other
places that need information about repositories get it from the
GitStore. The GitStore also takes over handling of the new
UpdateRepository and RemoveRepository messages. However, repositories
are still discovered and scanned on a per-worktree basis, and we're
still identifying them by the (worktree-specific) project entry ID of
their working directory.
- [x] Remove WorkDirectory from RepositoryEntry
- [x] Remove worktree IDs from repository-related RPC messages
- [x] Handle UpdateRepository and RemoveRepository RPCs from the
GitStore
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This ensures that we do not get a bunch of error logs when using the
symbol search:
```
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:33+01:00 ERROR project] Method not found
...
```
Release Notes:
- N/A
This PR adds the ability to enable/disable breakpoints. It also fixes a
bug where toggling a log breakpoint from the breakpoint context menu
would add a standard breakpoint on top of the log breakpoint instead of
deleting it.
todo:
- [x] Add `BreakpointState` field Breakpoint that manages if a
breakpoint is active or not
- [x] Don't send disabled breakpoints to DAP servers - in progress
- [x] Half the opacity of disabled breakpoints - in progress
- [x] Add `BreakpointState` to database
- [x] Editor test for enabling/disabling breakpoints
- [ ] Integration Test to make sure we don't send disabled breakpoints
to DAP servers
- [x] Database test to make sure we properly serialize/deserialize
BreakpointState
Release Notes:
- N/A
---------
Co-authored-by: Piotr <piotr@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
This PR adds an action that clears all breakpoints and notifies any
active DAPs.
todo
- [x] Implement clear functionality
- [x] Write an integration test for this
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
Scaffolding for a revised way of logging in Zed. Very WIP, but the idea
is to allow maintainers to tell users to paste
```json
{
"log": {
"project.format": "trace"
}
}
```
into their settings so that even trace logs are emitted for the log
statements emitted from a logger under the `project.format` scope.
The plan is to eventually implement the `Log` trait from the `log` crate
instead of just wrapping the `log` crate, which will simplify the
implementation greatly, and remove our need for both the `env_logger`
and `simplelog` crates.
Additionally, work will be done to transition to using the scoped
logging APIs throughout the app, focusing on bug hotspots to start
(currently, scoped logging is only used in the format codepath).
Release Notes:
- N/A
This pull request paves way for exposing manifest tracking to
extensions.
- Project tree was renamed to manifest tree to better reflect it's
intent (and avoid confusion).
- Language server adapters now provide a name of their *manifest
locator*. If multiple language servers refer to the same locator, the
locating code will run just once for a given path.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: Anthony <anthony@zed.dev>
Closes https://github.com/zed-industries/zed/issues/14334, allowing
users to set environment variables for a language server binary like:
```json
"lsp": {
"rust-analyzer": {
"binary": {
"path": "/Users/dbarsky/.cargo/bin/rust-analyzer",
"env": {
"RA_PROFILE": "*>100"
}
},
}
}
```
The newly introduced environment variables are merged with the shell
environment. Perhaps more controversially, I've _also_ removed the
trimming/`stderr:`-prefixing of language server logs. This because
rust-analyzer has some nice, tree-shaped profiling built-in, and it
prevents us from printing profiles like this:
<details>
<img width="1147" alt="Screenshot 2025-03-20 at 12 09 14 PM"
src="https://github.com/user-attachments/assets/b7066651-6394-492b-b745-906c66d3c7b2"
/>
</details>
Release Notes:
- Added the ability to set a language server's environment variables.
- Removed the `stderr`-prefix of a language server's stderr logs.
This is a pure refactoring PR that goes through all the git-related APIs
exposed by the worktree crate and minimizes their use outside that
crate, migrating callers of those APIs to read from the GitStore
instead. This is to prepare for evacuating git repository state from
worktrees and making the GitStore the new source of truth.
Other drive-by changes:
- `project::git` is now `project::git_store`, for consistency with the
other project stores
- the project panel's test module has been split into its own file
Release Notes:
- N/A
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR updates our DB schemas and wire protocol to separate the
synchronization of git statuses and other repository state from the
synchronization of worktrees. This paves the way for moving the code
that executes git status updates out of the `worktree` crate and onto
the new `GitStore`. That end goal is motivated by two (related) points:
- Disentangling git status updates from the worktree's
`BackgroundScanner` will allow us to implement a simpler concurrency
story for those updates, hopefully fixing some known but elusive bugs
(upstream state not updating after push; statuses getting out of sync in
remote projects).
- By moving git repository state to the project-scoped `GitStore`, we
can get rid of the duplication that currently happens when two worktrees
are associated with the same git repository.
Co-authored-by: Max <max@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR fixes a few issues around shutting down a debug adapter.
The first issue I discovered was when I shut down all sessions via
`shutdown all adapters` command. We would still fetch the threads
request again, because we receive a thread event that indicated that it
exited. But this will always time out because the debug adapter is
already shutdown at this point, so by updating the check so we don't
allow fetching a request when the session is terminated fixes the issue.
The second issue fixes a bug where we would always shut down the parent
session, when a child session is terminated. This was reintroduced by
the big refactor. This is not something we want, because you could
receive multiple StartDebugging reverse requests, so if one child is
shutting down that does not mean the other ones should have been
shutting down as well.
Issue was original fixed in
https://github.com/RemcoSmitsDev/zed/pull/80#issuecomment-2573943661.
## TODO:
- [x] Add tests
Release Notes:
- N/A
Closes#24588Closes#25419
Restructures `LspStore.format_local` a decent bit in order to make how
the transaction history is preserved more clear, and in doing so fix
various bugs with how the transaction history is handled during a format
request (especially when formatting in remote dev)
Release Notes:
- Fixed an issue that prevented formatting from working when working
with remote dev
- Fixed an issue when using code actions as a format step where the
edits made by the code actions would not be grouped with the other
format edits in the undo history
