Closes https://github.com/zed-industries/zed/issues/23386
This PR updates the scrollbar-component to account for padding present
in the parent container.
Since the linked issue was opened,
https://github.com/zed-industries/zed/pull/25288 improved the behaviour
so that the scrollbar does allow scrolling the entire container, however
the scrollbar thumb still does not go the entire way to the bottom. This
can be seen here:
https://github.com/user-attachments/assets/89204355-e6b8-428b-9fa9-bb614051b6fa
This happens because during layouting of the scrollbar, padding of the
parent container is not taken into account. The scrollbar thumb size is
calculated as if no padding was present.
With this change, padding is now included in the calculation, which
resolves the issue:
https://github.com/user-attachments/assets/1d4c62e0-4555-4332-a9ab-4e114684b4b3
The change here is to store the calculated content size during prepaint
_including_ padding and use this for layouting the scrollbar. This
ensures that the actual scroll max and the content size are always in
sync. Furthermore, the existing `TODO`-comment is also resolved, as we
now no longer look at the size of the last child but the actual parent
size instead.
This also removes an existing panic of the scrollbar-component in cases
where the content size was 0, which was previously not accounted for
(this never happened in practice so far, for example because of the
padding added here:
43712285bf/crates/editor/src/hover_popover.rs (L802-L809)
which prevented the container size from ever being 0).
---
Lastly, as I was wiring through the changes of the `content_size` I
noticed that some code was duplicated during the initial layouting as
well as in the click handlers. I refactored this in the second commit to
use `along` where possible as well as computing the new click offset in
one closure which can be passed to both event listeners. As always,
should any of these changes not be wanted, feel free to let me know and
I will revert these.
Looking forward to your feedback 😄
Release Notes:
- Fixed scrollbars sometimes not scrolling all the way to the bottom.
Bounded this action to the same defaults `task::Rerun` is bound to.
Unlike the `task::Rerun` which will always rerun the latest task, this
command reruns the current task tab, if focused.
The task is not in scope when the terminal pane is not focused, and
falls back to the regular rerun if invoked on a task-less terminal tab.
This way, we can add a proper tooltip to the terminal tab reruns:
<img width="231" alt="image"
src="https://github.com/user-attachments/assets/2cdd7458-5ba2-4cc7-a10b-3e2db059f1ca"
/>
Release Notes:
- Added `terminal::RerunTask` task action
Closes https://github.com/zed-industries/zed/issues/25110https://github.com/user-attachments/assets/4624c256-8dfb-48eb-a726-6cf130d946da
Terminal may update its hovered word way before reporting it to the
terminal view, and that processing the file check later.
Hence, store the terminal hover data in the terminal view and avoid
highlights when it's different from what the terminal has (as the source
of truth here).
In addition, now only does hover refreshes when the terminal hover
actually changes, not on every event report.
Release Notes:
- Fixed underline flicker when switching cmd-hovered words in terminal
To-dos:
- [x] Expose the command to defend against cases where that's just super
long
- [x] Tackle the vertical scroll conflict with panel scroll
- [x] Reduce default font-size
Release Notes:
- N/A
---------
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
resolves#24655resolves#23945
I haven't yet added a default binding for the new command. #27797 added `:ls` and
`:buffers` which in my opinion should use the global searchable version
given that that matches the vim semantics of those commands better than
just showing the tabs in the local pane.
There's also a question of what to do when you select a tab from another
pane, should the focus jump to that pane or should that tab move to the
currently focused pane? For now I've implemented the former.
Release Notes:
- Added `tab_switcher::ToggleAll` to search open tabs from all panes and focus the selected one.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Part of https://github.com/zed-industries/zed/issues/16472
* Adds debug logging to everywhere near INSERT/UPDATEs in the DB
So something like
`env RUST_LOG=debug,wasmtime_cranelift=off,cranelift_codegen=off,vte=off
cargo run` could be used to view these (current zlog seems to process
the exclusions odd, so not sure this is the optimal RUST_LOG line) can
be used to debug any further writes.
* Removes excessive window stack serialization
Previously, it serialized unconditionally every 100ms.
Now, only if the stack had changed, which is now check every 500ms.
* Removes excessive terminal serialization
Previously, it serialized its `cwd` on every `ItemEvent::UpdateTab`
which was caused by e.g. any character output.
Now, only if the `cwd` has changed at the next event processing time.
Release Notes:
- Fixed more excessive DB writes
Attempt to lookup exact relative paths before full worktree traversal,
only do the full traversal if all other methods fail.
Closes https://github.com/zed-industries/zed/issues/28407
Release Notes:
- Fixed wrong paths opening when cmd-clicking in the terminal
Split `locator` out of DebugTaskDefinition to make it clearer when
location needs to happen.
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Cole Miller <m@cole-miller.net>
This PR adds functionality to right click in terminal create new
selection if none present. The selection is identical with double click
a text in terminal, plus the logic is moved from the double-click in the
terminal::mouse_down.
Closes#28237
Release Notes:
- Adds functionality to right click in terminal create new selection if
none present
This PR renames the `regex_search` tool to `grep` because I think it
conveys more meaning to the model, the idea of searching the filesystem
with a regular expression. It's also one word and the model seems to be
using it effectively after some additional prompt tuning.
It also takes an include pattern to filter on the specific files we try
to search. I'd like to encourage the model to scope its searches more
aggressively, as in my testing, I'm only seeing it filter on file
extension.
Release Notes:
- N/A
Release Notes:
- Added the ability to copy external files into remote projects by
dragging them onto the project panel.
---------
Co-authored-by: Peter Tripp <petertripp@gmail.com>
This PR fixes an issue where mouse selection in the terminal would be
offset when the Terminal Inline Assistant was active. The problem was
caused by incorrect coordinate translation when handling mouse events
with an active inline assistant.
The fix adjusts mouse event coordinates by properly accounting for the
terminal view's `scroll_top` value when the inline assistant is present,
ensuring that text selection precisely follows the mouse cursor
position.
Closes#26111
Release Notes:
- Fixed text selection misalignment in terminal when the inline
assistant is active
Co-authored-by: Peter Tripp <peter@zed.dev>
This adds a "workspace-hack" crate, see
[mozilla's](https://hg.mozilla.org/mozilla-central/file/3a265fdc9f33e5946f0ca0a04af73acd7e6d1a39/build/workspace-hack/Cargo.toml#l7)
for a concise explanation of why this is useful. For us in practice this
means that if I were to run all the tests (`cargo nextest r
--workspace`) and then `cargo r`, all the deps from the previous cargo
command will be reused. Before this PR it would rebuild many deps due to
resolving different sets of features for them. For me this frequently
caused long rebuilds when things "should" already be cached.
To avoid manually maintaining our workspace-hack crate, we will use
[cargo hakari](https://docs.rs/cargo-hakari) to update the build files
when there's a necessary change. I've added a step to CI that checks
whether the workspace-hack crate is up to date, and instructs you to
re-run `script/update-workspace-hack` when it fails.
Finally, to make sure that people can still depend on crates in our
workspace without pulling in all the workspace deps, we use a `[patch]`
section following [hakari's
instructions](https://docs.rs/cargo-hakari/0.9.36/cargo_hakari/patch_directive/index.html)
One possible followup task would be making guppy use our
`rust-toolchain.toml` instead of having to duplicate that list in its
config, I opened an issue for that upstream: guppy-rs/guppy#481.
TODO:
- [x] Fix the extension test failure
- [x] Ensure the dev dependencies aren't being unified by Hakari into
the main dependencies
- [x] Ensure that the remote-server binary continues to not depend on
LibSSL
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
## Summary
This PR starts the process of adding debug task locators to Zed's
debugger system. A task locator is a secondary resolution phase that
allows a debug task to run a command before starting a debug session and
then uses the output of the run command to configure itself.
Locators are most applicable when debugging a compiled language but will
be helpful for any language as well.
## Architecture
At a high level, this works by adding a debug task queue to `Workspace`.
Which add's a debug configuration associated with a `TaskId` whenever a
resolved task with a debug config is added to `TaskInventory`'s queue.
Then, when the `SpawnInTerminal` task finishes running, it emits its
task_id and the result of the ran task.
When a ran task exits successfully, `Workspace` tells `Project` to start
a debug session using its stored debug config, then `DapStore` queries
the `LocatorStore` to configure the debug configuration if it has a
valid locator argument.
Release Notes:
- N/A
This reverts commit be657aefa3. (#27572)
Unfortunately this change broke other bindings in the terminal like
`cmd-left`
and `cmd-right`.
We do need to redo the terminal IME handling at some point, but we'll
need a
bit more thought to find an approach that works.
Release Notes:
- N/A
Closes#4461
Take 2 on https://github.com/zed-industries/zed/pull/25040.
Fixes panic caused due to using `setHiddenUntilMouseMoves` return type
to `set` cursor on macOS.
Release Notes:
- Now cursor hides when the user is typing in editor. It will stay
hidden until it is moved again. This behavior is `true` by default, and
can be configured with `hide_mouse_while_typing` in settings.
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
Co-authored-by: Thomas Mickley-Doyle <thomas@zed.dev>
Co-authored-by: Agus <agus@zed.dev>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Co-authored-by: Angelk90 <angelo.k90@hotmail.it>
It doesn't make sense to have `Pixels: Mul<Pixels, Output = Pixels>` as
the output should be `Pixels^2` (area), so these impls are removed. All
code where these impls were used are improved by instead multiplying by
`f32` or `usize`.
Also adds math op impls that are present for `Pixels` but absent for
`ScaledPixels`. Adds missing `Mul<Pixels> for usize` to both.
Release Notes:
- N/A
This is the core change:
https://github.com/zed-industries/zed/pull/26758/files#diff-044302c0d57147af17e68a0009fee3e8dcdfb4f32c27a915e70cfa80e987f765R1052
TODO:
- [x] Use AsyncFn instead of Fn() -> Future in GPUI spawn methods
- [x] Implement it in the whole app
- [x] Implement it in the debugger
- [x] Glance at the RPC crate, and see if those box future methods can
be switched over. Answer: It can't directly, as you can't make an
AsyncFn* into a trait object. There's ways around that, but they're all
more complex than just keeping the code as is.
- [ ] Fix platform specific code
Release Notes:
- N/A
### DISCLAIMER
> As of 6th March 2025, debugger is still in development. We plan to
merge it behind a staff-only feature flag for staff use only, followed
by non-public release and then finally a public one (akin to how Git
panel release was handled). This is done to ensure the best experience
when it gets released.
### END OF DISCLAIMER
**The current state of the debugger implementation:**
https://github.com/user-attachments/assets/c4deff07-80dd-4dc6-ad2e-0c252a478fe9https://github.com/user-attachments/assets/e1ed2345-b750-4bb6-9c97-50961b76904f
----
All the todo's are in the following channel, so it's easier to work on
this together:
https://zed.dev/channel/zed-debugger-11370
If you are on Linux, you can use the following command to join the
channel:
```cli
zed https://zed.dev/channel/zed-debugger-11370
```
## Current Features
- Collab
- Breakpoints
- Sync when you (re)join a project
- Sync when you add/remove a breakpoint
- Sync active debug line
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Restart stack frame (if adapter supports this)
- Variables
- Loaded sources
- Modules
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Debug console
- Breakpoints
- Log breakpoints
- line breakpoints
- Persistent between zed sessions (configurable)
- Multi buffer support
- Toggle disable/enable all breakpoints
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Show collapsed stack frames
- Restart stack frame (if adapter supports this)
- Loaded sources
- View all used loaded sources if supported by adapter.
- Modules
- View all used modules (if adapter supports this)
- Variables
- Copy value
- Copy name
- Copy memory reference
- Set value (if adapter supports this)
- keyboard navigation
- Debug Console
- See logs
- View output that was sent from debug adapter
- Output grouping
- Evaluate code
- Updates the variable list
- Auto completion
- If not supported by adapter, we will show auto-completion for existing
variables
- Debug Terminal
- Run custom commands and change env values right inside your Zed
terminal
- Attach to process (if adapter supports this)
- Process picker
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Disconnect
- Restart
- Stop
- Warning when a debug session exited without hitting any breakpoint
- Debug view to see Adapter/RPC log messages
- Testing
- Fake debug adapter
- Fake requests & events
---
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
Co-authored-by: Piotr <piotr@zed.dev>
Closes https://github.com/zed-industries/zed/issues/26431
Follow-up of https://github.com/zed-industries/zed/pull/26174
`path_with_position.path.strip_prefix(&worktree_root)` used in the PR is
wrong for cases of single-file worktrees, where it will return empty
paths that will result in incorrect project and FS entries accessed.
Release Notes:
- Fixed goto single file worktrees during terminal cmd-clicks
This PR includes lots of small fixes to get our `build.nix` and
`shell.nix` back to a working state.
I've tested this by running `cargo run` (inside the devshell) and `nix
run` on x86 nixos and arm64 darwin machines. I'd appreciate it if others
could test building inside the devshell to double-check that it's not
just working because I happen to have some system-level packages
installed, as well as seeing if it works on other platforms (non-nixos
linux, arm linux, x86 darwin).
I couldn't get the full test suite (`cargo nextest run --workspace`)
passing in the devshell on darwin, but they _are_ all passing on nixos.
nixpkgs [disables some of our
tests](92d11f06d5/pkgs/by-name/ze/zed-editor/package.nix (L226-L234))
that apparently fail or are flakey on hydra, but they don't know why.
I'm going to punt on debugging those for now, especially given that they
seem to be working for me. I'm also unsure of whether we actually want
the nix checkPhase to run the full test suite (it's currently not
passing `--workspace`) given that we have separate CI that should
enforce that those pass on all PRs.
Here's an overview of the changes made:
- Fix our `generate-licenses` script
- Relaxes the `cargo-about` version requirement slightly so it doesn't
try to install an older binary when the nixpkgs one is newer than our
requirement
- Add a workaround for [this cargo-about
issue](https://github.com/zed-industries/zed/issues/19971) obviating the
need for the patching done in the nixpkgs package
- Set the new `--frozen` flag to avoid network access/mutating the
lockfile
- Use dynamic webrtc lib from nixpkgs, and fixes up the build script in
webrtc-sys that hardcodes it to be statically linked.
- Use `inputsFrom` in `shell.nix` and avoid duplicating everything from
`build.nix`
- Add a temporary workaround for an [upstream crane
bug](https://github.com/ipetkov/crane/issues/808).
- Fix shebangs in our `script` dir to not hard-code `/bin/bash`
There are still a bunch of issues that aren't resolved here, I'll make a
tracking issue for those and try to land this first just to get back to
an unbroken state. Eventually among other things I'd like to use a
`libgit2` from `staticPkgs` and musl cross compilation to build the
remote server under nix, and then add that as a separate flake output
and include it in the shell's `inputsFrom` list.
Thanks @niklaskorz, @GaetanLepage, @bbigras and all the other nixpkgs
maintainers that have kept the `zed-editor` package working and up to
date! I seriously considered just making our flake `overrideAttrs` the
package in nixpkgs given how well maintained it is.
Thanks @WeetHet for your volunteer maintinance of this flake. I
referenced #24953 while working on these fixes, and I'd love to
collaborate on adding some of those pieces like treefmt and a github
action. If you're interested I'd really appreciate some help debugging
why crane's `buildDepsOnly` isn't working for us. I'm assuming it'd make
our `nix build` times go way down from the improved dep caching if we
could get it working.
Thanks @rrbutani for all the help on this PR 💙.
Release Notes:
- N/A
---------
Co-authored-by: Rahul Butani <rrbutani@users.noreply.github.com>
Co-authored-by: Rahul Butani <rr.butani@gmail.com>
Modified version of #25950. We still use worktree paths, but repo paths
with a status that lie outside the worktree are not excluded; instead,
we relativize them by adding `..`. This makes the list in the git panel
match what you'd get from running `git status` (with the repo's worktree
root as the working directory).
- [x] Implement + test new unrelativization logic
- [x] ~~When collecting repositories, dedup by .git abs path, so
worktrees can share a repo at the project level~~ dedup repos at the
repository selector layer, with repos coming from larger worktrees being
preferred
- [x] Open single-file worktree with diff when activating a path not in
the worktree
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/25701
Reworks the way cmd-click is handled:
* first, all worktree entries are checked for existence
This allows more fine-grained lookup of entries that are in the
worktree, but their path in the terminal is not "full": in case neither
`cwd` no worktree's root + that temrinal paths form a valid path
(https://github.com/zed-industries/zed/issues/25701)
The worktrees are sorted by "the most close to cwd first" so such files
are attempted to resolved in the most specific worktree.
This also fixes no cmd-click working in the remote ssh.
* second, only if the client is local, do the FS checks to find
non-indexed files
Release Notes:
- Improved cmd-click in terminal to find more paths
These changes tackle two issues with running terminal commands via vim
mode:
- When using `!!` the tab's title was set to `!!` instead of the
previous command that was run and these changes fix that in order to
always display the previous command in the tab's title when re-running
the command with `!!`
- For a terminal command, pressing the rerun button would actually bring
up the task palette, so this has been updated in order to disable the
rerun button when the terminal tab was spawned via a vim command
Closes#25800
Release Notes:
- Fixed the terminal tab title when using `!!` to rerun the last command
- Improved the terminal tab for when command is run via vim mode, in
order to disable the rerun button, seeing as Zed does not support it
This solves a couple of issues with Vim search by making the search
buffer and `SearchableItem` aware of the direction of the search. If
`SearchOptions::BACKWARDS` is set, all operations will be reversed. By
making `SearchableItem` aware of the direction, the correct active match
can be selected when searching backward.
Fixes#22506. This PR does not fix the last problem in that issue, but
that one is also tracked in #8049.
Release Notes:
- Fixes incorrect behavior of backward search in Vim mode
Closes#7145
Currently, terminal persistence is global, i.e. split configurations are
restored across all workspaces.
This PR changes it to per-workspace, so configurations are restored only
within the same workspace. Opening a new window will start with a fresh
terminal.
https://github.com/user-attachments/assets/d43fe747-9f28-4723-b409-e8dbb3a23912
Release Notes:
- Improved terminal reopening to be per workspace instead of global.
This PR addresses 3 issues with the common scrollbar component used in
the Terminal, Outline Panel, etc.
1. Extremely small or invisible scrollbar for long content.
2. Flickering issue when the thumb is already at the bottom-most
position, and the user tries to overscroll.
3. Scrollbar appearing even when there is no excessive content to
scroll.
Before:
<img width="300" alt="image"
src="https://github.com/user-attachments/assets/8a124a72-3b56-4bef-858a-a4942c871829"
/>
After:
<img width="300" alt="Screenshot 2025-02-21 at 3 26 32 AM"
src="https://github.com/user-attachments/assets/2a8a5796-b332-4c06-84b2-226d2de6e300"
/>
Release Notes:
- Fixed extremely small scrollbar thumb for long content in Terminal,
Outline Panel, and more.
---------
Co-authored-by: Danilo <danilo@zed.dev>
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
This reverts commit 9ef0501853 due to a
panic.
```
{
"thread": "main",
"payload": "9 is not a valid char boundary in path \"crates/…/LiveKitBridge/\"",
"location_data": {
"file": "crates/file_finder/src/file_finder.rs",
"line": 646
}
}
```
Release Notes:
- N/A
Done automatically with
> ast-grep -p '$A.background_executor().spawn($B)' -r
'$A.background_spawn($B)' --update-all --globs "\!crates/gpui"
Followed by:
* `cargo fmt`
* Unexpected need to remove some trailing whitespace.
* Manually adding imports of `gpui::{AppContext as _}` which provides
`background_spawn`
* Added `AppContext as _` to existing use of `AppContext`
Release Notes:
- N/A
This PR makes progress on #7711 by identifying any common prefix of the
paths in the file finder's search results, and replacing the "interior"
of that prefix---every path segment but the first and last---with `...`,
when a heuristic indicates that the longest path would otherwise
overflow the modal.
The elision is not applied to any segment that contains a match for the
search query.
There may be more work to do on #7711 in the case of long result paths
that do not share a significant common prefix.
Release Notes:
- Improved display of long paths in the file finder modal
Co-authored-by: Max <max@zed.dev>
Super subtle, but when I initially saw just "Close", I got weirded out
asking myself "why there's a menu item to close the context menu?", to
only then realize that it didn't close the menu, but the terminal _tab_.
Might be obvious, because that's how buffer tabs are labled, but I don't
know, it feels like the redundancy here is overall positive.
Release Notes:
- N/A
