This is a behavior-preserving change, but lays the groundwork for
expanding selections when the cursor lands inside of a "replace" block.
Release Notes:
- N/A
Release Notes:
- Fixed an issue where diagnostic underlines and certain text highlights
were not rendered correctly below block decorations such as the inline
assistant prompt.
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Richard <richard@zed.dev>
Previously, when scrolling the diagnostics view with the mouse, we'd get
a spurious horizontal scroll (even if the content was not overflowing
horizontally) due to an error in the widths of the diagnostic blocks.
Release Notes:
- Fixed an issue where the project diagnostics view spuriously allowed
horizontal scrolling by a small amount.
Closes#19758
Release Notes:
- Added feature to show commit summary as part of the inline Git blame
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
Just spotted a tiny error that was causing us to continue looking for
nested folds 1 layer deeper than any fold already found at the target
level. We shouldn't continue to seek for a deeper fold after the fold at
the target level is found.
Tested on a debug build and used `editor.rs` as the source material:
```
Old
Level 1 fold:
[crates/editor/src/editor.rs:10777:9] counter = 2806
[crates/editor/src/editor.rs:10778:9] time_elapsed = 320.570792ms
Level 2 fold:
[crates/editor/src/editor.rs:10777:9] counter = 5615
[crates/editor/src/editor.rs:10778:9] time_elapsed = 497.4305ms
Level 3 fold:
[crates/editor/src/editor.rs:10777:9] counter = 7528
[crates/editor/src/editor.rs:10778:9] time_elapsed = 619.818334ms
New
Level 1 fold:
[crates/editor/src/editor.rs:10776:9] counter = 543
[crates/editor/src/editor.rs:10777:9] time_elapsed = 139.115625ms
Level 2 fold:
[crates/editor/src/editor.rs:10776:9] counter = 2806
[crates/editor/src/editor.rs:10777:9] time_elapsed = 312.560416ms
Level 3 fold:
[crates/editor/src/editor.rs:10776:9] counter = 5615
[crates/editor/src/editor.rs:10777:9] time_elapsed = 498.873292ms
```
Release Notes:
- N/A
Turns out that we used client-side `fs` to check whether something is a
directory or not, which obviously doesn't work with SSH projects.
Release Notes:
- N/A
---------
Co-authored-by: Bennet <bennet@zed.dev>
Closes#19372
Release Notes:
- Fixed autoclosing quotes when the string is already open.
- Added autoclosing of rust multiline strings
---------
Co-authored-by: Kurt Wolf <kurtwolfbuilds@gmail.com>
I went with Cmd-Shift-Y on macOS (Ctrl-Shift-Y on Linux) for "yes accept
this individual hunk" - both are currently unused.
I went with Cmd-Shift-A on macOS (Ctrl-Alt-A on Linux) for "accept all
hunks" - both are unused. (Ctrl-Shift-A on Linux was taken, as is
Ctrl-Alt-Y, so although the pairing of Ctrl-Shift-Y and Ctrl-Alt-A isn't
necessarily obvious, the letters seem intuitive - "yes" and "all" - and
those key combinations don't conflict with anything.)
Release Notes:
- Added keybindings for applying hunks in Proposed Changes
<img width="247" alt="Screenshot 2024-10-25 at 12 47 00 PM"
src="https://github.com/user-attachments/assets/d6355621-ba80-4ee2-8918-b7239a4d29be">
This PR adds the ability for editor blocks to replace lines of text, but
does not yet use that feature anywhere. We'll update assistant patches
to use replace blocks on another branch:
https://github.com/zed-industries/zed/tree/assistant-patch-replace-blocks
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Richard Feldman <richard@zed.dev>
Co-authored-by: Marshall Bowers <marshall@zed.dev>
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Certain files like Rust stdlib ones can be opened by cmd-clicking on
terminal, editor contents, etc.
Those files will not belong to the current worktree, so a fake worktree,
with a single file, invisible (i.e. its dir(s) will not be shown in the
UI such as project panel), will be created on the file opening.
When the file is closed, the worktree is closed and removed along the
way, so those worktrees are considered ephemeral and their ids are not
stored in the database.
This causes issues on reopening such files when they are closed.
The PR makes Zed to fall back to opening the file by abs path when it's
not in the project metadata, but has the abs path stored in history or
in the opened items DB data.
Release Notes:
- Handle external worktree entries [re]open better
This PR makes it so that when we apply changes within a branch
buffer—currently just the edits buffer—we save the underlying buffer.
This also fixes an issue where new files created via edits were not
properly flushed to disk.
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Closes https://github.com/zed-industries/zed/issues/8534
Supersedes https://github.com/zed-industries/zed/pull/16349
Potential concerns:
* we do not follow up to the `/` when looking for `.editorconfig`, only
up to the worktree root.
Seems fine for most of the cases, and the rest should be solved
generically later, as the same issue exists for settings.json
* `fn language` in `AllLanguageSettings` is very hot, called very
frequently during rendering. We accumulate and parse all `.editorconfig`
file contents beforehand, but have to go over globs and match these
against the path given + merge the properties still.
This does not seem to be very bad, but needs more testing and
potentially some extra caching.
Release Notes:
- Added .editorconfig support
---------
Co-authored-by: Ulysse Buonomo <buonomo.ulysse@gmail.com>
This simplifies rendering of excerpt headers and footers, and removes
the need to store a `BlockDisposition` on these boundary blocks. It's a
step toward implementing "replace blocks", which we want to use in the
assistant panel.
We've also cleaned up the way heights are specified for headers and
footers and fixed some visual asymmetries between the "expand upward"
and "expand downward" buttons.
Release Notes:
- N/A
---------
Co-authored-by: Richard <richard@zed.dev>
This changes the `/workflow` command so that instead of emitting edits
in separate steps, the user is presented with a single tab, with an
editable diff that they can apply to the buffer.
Todo
* Assistant panel
* [x] Show a patch title and a list of changed files in a block
decoration
* [x] Don't store resolved patches as state on Context. Resolve on
demand.
* [ ] Better presentation of patches in the panel
* [ ] Show a spinner while patch is streaming in
* Patches
* [x] Preserve leading whitespace in new text, auto-indent insertions
* [x] Ensure patch title is very short, to fit better in tab
* [x] Improve patch location resolution, prefer skipping whitespace over
skipping `}`
* [x] Ensure patch edits are auto-indented properly
* [ ] Apply `Update` edits via a diff between the old and new text, to
get fine-grained edits.
* Proposed changes editor
* [x] Show patch title in the tab
* [x] Add a toolbar with an "Apply all" button
* [x] Make `open excerpts` open the corresponding location in the base
buffer (https://github.com/zed-industries/zed/pull/18591)
* [x] Add an apply button above every hunk
(https://github.com/zed-industries/zed/pull/18592)
* [x] Expand all diff hunks by default
(https://github.com/zed-industries/zed/pull/18598)
* [x] Fix https://github.com/zed-industries/zed/issues/18589
* [x] Syntax highlighting doesn't work until the buffer is edited
(https://github.com/zed-industries/zed/pull/18648)
* [x] Disable LSP interaction in Proposed Changes editor
(https://github.com/zed-industries/zed/pull/18945)
* [x] No auto-indent? (https://github.com/zed-industries/zed/pull/18984)
* Prompt
* [ ] make sure old_text is unique
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Richard <richard@zed.dev>
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
* uses the state that's synced, to fetch the language server name
* uses proper, canonicalized path when creating a remote ssh worktree,
otherwise `~/foo/something` stays unexpanded
Release Notes:
- N/A
I've been a bit annoyed by the hover divider rule being extremely bright
compared to other divider rules in the UI. This PR updates their color
to use the regular border color from the current theme instead of the
muted (but still pretty bright) text color.
Apologies for the unsolicited PR (and please feel free to close if it
goes against some other plans / designs you already have in place :).
#### Example screenshot before:
<img width="302" alt="Screenshot 2024-10-15 at 23 29 18"
src="https://github.com/user-attachments/assets/7ea22808-8135-4a46-9457-e670225aebaa">
#### Example screenshot after:
<img width="312" alt="Screenshot 2024-10-15 at 23 28 16"
src="https://github.com/user-attachments/assets/63ac0d02-ae6d-4962-84a2-1fdb95519b15">
***
Release Notes:
- Make the divider rule in LSP hovers more muted
Release Notes:
- Added a new `editor: format selections` action that allows formatting
only the currently selected text via the primary language server.
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
Supersedes https://github.com/zed-industries/zed/pull/19166
TODO:
- [x] Update basic zed paths
- [x] update create_state_directory
- [x] Use this with `NodeRuntime`
- [x] Add server settings
- [x] Add an 'open server settings command'
- [x] Make sure it all works
Release Notes:
- Updated the actions `zed::OpenLocalSettings` and `zed::OpenLocalTasks`
to `zed::OpenProjectSettings` and `zed::OpenProjectTasks`.
---------
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Richard <richard@zed.dev>
TL;DR: Another O(n^2) strikes.
In #19194 we received a report about a 7Mb JSON file that Zed struggles
with. Naturally this file showcased a O(n^2) in line layout; this file
has one long line.
During line layout for Mac we have to convert between UTF-16 and UTF-8
indices in the string, as CoreText works with UTF-16 and Rust strings
are UTF-8. The problem stemmed from the fact that we were re-seeking our
string converter on each glyph, which boils down to: we were reparsing
[0..curr_string_position] bytes up to full length of the string, which
is the O(n^2) in question. This PR changes this behaviour to reuse the
Index Converter if the position we're seeking to is not yet reached.
Basically, we're treating the converter as forward iterator and we try
to seek with the same iterator, if possible.
Where previously you could not even open the file in OP (within
reasonable time frame, I waited for 40 seconds before giving up), now
you can do it in.. slightly over a second. The best part is: the
experience is still not ideal. Typing in the buffer is sluggish. Still,
this is a start.
Release Notes:
- Mac: Improved performance with very long lines
Currently terminal.cursor_shape uses `underline` and `cursor_shape` uses
`underscore`.
This standardizes them so they use the same settings value.
I think `underline` is the more common term and it matches the
terminology used by VSCode, Alacritty, iTerm, etc.
Note the protobuf enum `CursorShape::CursorUnderscore` remains
unchanged.
See also:
- https://github.com/zed-industries/zed/pull/18530
- https://github.com/zed-industries/zed/pull/17572
Release Notes:
- Settings: rename one `cursor_shape` from `underscore` to `underline`
(breaking change).
* `Open Excerpts` command always opens the locations in the base buffer
* LSP features like document-highlights, go-to-def, and inlay hints work
correctly in branch buffers
* Other LSP features like completions, code actions, and rename are
disabled in branch buffers
Release Notes:
- N/A
Reworks the way tasks are stored, accessed and synchronized in the
`project`.
Now both collab and ssh remote projects use the same TaskStorage kind to
get the task context from the remote host, and worktree task templates
are synchronized along with other worktree settings.
Release Notes:
- Adds ssh support to tasks, improves collab-remote projects' tasks sync
After https://github.com/rust-lang/rust-analyzer/pull/18167 and certain
people who type and complete rapidly, it turned out that we have not
waited for `completionItem/resolve` to finish before applying the
completion results.
Release Notes:
- Fixed completion items applied improperly on fast typing
This PR qualifies a call to `RangeExt::overlaps` to avoid some confusion
in rust-analyzer not being able to distinguish between
`RangeExt::overlaps` and `AnchorRangeExt::overlaps` and producing
phantom diagnostics.
We may also want to consider renaming the method on `AnchorRangeExt` to
disambiguate them.
Release Notes:
- N/A
