Closes#27596
The problem in this case was incorrect identification of which language
(layer) contains the selection.
Language layer selection incorrectly assumed that the deepest
`SyntaxLayer` containing a range was the most specific. This worked for
Markdown (base document + injected subtrees) but failed for PHP, where
`injection.combined` injections are used to make HTML logically function
as the base layer, despite being at a greater depth in the layer stack.
This caused HTML to be incorrectly identified as the most specific
language for PHP ranges.
The solution is to track included sub-ranges for syntax layers and
filter out layers that don't contain a sub-range covering the desired
range. The top-level layer is never filtered to ensure gaps between
sibling nodes always have a fallback language, as the top-level layer is
likely more correct than the default language settings.
Release Notes:
- Fixed an issue in PHP where PHP language settings would be
occasionally overridden by HTML language settings
Follow-up of https://github.com/zed-industries/zed/pull/19230
* starts to send `result_id` in pull requests to allow servers to reply
with non-full results
* fixes a bug where disk-based diagnostics were offset after pulling the
diagnostics
* fixes a bug due to which pull diagnostics could not be disabled
* uses better names and comments for the workspace pull diagnostics part
Release Notes:
- N/A
This is a small PR that adds a `.jsdoc` scope to JSDoc tokens, just like
[JSX](3fdbc3090d/crates/languages/src/javascript/highlights.scm (L239))
has a specific scope.
This effectively allows differentiating between JavaScript keywords and
JSDoc tags in comments.
Release Notes:
- Add scope for JSDoc
Part of #28238
This PR refactors `FindHyperlink` handling and associated code in
`terminal.rs` into its own file for improved testability, and adds
tests.
Release Notes:
- N/A
This allows storing the profile per thread, as well as moving the logic
of which tools are enabled or not to the profile itself.
This makes it much easier to switch between profiles, means there is
less global state being changed on every profile change.
Release Notes:
- agent panel: allow saving the profile per thread
---------
Co-authored-by: Ben Kunkle <ben.kunkle@gmail.com>
A minor refactor ~needed to unblock #22546; it's pretty hard to add an
extra field to `diff_transforms` dimension, as it is a 2-tuple (which
uses a blanket impl)
Release Notes:
- N/A
Fixes rendering of colors in the terminal to use XTerm's idiosyncratic standard steps instead of the range that was previously in use. Matches the behavior of Alacritty, Ghostty, iTerm2, and every other terminal emulator I've looked at.
Release Notes:
- Fixed rendering of terminal colors for the XTerm 256-color indexed color palette.
This PR fixes some broken links that where found using
[lychee](https://github.com/lycheeverse/lychee/) as discussed today with
@JosephTLyons and @nathansobo at the RustNL hackathon. Using
[lychee-action](https://github.com/lycheeverse/lychee-action/) we can
scan for broken links daily to prevent issues in the future.
There are still 6 broken links that I didn't know how to fix myself.
See https://github.com/thomas-zahner/zed/actions/runs/15075808232 for
details.
## Missing images
```
Errors in ./docs/src/channels.md
[ERROR] file:///home/runner/work/zed/zed/docs/.gitbook/assets/channels-3.png | Cannot find file
[ERROR] file:///home/runner/work/zed/zed/docs/.gitbook/assets/channels-1.png | Cannot find file
[ERROR] file:///home/runner/work/zed/zed/docs/.gitbook/assets/channels-2.png | Cannot find file
```
These errors are showing up as missing images on
https://zed.dev/docs/channels
I tried to search the git history to see when or why they were deleted
but didn't find anything.
## ./crates/assistant_tools/src/edit_agent/evals/fixtures/zode/prompt.md
There are three errors in that file. I don't fully understand how these
issues were caused historically. Technically it would be possible to
ignore the files but of course if possible we should address the issues.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Co-authored-by: Ben Kunkle <ben@zed.dev>
Closes#31491
### Problem
Mistral API enforces strict conversation flow requirements that other
providers don't. Specifically, after a `tool` message, the next message
**must** be from the `assistant` role, not `user`. This causes the
error:
```
"Unexpected role 'user' after role 'tool'"
```
This can also occur in normal conversation flow where mistral doesn't
return the assistant message but that is something which can't be
reproduce reliably.
### Root Cause
When users interrupt an ongoing tool call sequence by sending a new
message, we insert a `user` message directly after a `tool` message,
violating Mistral's protocol.
**Expected Mistral flow:**
```
user → assistant (with tool_calls) → tool (results) → assistant (processes results) → user (next input)
```
**What we were doing:**
```
user → assistant (with tool_calls) → tool (results) → user (interruption) ❌
```
### Solution
Insert an empty `assistant` message between any `tool` → `user` sequence
in the Mistral provider's request construction. This satisfies Mistral's
API requirements without affecting other providers or requiring UX
changes.
### Testing
To reproduce the original error:
1. Start agent chat with `codestral-latest`
2. Send: "Describe this project using tool call only"
3. Once tool calls begin, send: "stop this"
4. Main branch: API error
5. This fix: Works correctly
Release Notes:
- Fixed Mistral tool calling in some cases
Ideally we would show multi-keystroke binding, but I'd say this improves
over the status quo.
A partial solution to #27334
Release Notes:
- Fixed spurious warning for lack of edit prediction on multi-keystroke
binding
Co-authored-by: Ben Kunkle <ben@zed.dev>
Now immediately initializes the zlog filter even when there isn't an env
config. Before this change the default filters were applied after
settings load - I was seeing some `zbus` logs on init.
Also defaults to allowing warnings and errors from the suppressed log
sources. If these turn out to be chatty (they don't seem to be so far),
can bring back more suppression.
Release Notes:
- N/A
Fixes two things:
* ~3 months ago [in PR
#26420](https://github.com/zed-industries/zed/pull/26420/files#diff-33b58aa2da03d791c2c4761af6012851b7400e348922d64babe5fd48ac2a8e60)
`bindings_for_action` was changed to return bindings even when they are
shadowed (when the keystrokes would actually do something else).
* For edit prediction keybindings there was some odd behavior where
bindings for `edit_prediction_conflict` were taking precedence over
bindings for `edit_prediction` even when the `edit_prediction_conflict`
predicate didn't match. The workaround for this was #24812. The way it
worked was:
- List all bindings for the action
- For each binding, get the highest precedence binding with the same
input sequence
- If the highest precedence binding has the same action, include this
binding. This was the bug - this meant that if a binding in the keymap
has the same keystrokes and action it can incorrectly take display
precedence even if its context predicate does not pass.
- Fix is to check that the highest precedence binding is a full match.
To do this efficiently, it's based on an index within the keymap
bindings.
Also adds `highest_precedence_binding_*` variants which avoid the
inefficiency of building lists of bindings just to use the last.
Release Notes:
- Fixed display of keybindings to skip bindings that are shadowed by a
binding that uses the same keystrokes.
- Fixed display of `editor::AcceptEditPrediction` bindings to use the
normal precedence that prioritizes user bindings.
Cleaner to have references to this be `toast::RunAction` matching how it
appears in the keymap, instead of `workspace::RunAction`.
Release Notes:
- N/A
Closes#27998
Also fixed an issue where jumping back from closing to opening tags
didn't work in javascript due to missing brackets in our tree-sitter
query.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#31648
This PR adds support for:
- Expanding multiple cursors above/below
- Expanding multiple selections above/below
- Adding new cursors/selections when expansion has already been done.
Existing expansions preserve their state and expand/shrink according to
the action, while new cursors/selections act like freshly created ones.
Tests for both cursor and selections:
- below/above cases
- undo/redo cases
- adding new cursors/selections with existing expansion
Before/After:
https://github.com/user-attachments/assets/d2fd556b-8972-4719-bd86-e633d42a1aa3
Release Notes:
- Improved `AddSelectionAbove` and `AddSelectionBelow` to extend
multiple cursors/selections.
* `state.last_options` was never being updated, so the caching wasn't
working.
* If node on the PATH was too old it was logging errors on every
invocation even though managed node is being used.
Release Notes:
- Fixed caching of Node.js runtime paths and improved error messages.
Replace hardcoded 0.10 threshold with configurable parameter and set
0.05 default for most tests, with 0.2 for from_pixels_constructor
eval that produces more mismatched tags.
Release Notes:
- N/A
Closes#27567
Release Notes:
- Fixed default keybindings for `editor::AcceptPartialEditPrediction` to
work with subtle mode.
Co-authored-by: Richard <richard@zed.dev>
Closes [#13107](https://github.com/zed-industries/zed/issues/13107)
Enabled pull diagnostics by default, for the language servers that
declare support in the corresponding capabilities.
```
"diagnostics": {
"lsp_pull_diagnostics_debounce_ms": null
}
```
settings can be used to disable the pulling.
Release Notes:
- Added support for the LSP `textDocument/diagnostic` command.
# Brief
This is draft PR that implements the LSP `textDocument/diagnostic`
command. The goal is to receive your feedback and establish further
steps towards fully implementing this command. I tried to re-use
existing method and structures to ensure:
1. The existing functionality works as before
2. There is no interference between the diagnostics sent by a server and
the diagnostics requested by a client.
The current implementation is done via a new LSP command
`GetDocumentDiagnostics` that is sent when a buffer is saved and when a
buffer is edited. There is a new method called `pull_diagnostic` that is
called for such events. It has debounce to ensure we don't spam a server
with commands every time the buffer is edited. Probably, we don't need
the debounce when the buffer is saved.
All in all, the goal is basically to get your feedback and ensure I am
on the right track. Thanks!
## References
1.
https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#textDocument_pullDiagnostics
## In action
You can clone any Ruby repo since the `ruby-lsp` supports the pull
diagnostics only.
Steps to reproduce:
1. Clone this repo https://github.com/vitallium/stimulus-lsp-error-zed
2. Install Ruby (via `asdf` or `mise).
4. Install Ruby gems via `bundle install`
5. Install Ruby LSP with `gem install ruby-lsp`
6. Check out this PR and build Zed
7. Open any file and start editing to see diagnostics in realtime.
https://github.com/user-attachments/assets/0ef6ec41-e4fa-4539-8f2c-6be0d8be4129
---------
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Problem:
Initial keymap has "j k" keymap, which if uncommented will add +-1s
delay to every "j" key press
This workaround was taken from
https://github.com/zed-industries/zed/discussions/6661
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: Michael Sloan <michael@zed.dev>
- [x] pass LSP tasks into list_debug_scenarios
- [x] load LSP tasks only once for both modals
- [x] align ordering
- [x] improve appearance of LSP debug task icons
- [ ] reconsider how `add_current_language_tasks` works
- [ ] add a test
Release Notes:
- Debugger Beta: Added debuggable LSP tasks to the "Debug" tab of the
new process modal.
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Here’s how it looks after the fix:
.
White is white and black is black, as intended.
In some cases, dimmed colors were poorly defined, so I took
`text.dimmed` values.
Note that white is defined exactly as the background color for light
themes. Similarly, black is the exact background color for dark themes.
I didn’t change this, but many themes intentionally make white and black
slightly different from the background color. This prevents issues where
programs assume, say, a dark background and set the foreground to white,
making text invisible. I'm not sure if we want to adjust these themes to
address this; just noting it here.
Closes#29379
Release Notes:
- Fixed ANSI black and ANSI white colors in built-in themes
Closes#31438
Release Notes:
- agent: Fixed an edge case were the request would fail when using
Claude and multiple images were attached
---------
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
I think using `Debugger Program` and `~/bin/debugger` here makes it seem
like that field is for specifying the path to the debugger itself, and
not the program being debugged.
Release Notes:
- N/A
This PR improves key handling on Windows by moving the
`TranslateMessage` call from the message loop to after we handled
`WM_KEYDOWN`. This brings Windows behavior more in line with macOS and
gives us finer control over key events. As a result, Vim keybindings now
work properly even when an IME is active. The trade-off is that it might
introduce a slight delay in text input.
Release Notes:
- N/A
