This PR changes the thread list dropdown menu in the debugger UI to
eagerly preview the state of a thread when selecting it, instead of
waiting until confirming the selection.
Release Notes:
- N/A
To make DAP work over SSH we want to create the binary
at the project level (so we can wrap it in an `ssh` invocation
transparently).
This means not pushing the adapter down into the session, and resolving
more information ahead-of-time.
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Piotr <piotr@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Piotr <piotr@zed.dev>
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony <anthony@zed.dev>
This PR makes a debugger's pane layout persistent across session's that
use the same debug adapter.
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Cole Miller <m@cole-miller.net>
This PR lightly refactors the `EditorMode::Full` exposing two new
methods: `is_full` and `set_mode`.
Motivation is to expose fields that modify the behavior when the editor
is in `Full` mode. By using is `mode.is_full()` instead of
`EditorMode::Full` we can introduce new fields without breaking other
places in the code.
Release Notes:
- N/A
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
The debug console will now show an indicator when it's unopened and
there's unread messages.
`NewSessionModal` attempts to resolve debug configurations before using
the config to start debugging. This allows users to use zed's task
variables in the modal prompt.
I had to invert tasks_ui dependency on debugger_ui so `NewSessionModal`
could get the correct `TaskContexts` by calling tasks_ui functions. A
consequence of this workspace has a new event `ShowAttachModal` that I'm
not a big fan of. @osiewicz if you have time could you please take a
look to see if there's a way around adding the event. I'm open to pair
on it too.
Release Notes:
- N/A
## Summary
### Actions
This PR implements actions that allow a user to "run to cursor" and
"evaluate selected text" while there's an active debug session and
exposes the functionality to the UI as well.
- Run to cursor: Can be accessed by right clicking on the gutter
- Evaluate selected text: Can be accessed by selecting text then right
clicking in the editor
### Bug fixes
I also fixed these bugs as well
- Panic when using debugger: Stop action
- Debugger actions command palette filter not working properly in all
cases
- We stopped displaying the correct label in the session's context menu
when a session was terminated
Release Notes:
- N/A
---------
Co-authored-by: Max Brunsfeld <max@zed.dev>
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Adds actions so you can have customized keybindings for `insert` and
`replace` modes.
And add `shift-enter` as a default for `replace`, this will override the
default setting
`completions.lsp_insert_mode` which is set to `replace_suffix`, which
tries to "smartly"
decide whether to replace or insert based on the surrounding text.
For those who come from VSCode, if you want to mimic their behavior, you
only have to
set `completions.lsp_insert_mode` to `insert`.
If you want `tab` and `enter` to do different things, you need to remap
them, here is
an example:
```jsonc
[
// ...
{
"context": "Editor && showing_completions",
"bindings": {
"enter": "editor::ConfirmCompletionInsert",
"tab": "editor::ConfirmCompletionReplace"
}
},
]
```
Closes#24577
- [x] Make LSP completion insertion mode decision in guest's machine
(host is currently deciding it and not allowing guests to have their own
setting for it)
- [x] Add shift-enter as a hotkey for `replace` by default.
- [x] Test actions.
- [x] Respect the setting being specified per language, instead of using
the "defaults".
- [x] Move `insert_range` of `Completion` to the Lsp variant of
`.source`.
- [x] Fix broken default, forgotten after
https://github.com/zed-industries/zed/pull/27453#pullrequestreview-2736906628,
should be `replace_suffix` and not `insert`.
Release Notes:
- LSP completions: added actions `ConfirmCompletionInsert` and
`ConfirmCompletionReplace` that control how completions are inserted,
these override `completions.lsp_insert_mode`, by default, `shift-enter`
triggers `ConfirmCompletionReplace` which replaces the whole word.
This PR adds colors to debug panel's session menu that indicate the
state of each respective session. It also adds a close button to each
entry.
green - running
yellow - stopped
red - terminated/ended
Release Notes:
- N/A
There were two bugs that caused the gdb adapter not to work properly,
one on our end and one their end.
The bug on our end was sending `stopOnEntry: null` in our launch request
when stop on entry had no value. I fixed that bug across all dap
adapters
The other bug had to do with python's "great" type system and how we
serialized our unit structs to json; mainly,
`ConfigurationDoneArguments` and `ThreadsArguments`. Gdb seems to follow
a pattern for handling requests where they pass `**args` to a function,
this errors out when the equivalent json is `"arguments": null`.
```py
@capability("supportsConfigurationDoneRequest")
@request("configurationDone", on_dap_thread=True)
def config_done(**args): ### BUG!!
...
```
Release Notes:
- N/A
I wanted this for CONL (https://conl.dev )'s nascent langauge server,
and it seems like most of the support was already wired up on the LSP
side, so this surfaces it into the editor.
Release Notes:
- Added support for the `insert_text_mode` field of completions from the
language server protocol.
This PR removes replaces the `.unwrap`s when accessing the debug panel
with `if let Some`s.
These `.unwrap`s are not locally verifiable, and thus are not safe.
Release Notes:
- N/A
This PR adds passing in `stop_on_entry` to debug configs in debug.json
instead of going through initialization args.
This has two benefits:
1. It's more streamlined to a user since every internal adapter supports
`stop_on_entry` for launch requests and Go's adapter supports it for
attach requests too.
2. It will allow @osiewicz `NewSesssionModal` PR to use this field for
the stop on entry checkbox.
Release Notes:
- N/A
## Summary
This PR starts the process of adding debug task locators to Zed's
debugger system. A task locator is a secondary resolution phase that
allows a debug task to run a command before starting a debug session and
then uses the output of the run command to configure itself.
Locators are most applicable when debugging a compiled language but will
be helpful for any language as well.
## Architecture
At a high level, this works by adding a debug task queue to `Workspace`.
Which add's a debug configuration associated with a `TaskId` whenever a
resolved task with a debug config is added to `TaskInventory`'s queue.
Then, when the `SpawnInTerminal` task finishes running, it emits its
task_id and the result of the ran task.
When a ran task exits successfully, `Workspace` tells `Project` to start
a debug session using its stored debug config, then `DapStore` queries
the `LocatorStore` to configure the debug configuration if it has a
valid locator argument.
Release Notes:
- N/A
This is a clean-up PR in anticipation of introduction of Debugger
Registry. I wanna get rid of DebugAdapterKind (or rather, it being an
enum).
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
This PR improves the keyboard navigation for the variable list.
Before this PR, if you want to open/close nested variables, you had to
use the right/left & up/down arrow keys.
Now you can step through with just only using your left/right arrow
keys, this feels a bit more natural and more similar to how other
editors allow you to navigate through variables.
This PR also fixes the following issues:
- Allow selecting a scope to be the start of your selection
- Allow selecting previous item if the first item is selected
-----
https://github.com/user-attachments/assets/aff0b133-97be-4c09-8ee6-b11495ad5568
Release Notes:
- N/A
This PR adds an action that clears all breakpoints and notifies any
active DAPs.
todo
- [x] Implement clear functionality
- [x] Write an integration test for this
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
This PR fixes a few issues around shutting down a debug adapter.
The first issue I discovered was when I shut down all sessions via
`shutdown all adapters` command. We would still fetch the threads
request again, because we receive a thread event that indicated that it
exited. But this will always time out because the debug adapter is
already shutdown at this point, so by updating the check so we don't
allow fetching a request when the session is terminated fixes the issue.
The second issue fixes a bug where we would always shut down the parent
session, when a child session is terminated. This was reintroduced by
the big refactor. This is not something we want, because you could
receive multiple StartDebugging reverse requests, so if one child is
shutting down that does not mean the other ones should have been
shutting down as well.
Issue was original fixed in
https://github.com/RemcoSmitsDev/zed/pull/80#issuecomment-2573943661.
## TODO:
- [x] Add tests
Release Notes:
- N/A
This is the core change:
https://github.com/zed-industries/zed/pull/26758/files#diff-044302c0d57147af17e68a0009fee3e8dcdfb4f32c27a915e70cfa80e987f765R1052
TODO:
- [x] Use AsyncFn instead of Fn() -> Future in GPUI spawn methods
- [x] Implement it in the whole app
- [x] Implement it in the debugger
- [x] Glance at the RPC crate, and see if those box future methods can
be switched over. Answer: It can't directly, as you can't make an
AsyncFn* into a trait object. There's ways around that, but they're all
more complex than just keeping the code as is.
- [ ] Fix platform specific code
Release Notes:
- N/A
### DISCLAIMER
> As of 6th March 2025, debugger is still in development. We plan to
merge it behind a staff-only feature flag for staff use only, followed
by non-public release and then finally a public one (akin to how Git
panel release was handled). This is done to ensure the best experience
when it gets released.
### END OF DISCLAIMER
**The current state of the debugger implementation:**
https://github.com/user-attachments/assets/c4deff07-80dd-4dc6-ad2e-0c252a478fe9https://github.com/user-attachments/assets/e1ed2345-b750-4bb6-9c97-50961b76904f
----
All the todo's are in the following channel, so it's easier to work on
this together:
https://zed.dev/channel/zed-debugger-11370
If you are on Linux, you can use the following command to join the
channel:
```cli
zed https://zed.dev/channel/zed-debugger-11370
```
## Current Features
- Collab
- Breakpoints
- Sync when you (re)join a project
- Sync when you add/remove a breakpoint
- Sync active debug line
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Restart stack frame (if adapter supports this)
- Variables
- Loaded sources
- Modules
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Debug console
- Breakpoints
- Log breakpoints
- line breakpoints
- Persistent between zed sessions (configurable)
- Multi buffer support
- Toggle disable/enable all breakpoints
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Show collapsed stack frames
- Restart stack frame (if adapter supports this)
- Loaded sources
- View all used loaded sources if supported by adapter.
- Modules
- View all used modules (if adapter supports this)
- Variables
- Copy value
- Copy name
- Copy memory reference
- Set value (if adapter supports this)
- keyboard navigation
- Debug Console
- See logs
- View output that was sent from debug adapter
- Output grouping
- Evaluate code
- Updates the variable list
- Auto completion
- If not supported by adapter, we will show auto-completion for existing
variables
- Debug Terminal
- Run custom commands and change env values right inside your Zed
terminal
- Attach to process (if adapter supports this)
- Process picker
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Disconnect
- Restart
- Stop
- Warning when a debug session exited without hitting any breakpoint
- Debug view to see Adapter/RPC log messages
- Testing
- Fake debug adapter
- Fake requests & events
---
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
Co-authored-by: Piotr <piotr@zed.dev>
