Mistral just released a sota coding model:
https://mistral.ai/news/devstral
This PR adds support for it in both ollama and mistral
Release Notes:
- Add DevstralSmallLatest model to Mistral and Ollama
This PR adds support for [Claude
4](https://www.anthropic.com/news/claude-4).
Release Notes:
- Added support for Claude Opus 4 and Claude Sonnet 4.
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
Closes#31138
Fix edge case where adding newline if there is text afterwards end
delimiter of multiline comment, would continue the comment prefix. This
is fixed by checking for end delimiter on whole line instead of just
assuming it would always be at end.
- [x] Tests
Release Notes:
- Fixed the issue where in some cases the block comment continues to the
next line even though the comment block is already closed.
This affects python's when debugging because the selected toolchain is
used as the python binary to spawn Debugpy
Release Notes:
- Fix bug where selected toolchain didn't exist
This move was done so debug configs could use path resolution, and
saving a configuration from the new session modal wouldn't resolve paths
beforehand.
I also added an integration test to make sure path resolution happens
from an arbitrary config. The test was placed under the new session
modal directory because it has to do with starting a session, and that's
what the new session modal typically does, even if it's implicitly used
in the test.
In the future, I plan to add more tests to the new session modal too.
Release Notes:
- debugger beta: Allow configs from debug.json to resolve paths
Part of #31174
Because the keyboard layout parameter wasn’t set correctly, characters
don’t show up properly when using the German layout at launch.
To reproduce:
Switch to the German layout, launch Zed, and press the `7` key. it
should output `7`, but instead it outputs `è`.
Release Notes:
- N/A
Closes #ISSUE
Release Notes:
- debugger: Use integrated terminal for Python, allowing one to interact
with standard input/output when debugging Python projects.
The docs include basic information on starting a session but will need
to be further iterated upon once we get deeper into the beta
Release Notes:
- N/A
Closes#28164
This PR adresses inproper keybinds being shown in MacOS application
menus. The issue arises because the keybinds shown in MacOS application
menus are unaware of keybind contexts (they are only ever updated [on a
keymap-change](6d1dd109f5/crates/zed/src/zed.rs (L1421))).
Thus, using the keybind that was added last in the keymap can result in
incorrect keybindings being shown quite frequently, as they might belong
to a different context not generally available (applies the same for the
default keymap as well as for user-keymaps).
For example, the linked issue arises because the keybind found last in
the iterator is
6d1dd109f5/assets/keymaps/vim.json (L759),
which is not even available in most contexts (and, additionally, the `e`
of `escape` is rendered here as a keybind which seems to be a seperate
issue).
Additionally, this would result in inconsistent behavior with some
Vim-keybinds. A vim-keybind would be used only when available but
otherwise the default binding would be shown (see `Undo` and `Redo` as
an example below), which seems inconsistent.
This PR fixes this by instead using the first keybind found in keymaps,
which is expected to be the keybind available in most contexts.
Additionally, this allows rendering some more keybinds for actions which
vim-keybind cannot be displayed (Find In Project for example) .This
seems to be more reasonable until [this related
comment](6d1dd109f5/crates/gpui/src/keymap.rs (L199-L204))
is resolved.
This includes a revert of #25878 as well. With this change, the change
made in #25878 becomes obsolete and would also regress the behavior back
to the state prior to that PR.
| | `main` | This PR |
| --- | --- | --- |
| Edit-menu | <img width="220" alt="main_edit"
src="https://github.com/user-attachments/assets/9f793b64-80b6-4a5b-b7e5-628f0d552166"
/> | <img width="220" alt="PR_edit"
src="https://github.com/user-attachments/assets/bccb444c-7a49-41d5-9377-d90b1639a3ed"
/> |
| View-menu | <img width="214" alt="main_view"
src="https://github.com/user-attachments/assets/0e6a6632-df02-4883-9f5a-facb4d0263b5"
/> | <img width="214" alt="PR_view"
src="https://github.com/user-attachments/assets/14600ece-fcaa-447a-94ef-4fa350eca49c"
/> |
Release Notes:
- Improved keybinds displayed for actions in MacOS application menus.
We now actually call dap_schema provided by extensions instead of
defaulting to a null `serde_json::Value`. We still need to update the
Json LSP whenever a new dap is installed.
Release Notes:
- N/A
@Anthony-Eid I'm pretty sure this maintains the behavior of #30680, and
I added some tests to be sure.
Release Notes:
- `~` now expands to the home directory in the debugger launch modal.
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
This includes the following data:
- Where we spawned the session from (gutter, scenario list, custom form
filled by the user)
- Which debug adapter was used
- Which dock the debugger is in
Closes #ISSUE
Release Notes:
- debugger: Added telemetry for new session experience that includes
data about:
- How a session was spawned (gutter, scenario list or custom form)
- Which debug adapter was used
- Which dock the debugger is in
---------
Co-authored-by: Joseph T. Lyons <JosephTLyons@gmail.com>
/cc @osiewicz
I think bringing this back should fix **bloveless** his issue with go
debugger.
This is also nice, so people are not forced to give us a working
directory, because most adapters will use their **cwd** as the project
root directory. For JavaScript, you don't need to specify the **cwd**
anymore because it can already infer it
Release Notes:
- debugger beta: Fixed some adapters fail to determine the right root level of the
debug program.
This PR allows DAPs to define their own schema so users can see
completion items when editing their debug.json files.
Users facing this aren’t the biggest chance, but behind the scenes, this
affected a lot of code because we manually translated common fields from
Zed's config format to be adapter-specific. Now we store the raw JSON
from a user's configuration file and just send that.
I'm ignoring the Protobuf CICD error because the DebugTaskDefinition
message is not yet user facing and we need to deprecate some fields in
it.
Release Notes:
- debugger beta: Show completion items when editing debug.json
- debugger beta: Breaking change, debug.json schema now relays on what
DAP you have selected instead of always having the same based values.
---------
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Co-authored-by: Cole Miller <m@cole-miller.net>
Co-authored-by: Cole Miller <cole@zed.dev>
This change improves `eval_extract_handle_command_output` results for
all models:
Model | Pass rate before | Pass rate after
----------------------------|------------------|----------------
claude-3.7-sonnet | 0.96 | 0.98
gemini-2.5-pro | 0.35 | 0.86
gpt-4.1 | 0.81 | 1.00
Part of this improvement comes from more robust evaluation, which now
accepts multiple possible outcomes. Another part is from the prompt
adaptation: addressing common Gemini failure modes, adding a few-shot
example, and, in the final commit, auto-rewriting instructions for
clarity and conciseness.
This change still needs validation from larger end-to-end evals.
Release Notes:
- N/A
- Remove the modules list and loaded sources list from the default
layout
- Move the console to the center pane so it's visible initially
Release Notes:
- Debugger Beta: changed the default layout of the debugger panel,
hiding the modules list and loaded sources list by default and making
the console more prominent.
---------
Co-authored-by: Remco Smits <djsmits12@gmail.com>
- Add missing handler for `debugger::Continue` so `f5` works
- Add bindings based on VS Code for `debugger::Restart` and
`debug_panel::ToggleFocus`
- Remove breakpoint-related buttons from the debug panel's top strip,
and surface the bindings for `editor::ToggleBreakpoint` in gutter
tooltip instead
Release Notes:
- Debugger Beta: Added keybindings for `debugger::Continue`,
`debugger::Restart`, and `debug_panel::ToggleFocus`.
- Debugger Beta: Removed breakpoint-related buttons from the top of the
debug panel.
- Compatibility note: on Linux, `ctrl-shift-d` is now bound to
`debug_panel::ToggleFocus` by default, instead of
`editor::DuplicateLineDown`.
Makes it possible to open and navigate these menus from the keyboard.
I also removed the eager previewing behavior for the thread picker,
which was buggy and came with a jarring layout shift.
Release Notes:
- Debugger Beta: Added the `debugger: open thread picker` and `debugger:
open session picker` actions.
Closes#31115
This fixes regression caused by
https://github.com/zed-industries/zed/pull/30824 while keeping that fix.
- [x] Test
Release Notes:
- Fixed the issue where adding a newline after the `///` comment would
extend it with `//` instead of `///` in Rust and other similar
languages.
This PR makes it so we always prefer the plan on the subscription.
The plan stored on the subscription usage is informational only.
Release Notes:
- N/A
This PR brings back https://github.com/zed-industries/zed/pull/30969 and
adds some initial testing.
https://github.com/zed-industries/zed/pull/30969 did indeed allow Zed to
continue doing downloads after downloading one, but it introduced a bug
where Zed would download a new binary every time it polled, even if the
version was the same as the running instance.
This code could use a refactor to allow more / better testing, but this
is a start.
Release Notes:
- N/A
TODO:
- [x] Release a new version of `zed_llm_client`
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Issues: #30994
I've implemented an important optimisation in response to GitHub
Copilot's recent rate limit on concurrent Vision API calls. Previously,
our system was defaulting to vision header: true for all API calls. To
prevent unnecessary calls and adhere to the new limits, I've updated our
logic: the vision header is now only sent if the current message is a
vision message, specifically when the preceding message includes an
image.
Prompt used to reproduce and verify the fix: `Give me a context for my
agent crate about. Browse my repo.`
Release Notes:
- copilot: Set Copilot-Vision-Request header based on message content
Closes#5255, #1046, #28322, #15728
This PR makes `AddSelectionBelow` and `AddSelectionAbove` not skip lines
that are shorter than the current cursor column. This follows the same
behavior as VSCode and Sublime.
This change is only applicable in the case of an empty selection; if
there is a non-empty selection, it continues to skip empty and shorter
lines to create a Vim-like column selection, which is the better default
for that case.
- [x] Tests
The empty selection no longer skips shorter lines:
https://github.com/user-attachments/assets/4bde2357-20b6-44f2-a9d9-b595c12d3939
Non-empty selection continues to skip shorter lines.
https://github.com/user-attachments/assets/4cd47c9f-b698-40fc-ad50-f2bf64f5519b
Release Notes:
- Improved `AddSelectionBelow` and `AddSelectionAbove` to no longer skip
shorter lines when the selection is empty, aligning with VSCode and
Sublime behavior.
The panic occurred when querying a second search in the project search
multibuffer while there were dirty buffers.
The panic only happened in Nightly so there's no release notes
Release Notes:
- N/A
1. Add system prompt: this is how it's called from threads. Previously,
we were sending
2. Fix an issue with writing agent thought into a newly created empty
file.
Release Notes:
- N/A
---------
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Currently, `search::ReplaceNext` works only first time it is executed
because Zed switches the focus to the editor. It seems
`self.editor_focus` call is unnecessary.
Closes#17466
Release Notes:
- Fixed `Replace Next Match` command. Previously it worked once, then
Zed incorrectly switched the focus to the editor
https://github.com/user-attachments/assets/66ef61d6-1efe-43ca-8d8c-6b40540a9930
In accordance with #30327, I saw no reason for included files to get
special treatment, and I actually get use out of prefilling excluded
files because I like not to search symlinked files which, in my
workflow, use a naming convention.
This is simply implementing the same exact changes, but for excluded. It
was tested with `"space /": ["pane::DeploySearch", { "excluded_files":
"**/_*.tf" }]` and works just fine.
Release Notes:
- Added `excluded_files` to `pane::DeploySearch`.
Builds on top of https://github.com/zed-industries/zed/pull/30942
This turns on incremental compilation and decreases extension
compilation times by up to another 41%
Putting us at roughly 92% improved extension load times from what is in
the app today.
Because we only have a static engine, I can't reset the cache between
every run. So technically the benchmarks are always running with a
warmed cache. So the first extension we load will take the 8.8ms, and
then any subsequent extensions will be closer to the measured time in
this benchmark.
This is also measuring the entire load process, not just the
compilation. However, since this is the loading we likely think of when
thinking about extensions, I felt it was likely more helpful to see the
impact on the overall time.
This works because our extensions are largely the same Wasm bytecode
(SDK code + std lib functions etc) with minor changes in the trait impl.
The more different that extensions implementation is, there will be less
benefit, however, there will always be a large part of every extension
that is always the same across extensions, so this should be a speedup
regardless.
I used `moka` to provide a bound to the cache. We could use a bare
`DashMap`, however if there was some issue this could lead to a memory
leak. `moka` has some slight overhead, but makes sure that we don't go
over 32mb while using an LRU-style mechanism for deciding which
compilation artifacts to keep.
I measured our current extensions to take roughly 512kb in the cache.
Which means with a cap of 32mb, we can keep roughly 64 *completely
novel* extensions with no overlap. Since our extensions will have more
overlap than this though, we can actually keep much more in the cache
without having to worry about it.
#### Before:
```
load/1 time: [8.8301 ms 8.8616 ms 8.8931 ms]
change: [-0.1880% +0.3221% +0.8679%] (p = 0.23 > 0.05)
No change in performance detected.
```
#### After:
```
load/1 time: [5.1575 ms 5.1726 ms 5.1876 ms]
change: [-41.894% -41.628% -41.350%] (p = 0.00 < 0.05)
Performance has improved.
```
Release Notes:
- N/A
