This removes around 900 unnecessary clones, ranging from cloning a few
ints all the way to large data structures and images.
A lot of these were fixed using `cargo clippy --fix --workspace
--all-targets`, however it often breaks other lints and needs to be run
again. This was then followed up with some manual fixing.
I understand this is a large diff, but all the changes are pretty
trivial. Rust is doing some heavy lifting here for us. Once I get it up
to speed with main, I'd appreciate this getting merged rather sooner
than later.
Release Notes:
- N/A
Temporarily fixes#29133
Co-authored-by: Cole <cole@zed.dev>
Release Notes:
- python: Zed now reports a slightly different set of workspace folders
for Python projects to work around quirks in handling of multi-lsp
projects with virtual environment. This behavior will be revisited in a
near future.
Co-authored-by: Cole <cole@zed.dev>
Closes #ISSUE
Adds a new `documentation` method to actions, that is extracted from doc
comments when using the `actions!` or derive macros.
Additionally, this PR adds doc comments to as many action definitions in
Zed as possible.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Mistake in #31863 where the stored log entries no longer had a format
that could simply have `\n` added after each entry.
Also fixes a potential crash in the long line folding logic if unicode
was in the logs - introduced in #22996.
Also updates the log line truncation logic to never exceed the
pre-allocated capacity
Release Notes:
- N/A
This PR contains some small improvements for the language server log
editors. Due to the large gutter as well as the introduction of the
minimap, the horizontally available space was rather small. As these
editors soft wrap at the editor width, it resulted in the logs becoming
vertically larger and somewhat harder to read.
The improvement here is to disable all elements in the gutter that will
never appear or be used in the logs anyway. Furthermore, I opted to
disable the minimap altogether, since from my point of view it did not
contain any valuable information about the logs being shown.
First image is the current main, second is this branch. I put these
below each other so the difference is easier to spot.
Release Notes:
- N/A
Closes #ISSUE
Release Notes:
- Breaking change: The actions used while developing Zed have been
renamed from `debug:` to `dev:` to avoid confusion with the new debugger
feature:
- - `dev::OpenDebugAdapterLogs`
- - `dev::OpenSyntaxTreeView`
- - `dev::OpenThemePreview`
- - `dev::OpenLanguageServerLogs`
- - `dev::OpenKeyContextView`
resolves#24655resolves#23945
I haven't yet added a default binding for the new command. #27797 added `:ls` and
`:buffers` which in my opinion should use the global searchable version
given that that matches the vim semantics of those commands better than
just showing the tabs in the local pane.
There's also a question of what to do when you select a tab from another
pane, should the focus jump to that pane or should that tab move to the
currently focused pane? For now I've implemented the former.
Release Notes:
- Added `tab_switcher::ToggleAll` to search open tabs from all panes and focus the selected one.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR changes the thread list dropdown menu in the debugger UI to
eagerly preview the state of a thread when selecting it, instead of
waiting until confirming the selection.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/14334, allowing
users to set environment variables for a language server binary like:
```json
"lsp": {
"rust-analyzer": {
"binary": {
"path": "/Users/dbarsky/.cargo/bin/rust-analyzer",
"env": {
"RA_PROFILE": "*>100"
}
},
}
}
```
The newly introduced environment variables are merged with the shell
environment. Perhaps more controversially, I've _also_ removed the
trimming/`stderr:`-prefixing of language server logs. This because
rust-analyzer has some nice, tree-shaped profiling built-in, and it
prevents us from printing profiles like this:
<details>
<img width="1147" alt="Screenshot 2025-03-20 at 12 09 14 PM"
src="https://github.com/user-attachments/assets/b7066651-6394-492b-b745-906c66d3c7b2"
/>
</details>
Release Notes:
- Added the ability to set a language server's environment variables.
- Removed the `stderr`-prefix of a language server's stderr logs.
This is the core change:
https://github.com/zed-industries/zed/pull/26758/files#diff-044302c0d57147af17e68a0009fee3e8dcdfb4f32c27a915e70cfa80e987f765R1052
TODO:
- [x] Use AsyncFn instead of Fn() -> Future in GPUI spawn methods
- [x] Implement it in the whole app
- [x] Implement it in the debugger
- [x] Glance at the RPC crate, and see if those box future methods can
be switched over. Answer: It can't directly, as you can't make an
AsyncFn* into a trait object. There's ways around that, but they're all
more complex than just keeping the code as is.
- [ ] Fix platform specific code
Release Notes:
- N/A
This solves a couple of issues with Vim search by making the search
buffer and `SearchableItem` aware of the direction of the search. If
`SearchOptions::BACKWARDS` is set, all operations will be reversed. By
making `SearchableItem` aware of the direction, the correct active match
can be selected when searching backward.
Fixes#22506. This PR does not fix the last problem in that issue, but
that one is also tracked in #8049.
Release Notes:
- Fixes incorrect behavior of backward search in Vim mode
We were reading edit prediction settings too often, causing frames to be
dropped. We'll now cache them and update them from
`update_visible_inline_completion`.
Release Notes:
- N/A
There's still a bit more work to do on this, but this PR is compiling
(with warnings) after eliminating the key types. When the tasks below
are complete, this will be the new narrative for GPUI:
- `Entity<T>` - This replaces `View<T>`/`Model<T>`. It represents a unit
of state, and if `T` implements `Render`, then `Entity<T>` implements
`Element`.
- `&mut App` This replaces `AppContext` and represents the app.
- `&mut Context<T>` This replaces `ModelContext` and derefs to `App`. It
is provided by the framework when updating an entity.
- `&mut Window` Broken out of `&mut WindowContext` which no longer
exists. Every method that once took `&mut WindowContext` now takes `&mut
Window, &mut App` and every method that took `&mut ViewContext<T>` now
takes `&mut Window, &mut Context<T>`
Not pictured here are the two other failed attempts. It's been quite a
month!
Tasks:
- [x] Remove `View`, `ViewContext`, `WindowContext` and thread through
`Window`
- [x] [@cole-miller @mikayla-maki] Redraw window when entities change
- [x] [@cole-miller @mikayla-maki] Get examples and Zed running
- [x] [@cole-miller @mikayla-maki] Fix Zed rendering
- [x] [@mikayla-maki] Fix todo! macros and comments
- [x] Fix a bug where the editor would not be redrawn because of view
caching
- [x] remove publicness window.notify() and replace with
`AppContext::notify`
- [x] remove `observe_new_window_models`, replace with
`observe_new_models` with an optional window
- [x] Fix a bug where the project panel would not be redrawn because of
the wrong refresh() call being used
- [x] Fix the tests
- [x] Fix warnings by eliminating `Window` params or using `_`
- [x] Fix conflicts
- [x] Simplify generic code where possible
- [x] Rename types
- [ ] Update docs
### issues post merge
- [x] Issues switching between normal and insert mode
- [x] Assistant re-rendering failure
- [x] Vim test failures
- [x] Mac build issue
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Joseph <joseph@zed.dev>
Co-authored-by: max <max@zed.dev>
Co-authored-by: Michael Sloan <michael@zed.dev>
Co-authored-by: Mikayla Maki <mikaylamaki@Mikaylas-MacBook-Pro.local>
Co-authored-by: Mikayla <mikayla.c.maki@gmail.com>
Co-authored-by: joão <joao@zed.dev>
This PR introduces a new entity called Project Tree which is responsible
for finding subprojects within a worktree;
a subproject is a language-specific subset of a worktree which should be
accurately tracked on the language server side. We'll have an ability to
set multiple disjoint workspaceFolders on language server side OR spawn
multiple instances of a single language server (which will be the case
with e.g. Python language servers, as they need to interact with
multiple disjoint virtual environments).
Project Tree assumes that projects of the same LspAdapter kind cannot
overlap. Additionally project nesting is not allowed within the scope of
a single LspAdapter.
Closes https://github.com/zed-industries/zed/issues/5108
Re-lands #22182 which I had to revert due to merging it into todays
Preview.
Release Notes:
- Language servers now track their working directory more accurately.
---------
Co-authored-by: João <joao@zed.dev>
This PR introduces a new entity called Project Tree which is responsible
for finding subprojects within a worktree;
a subproject is a language-specific subset of a worktree which should be
accurately tracked on the language server side. We'll have an ability to
set multiple disjoint `workspaceFolder`s on language server side OR
spawn multiple instances of a single language server (which will be the
case with e.g. Python language servers, as they need to interact with
multiple disjoint virtual environments).
Project Tree assumes that projects of the same LspAdapter kind cannot
overlap. Additionally **project nesting** is not allowed within the
scope of a single LspAdapter.
Closes#5108
Release Notes:
- Language servers now track their working directory more accurately.
---------
Co-authored-by: João <joao@zed.dev>
In current code this doesn't have benefit. In preparation for avoiding a
clone of workspace configuration. Having the interface this way may make
opportunities for efficiency clearer in the future
Release Notes:
- N/A
Not sure why scroll was janky with `Autoscroll::newest()`, but this
appears to fix it. Probably better to conditionally do the autoscroll
requests anyway.
Release Notes:
- N/A
Closes#18737
Release notes:
- Improved LSP debug logs by defaulting to soft wrap and folding a
suffix of long lines. Also adds autoscroll, so if the cursor is on the
last line of the logs they will scroll like `tail`.
